Order this document by 2N6240/D SEMICONDUCTOR TECHNICAL DATA Reverse Blocking Triode Thyristors . . . PNPN devices designed for high volume consumer applications such as temperature, light, and speed control; process and remote control, and warning systems where reliability of operation is important. SCRs 4 AMPERES RMS 400 VOLTS • • • • Passivated Surface for Reliability and Uniformity Power Rated at Economical Prices Practical Level Triggering and Holding Characteristics Flat, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability • Recommended Electrical Replacement for C106 G K A A G A K CASE 77-08 (TO-225AA) STYLE 2 MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Symbol *Repetitive Peak Forward and Reverse Blocking Voltage(1) (1/2 Sine Wave) (RGK = 1000 ohms, TC = –40 to +110°C) VDRM or VRRM *Non–repetitive Peak Reverse Blocking Voltage (1/2 Sine Wave, RGK = 1000 ohms, TC = –40° to +110°C) VRSM *Average On–State Current (TC = –40 to + 90°C) (TC = +100°C) IT(AV) *Surge On–State Current (1/2 Sine Wave, 60 Hz, TC = +90°C) (1/2 Sine Wave, 1.5 ms, TC = +90°C) ITSM Circuit Fusing (t = 8.3 ms) *Peak Gate Power (Pulse Width = 10 µs, TC = 90°C) *Indicates JEDEC Registered Data. Value Unit Volts 400 Volts 450 Amps 2.6 1.6 Amps 25 35 I2t 2.6 A2s PGM 0.5 Watts (continued) 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Motorola Thyristor Device Data Motorola, Inc. 1999 1 2N6240 MAXIMUM RATINGS — continued (TJ = 25°C unless otherwise noted.) Rating Symbol Value Unit PG(AV) 0.1 Watt Peak Forward Gate Current IGM 0.2 Amp Peak Reverse Gate Voltage VRGM 6 Volts *Average Gate Power (t = 8.3 ms, TC = 90°C) *Operating Junction Temperature Range *Storage Temperature Range Mounting Torque(1) TJ –40 to +110 °C Tstg –40 to +150 °C 6 in. lb. THERMAL CHARACTERISTICS Characteristic Symbol Min Max Unit *Thermal Resistance, Junction to Case RθJC — 3 °C/W Thermal Resistance, Junction to Ambient RθJA — 75 °C/W *Indicates JEDEC Registered Data. ELECTRICAL CHARACTERISTICS (TC = 25°C and RGK = 1000 ohms unless otherwise noted.) Symbol Characteristic * Peak Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM) TC = 25°C TC = 110°C Min Typ Max Unit — — — — 10 200 µA µA — — 2.2 Volts — — — — 200 500 IDRM, IRRM *Peak Forward “On” Voltage (ITM = 8.2 A Peak, Pulse Width = 1 to 2 ms, 2% Duty Cycle) Gate Trigger Current (Continuous dc)(2) (VAK = 12 Vdc, RL = 24 Ohms) *(VAK = 12 Vdc, RL = 24 Ohms, TC = –40°C) VTM Gate Trigger Voltage (Continuous dc) (Source Voltage = 12 V, RS = 50 Ohms) *(VAK = 12 Vdc, RL = 24 Ohms, TC = –40°C) VGT — — 1 Volts Gate Non–Trigger Voltage (VAK = Rated VDRM, RL = 100 Ohms, TC = 110°C) VGD 0.2 — — Volts — — — — 5 10 tgt — 2 — µs dv/dt — 10 — V/µs Holding Current (VAK = 12 Vdc, IGT = 2 mA) *(Initiating On–State Current = 200 mA) *Total Turn–On Time (Source Voltage = 12 V, RS = 6 k Ohms) (ITM = 8.2 A, IGT = 2 mA, Rated VDRM) (Rise Time = 20 ns, Pulse Width = 10 µs) Forward Voltage Application Rate (VD = Rated VDRM, TC = 110°C) µA IGT IH TC = 25°C TC = –40°C mA *Indicates JEDEC Registered Data. 1. Torque rating applies with use of compression washer (B52200F006 or equivalent). Mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Anode lead and heatsink contact pad are common. (See AN–209 B) For soldering purposes (either terminal connection or device mounting), soldering temperatures shall not exceed +200°C. For optimum results an activated flux (oxide removing) is recommended. 2. Measurement does not include RGK current. 2 Motorola Thyristor Device Data FIGURE 2 – MAXIMUM AMBIENT TEMPERATURE FIGURE 1 – MAXIMUM CASE TEMPERATURE 110 110 TA, MAXIMUM ALLOWABLE AMBIENT TEMPERATURE ( °C) TC, MAXIMUM ALLOWABLE CASE TEMPERATURE ( °C) 2N6240 106 102 0 98 π α f = 60 Hz 94 90 α = 30° 60° 90° 120° 180° dc 86 90 0 70 f = 60 Hz 50 α = 30° 82 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 IT(AV), AVERAGE FORWARD CURRENT (AMP) Motorola Thyristor Device Data 3.6 4.0 π α 30 0 0.1 0.2 0.3 0.4 60° 90° 180° 0.5 0.6 dc 0.7 0.8 IT(AV), AVERAGE FORWARD CURRENT (AMP) 3 2N6240 PACKAGE DIMENSIONS –B– U F Q –A– NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C M STYLE 2: PIN 1. CATHODE 2. ANODE 3. GATE 1 2 3 H K J V G S R 0.25 (0.010) A M M B M D 2 PL 0.25 (0.010) M A M B DIM A B C D F G H J K M Q R S U V INCHES MIN MAX 0.425 0.435 0.295 0.305 0.095 0.105 0.020 0.026 0.115 0.130 0.094 BSC 0.050 0.095 0.015 0.025 0.575 0.655 5 _ TYP 0.148 0.158 0.045 0.055 0.025 0.035 0.145 0.155 0.040 ––– MILLIMETERS MIN MAX 10.80 11.04 7.50 7.74 2.42 2.66 0.51 0.66 2.93 3.30 2.39 BSC 1.27 2.41 0.39 0.63 14.61 16.63 5 _ TYP 3.76 4.01 1.15 1.39 0.64 0.88 3.69 3.93 1.02 ––– M CASE 77–08 (TO–225AA) Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 JAPAN: Motorola Japan Ltd.; SPD, Strategic Planning Office, 141, 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan. 81–3–5487–8488 Customer Focus Center: 1–800–521–6274 Mfax: [email protected] – TOUCHTONE 1–602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. – http://sps.motorola.com/mfax/ 852–26629298 HOME PAGE: http://motorola.com/sps/ 4 ◊ Motorola Thyristor Device Data 2N6240/D