Order this document by MCR102/D SEMICONDUCTOR TECHNICAL DATA Reverse Blocking Triode Thyristors Annular PNPN devices designed for low cost, high volume consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. Supplied in an inexpensive plastic TO-226AA package which is readily adaptable for use in automatic insertion equipment. • • • • SCRs 0.8 AMPERES RMS 30 and 60 VOLTS Sensitive Gate Trigger Current — 200 µA Maximum Low Reverse and Forward Blocking Current — 100 µA Maximum, TC = 85°C Low Holding Current — 5 mA Maximum Passivated Surface for Reliability and Uniformity G A K KG A CASE 29-04 (TO-226AA) STYLE 10 MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Peak Repetitive Forward and Reverse Blocking Voltage(2) (TC = + 85°C, RGK = 1 kΩ) MCR102 MCR103 Forward Current RMS (See Figures 1 & 2) (All Conduction Angles) Peak Forward Surge Current, TA = 25°C (1/2 Cycle, Sine Wave, 60 Hz) Circuit Fusing Considerations (t = 8.3 ms) Peak Gate Power — Forward, TA = 25°C Symbol VDRM VRRM Value Unit Volts 30 60 IT(RMS) 0.8 Amps ITSM 10 Amps I2t 0.415 A2s PGM 0.1 Watt PGF(AV) 0.01 Watt Peak Gate Current — Forward, TA = 25°C (300 µs, 120 PPS) IGFM 1 Amp Peak Gate Voltage — Reverse VGRM 4 Volts TJ –40 to +85 °C Tstg –40 to +150 °C — + 230 °C Average Gate Power — Forward, TA = 25°C Operating Junction Temperature Range @ Rated VRRM and VDRM Storage Temperature Range Lead Solder Temperature ( 1/16I from case, 10 s max) t 1. Temperature reference point for all case temperature is center of flat portion of package. (TC = +85°C unless otherwise noted.) 2. VDRM and VRRM for all types can be applied on a continuous dc basis without incurring damage. Ratings apply for zero or negative gate voltage but positive gate voltage shall not be applied concurrently with a negative potential on the anode. When checking forward or reverse blocking capability, thyristor devices should not be tested with a constant current source in a manner that the voltage applied exceeds the rated blocking voltage. Motorola Thyristor Device Data Motorola, Inc. 1995 1 THERMAL CHARACTERISTICS Symbol Max Unit Thermal Resistance, Junction to Case Characteristic RθJC 75 °C/W Thermal Resistance, Junction to Ambient RθJA 200 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C, RGK = 1000 Ω unless otherwise specified.) Characteristic Symbol Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM) TC = 25°C TC = –65°C TC = 85°C Holding Current (Anode Voltage = 7 Vdc, initiating current = 20 mA) — 1.7 Volts IGT — 200 µA VGT VGD — — 0.1 0.8 1.2 — Volts IH — — 5 10 mA 90 α α = CONDUCTION ANGLE CASE MEASUREMENT POINT – CENTER OF FLAT PORTION dc 50 90° 120° 180° TA, MAXIMUM ALLOWABLE AMBIENT TEMPERATURE (° C) TC , MAXIMUM ALLOWABLE CASE TEMPERATURE ( °C) VTM FIGURE 2 – CURRENT DERATING (REFERENCE: AMBIENT TEMPERATURE) α = CONDUCTION ANGLE TYPICAL PRINTED CIRCUIT BOARD MOUNTING 70 α 50 120° 180° α = 30° 60° 90° 30 dc 10 10 0 0.1 0.2 0.3 0.4 IF(AV), AVERAGE FORWARD CURRENT (AMP) 2 µA µA p 1%. FIGURE 1 – CURRENT DERATING (REFERENCE: CASE TEMPERATURE) 60° 10 100 TC = 25°C TC = –65°C 1. Forward current applied for 1 ms maximum duration, duty cycle 2. RGK current is not included in measurement. α = 30° — — TC = 25°C Gate Trigger Voltage (Continuous dc) (Anode Voltage = 7 Vdc, RL = 100 Ohms) 30 Unit IDRM, IRRM Gate Trigger Current (Continuous dc)(2) (Anode Voltage = 7 Vdc, RL = 100 Ohms) 70 Max TC = 25°C TC = 85°C Forward “On” Voltage(1) (ITM = 1 A Peak @ TA = 25°C) 90 Min 0.5 0 0.1 0.2 0.3 IF(AV), AVERAGE FORWARD CURRENT (AMP) Motorola Thyristor Device Data 0.4 PACKAGE DIMENSIONS A B R STYLE 10: PIN 1. CATHODE 2. GATE 3. ANODE P L F SEATING PLANE K D X X G J H V C SECTION X–X 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. N N DIM A B C D F G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 ––– 0.250 ––– 0.080 0.105 ––– 0.100 0.115 ––– 0.135 ––– MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 ––– 6.35 ––– 2.04 2.66 ––– 2.54 2.93 ––– 3.43 ––– CASE 29-04 (TO–226AA) Motorola Thyristor Device Data 3 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. 4 ◊ Motorola Thyristor Device Data *MCR102/D* MCR102/D