MITSUBISHI SEMICONDUCTOR 〈THYRISTOR〉 CR8PM MEDIUM POWER USE INSULATED TYPE, GLASS PASSIVATION TYPE OUTLINE DRAWING CR8PM Dimensions in mm 10.5 MAX 2.8 8.5 17 5.0 1.2 5.2 TYPE NAME φ3.2±0.2 VOLTAGE CLASS 13.5 MIN 3.6 1.3 MAX 0.8 2.54 123 IT (AV) ........................................................................... 8A VDRM .............................................................. 400V/600V IGT .......................................................................... 15mA Viso ........................................................................ 1500V UL Recognized: File No. E80276 0.5 2.6 ∗ Measurement point of case temperature 4.5 • • • • • 2.54 2 1 CATHODE 2 ANODE 3 GATE 3 1 TO-220F APPLICATION Switching mode power supply, ECR, regulator for autocycle, motor control MAXIMUM RATINGS Symbol (Ta=25°C, unless otherwise noted) Voltage class Parameter 8 12 Unit VRRM Repetitive peak reverse voltage 400 600 V VRSM Non-repetitive peak reverse voltage 500 720 V VR (DC) DC reverse voltage 320 480 V VDRM Repetitive peak off-state voltage 400 600 V VD (DC) DC off-state voltage 320 480 V Symbol Parameter Ratings Unit 12.6 A Commercial frequency, sine half wave, 180° conduction, Tc=81°C 8.0 A Surge on-state current 60Hz sine half wave 1 full cycle, peak value, non-repetitive 120 A I2t I2t Value corresponding to 1 cycle of half wave 60Hz, surge on-state current 60 A2s PGM Peak gate power dissipation 5.0 W PG (AV) Average gate power dissipation 0.5 W VFGM Peak gate forward voltage 6.0 V VRGM Peak gate reverse voltage 10 V IFGM Peak gate forward current 2.0 Tj Junction temperature IT (RMS) RMS on-state current IT (AV) Average on-state current ITSM Tstg Storage temperature — Viso for fusing Conditions Weight Typical value Isolation voltage Ta=25°C, AC 1 minute, each terminal to case A –40 ~ +125 °C –40 ~ +125 °C 2.0 g 1500 V Feb.1999 MITSUBISHI SEMICONDUCTOR 〈THYRISTOR〉 CR8PM MEDIUM POWER USE INSULATED TYPE, GLASS PASSIVATION TYPE ELECTRICAL CHARACTERISTICS Parameter Symbol Limits Test conditions Min. Typ. Max. Unit IRRM Repetitive peak reverse current Tj=125°C, V RRM applied — — 2.0 mA IDRM Repetitive peak off-state current Tj=125°C, V DRM applied — — 2.0 mA VTM On-state voltage Tc=25°C, ITM =25A, instantaneous value — — 1.4 V VGT Gate trigger voltage Ta=25°C, VD =6V, IT =1A — — 1.0 V VGD Gate non-trigger voltage Tj=125°C, VD=1/2VDRM 0.2 — — V IGT Gate trigger current Tj=25°C, VD=6V, IT=1A — — 15 mA IH Holding current Tj=25°C, VD=12V — 1.5 — mA R th (j-c) Thermal resistance Junction to case ✽1 — — 3.7 °C/ W ✽1. The contact thermal resistance R th (j-c) is 0.5°C/W with greased. MAXIMUM ON-STATE CHARACTERISTICS 103 7 Tc = 125°C 5 3 2 102 7 5 3 2 101 7 5 3 2 100 0 1 2 3 4 ON-STATE VOLTAGE (V) 5 RATED SURGE ON-STATE CURRENT 200 SURGE ON-STATE CURRENT (A) ON-STATE CURRENT (A) PERFORMANCE CURVES 180 160 140 120 100 80 60 40 20 0 100 2 3 4 5 7 101 2 3 4 5 7 102 CONDUCTION TIME (CYCLES AT 60Hz) Feb.1999 MITSUBISHI SEMICONDUCTOR 〈THYRISTOR〉 CR8PM MEDIUM POWER USE INSULATED TYPE, GLASS PASSIVATION TYPE GATE TRIGGER CURRENT VS. JUNCTION TEMPERATURE 100 (%) VFGM = 6V 101 7 5 3 2 PGM = 5W PG(AV) = 0.5W VGT = 1V 100 7 5 3 2 IGT = 15mA VGD = 0.2V IFGM = 2A 10–1 5 7 101 2 3 5 7 102 2 3 5 7 103 2 3 5 103 7 5 3 2 TYPICAL EXAMPLE 102 7 5 3 2 101 7 5 3 2 100 –40 –20 0 20 40 60 80 100 120 140 160 GATE CURRENT (mA) JUNCTION TEMPERATURE (°C) GATE TRIGGER VOLTAGE VS. JUNCTION TEMPERATURE MAXIMUM TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (JUNCTION TO CASE) ,,,,,,,,,,,,, ,,,,,,,,,,,,, ,,,,,,,,,,,,, ,,,,,,,,,,,,, ,,,,,,,,,,,,, ,,,,,,,,,,,,, ,,,,,,,,,,,,, ,,,,,,,,,,,,, ,,,,,,,,,,,,, ,,,,,,,,,,,,, 1.0 GATE TRIGGER VOLTAGE (V) GATE TRIGGER CURRENT (Tj = t°C) GATE TRIGGER CURRENT (Tj = 25°C) 102 7 5 3 2 DISTRIBUTION 0.9 TYPICAL EXAMPLE 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 –40 –20 0 20 40 60 80 100 120 TRANSIENT THERMAL IMPEDANCE (°C/W) GATE VOLTAGE (V) GATE CHARACTERISTICS 102 7 5 3 2 101 7 5 3 2 100 7 5 3 2 10–1 7 5 3 2 10–2 10–3 2 3 5 710–22 3 5 710–12 3 5 7 100 2 3 5 7 101 TIME (s) MAXIMUM AVERAGE POWER DISSIPATION (SINGLE-PHASE HALF WAVE) 32 ALLOWABLE CASE TEMPERATURE VS. AVERAGE ON-STATE CURRENT (SINGLE-PHASE HALF WAVE) 160 28 140 θ 120 360° 24 θ = 30° 60° 90° 120° 180° 20 16 12 θ 360° 8 4 0 0 2 4 6 8 RESISTIVE, INDUCTIVE LOADS 10 12 14 16 AVERAGE ON-STATE CURRENT (A) CASE TEMPERATURE (°C) AVERAGE POWER DISSIPATION (W) JUNCTION TEMPERATURE (°C) RESISTIVE, INDUCTIVE LOADS 100 80 60 90° θ = 30° 60° 120° 180° 40 20 0 0 2 4 6 8 10 12 14 16 AVERAGE ON-STATE CURRENT (A) Feb.1999 MITSUBISHI SEMICONDUCTOR 〈THYRISTOR〉 CR8PM MEDIUM POWER USE MAXIMUM AVERAGE POWER DISSIPATION (SINGLE-PHASE FULL WAVE) 32 ALLOWABLE CASE TEMPERATURE VS. AVERAGE ON-STATE CURRENT (SINGLE-PHASE FULL WAVE) 160 28 140 θ 120 360° 24 θ = 30° 60° 90° 120° 20 16 180° 12 8 θ 360° 4 0 θ 0 2 4 6 CASE TEMPERATURE (°C) AVERAGE POWER DISSIPATION (W) INSULATED TYPE, GLASS PASSIVATION TYPE RESISTIVE LOADS 8 10 12 14 16 RESISTIVE LOADS 100 80 60 θ = 30° 40 60° 120° 90° 180° 20 0 AVERAGE ON-STATE CURRENT (A) 0 2 4 6 8 10 12 14 16 AVERAGE ON-STATE CURRENT (A) MAXIMUM AVERAGE POWER DISSIPATION (RECTANGULAR WAVE) 32 ALLOWABLE CASE TEMPERATURE VS. AVERAGE ON-STATE CURRENT (RECTANGULAR WAVE) 160 28 θ 140 24 360° RESISTIVE, θ = 30° 60° 20 INDUCTIVE LOADS 16 90° 180° 120° 270° DC 12 8 4 0 0 2 4 6 8 10 12 14 CASE TEMPERATURE (°C) AVERAGE POWER DISSIPATION (W) θ 80 60 40 BREAKOVER VOLTAGE (T j = t°C) BREAKOVER VOLTAGE (T j = 25°C) 120 TYPICAL EXAMPLE 80 60 40 20 0 –40 –20 0 20 40 60 80 100 120 140 160 JUNCTION TEMPERATURE (°C) BREAKOVER VOLTAGE (dv/dt = vV/µs ) BREAKOVER VOLTAGE (dv/dt = 1V/µs ) 140 100 0 2 4 6 8 10 12 DC 14 16 AVERAGE ON-STATE CURRENT (A) 100 (%) 100 (%) 160 90° 180° 60° 120° 270° θ = 30° 20 AVERAGE ON-STATE CURRENT (A) BREAKOVER VOLTAGE VS. JUNCTION TEMPERATURE 360° RESISTIVE, INDUCTIVE LOADS 100 0 16 θ 120 BREAKOVER VOLTAGE VS. RATE OF RISE OF OFF-STATE VOLTAGE 160 Tj = 125°C TYPICAL 140 EXAMPLE 120 IGT (25°C) # 1 4.7mA 100 # 2 7.2mA 80 #2 60 40 #1 20 0 101 2 3 5 7 102 2 3 5 7 103 2 3 5 7 104 RATE OF RISE OF OFF-STATE VOLTAGE (V/µs) Feb.1999 MITSUBISHI SEMICONDUCTOR 〈THYRISTOR〉 CR8PM MEDIUM POWER USE INSULATED TYPE, GLASS PASSIVATION TYPE HOLDING CURRENT VS. GATE TRIGGER CURRENT 103 7 5 3 2 102 7 5 3 2 101 7 5 3 2 50 45 DISTRIBUTION ,,,,,,,,,,, ,,,,,,,,,,, ,,,,,,,,,,, ,,,,,,,,,,, ,,,,,,,,,,, ,,,,,,,,,,, TYPICAL EXAMPLE HOLDING CURRENT (mA) HOLDING CURRENT (mA) HOLDING CURRENT VS. JUNCTION TEMPERATURE ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, 15 10 0 0 2 4 6 8 10 12 14 16 18 20 TURN-OFF TIME VS. JUNCTION TEMPERATURE VD = 100V RL = 12Ω Ta = 25°C TYPICAL EXAMPLE IGT (25°C) # 5.2mA 4.0 3.5 3.0 2.5 # 1.5 ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, 80 TURN-OFF TIME (µs) TURN-ON TIME (µs) 20 TURN-ON TIME VS. GATE CURRENT 1.0 IT = 8A, –di/dt 70 = 5A/µs, VD = 300V dv/dt = 20V/µs 60 VR = 50V 50 40 30 TYPICAL EXAMPLE 20 DISTRIBUTION 10 0.5 0 0 10 20 30 40 50 60 70 80 90 100 0 20 40 60 80 100 120 140 160 JUNCTION TEMPERATURE (°C) REPETITIVE PEAK REVERSE VOLTAGE VS. JUNCTION TEMPERATURE 160 TYPICAL EXAMPLE 140 GATE TRIGGER CURRENT VS. GATE CURRENT PULSE WIDTH 120 100 (%) GATE CURRENT (mA) GATE TRIGGER CURRENT (tw) GATE TRIGGER CURRENT (DC) 100 (%) 25 GATE TRIGGER CURRENT (mA) 4.5 REPETITIVE PEAK REVERSE VOLTAGE (Tj = t°C) REPETITIVE PEAK REVERSE VOLTAGE (Tj = 25°C) 30 JUNCTION TEMPERATURE (°C) 5.0 0 35 5 100 –40 –20 0 20 40 60 80 100 120 140 160 2.0 40 100 80 60 40 20 0 –40 –20 0 20 40 60 80 100 120 140 160 JUNCTION TEMPERATURE (°C) 104 7 TYPICAL EXAMPLE 5 3 2 tw 0.1s 103 7 5 3 2 102 7 5 3 2 101 10–1 2 3 5 7 100 2 3 5 7 101 2 3 5 7 102 GATE CURRENT PULSE WIDTH (µs) Feb.1999