ONSEMI BS170RL1

BS170
Preferred Device
Small Signal MOSFET
500 mA, 60 V
N−Channel TO−92 (TO−226)
Features
http://onsemi.com
• Pb−Free Package is Available*
500 mA, 60 V
RDS(on) = 5 MAXIMUM RATINGS
Rating
Symbol
Value
Unit
VDS
60
Vdc
VGS
VGSM
± 20
± 40
Vdc
Vpk
Drain Current (Note)
ID
0.5
Adc
Total Device Dissipation @ TA = 25°C
PD
350
mW
TJ, Tstg
−55 to
+150
°C
Drain −Source Voltage
Gate−Source Voltage
− Continuous
− Non−repetitive (tp ≤ 50 s)
Operating and Storage Junction
Temperature Range
N−Channel
D
G
S
1. The Power Dissipation of the package may result in a lower continuous drain
current.
TO−92 (TO−226)
CASE 29
STYLE 30
12
3
MARKING DIAGRAM
& PIN ASSIGNMENT
BS170
YWW
1
Drain
3
Source
2
Gate
Y
WW
= Year
= Work Week
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
*For additional information on our Pb−Free strategy
and soldering details, please download the
ON Semiconductor Soldering and Mounting
Techniques Reference Manual, SOLDERRM/D.
Preferred devices are recommended choices for future use
and best overall value.
 Semiconductor Components Industries, LLC, 2004
April, 2004 − Rev. 4
1
Publication Order Number:
BS170/D
BS170
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
IGSS
−
0.01
10
nAdc
V(BR)DSS
60
90
−
Vdc
Gate Threshold Voltage
(VDS = VGS, ID = 1.0 mAdc)
VGS(Th)
0.8
2.0
3.0
Vdc
Static Drain−Source On Resistance
(VGS = 10 Vdc, ID = 200 mAdc)
rDS(on)
−
1.8
5.0
ID(off)
−
−
0.5
A
gfs
−
200
−
mmhos
Ciss
−
−
60
pF
Turn−On Time
(ID = 0.2 Adc) See Figure 1
ton
−
4.0
10
ns
Turn−Off Time
(ID = 0.2 Adc) See Figure 1
toff
−
4.0
10
ns
OFF CHARACTERISTICS
Gate Reverse Current
(VGS = 15 Vdc, VDS = 0)
Drain−Source Breakdown Voltage
(VGS = 0, ID = 100 Adc)
ON CHARACTERISTICS (Note 1)
Drain Cutoff Current
(VDS = 25 Vdc, VGS = 0 Vdc)
Forward Transconductance
(VDS = 10 Vdc, ID = 250 mAdc)
SMALL−SIGNAL CHARACTERISTICS
Input Capacitance
(VDS = 10 Vdc, VGS = 0, f = 1.0 MHz)
SWITCHING CHARACTERISTICS
1. Pulse Test: Pulse Width 300 s, Duty Cycle 2.0%.
ORDERING INFORMATION
Package
Shipping†
BS170
TO−92 (TO−226)
1000 Unit / Box
BS170G
TO−92 (TO−226)
(Pb−Free)
1000 Unit / Box
Device
BS170RLRA
2000 Tape & Reel
BS170RLRM
2000 Tape & Ammo Box
BS170RLRP
TO−92 ((TO−226))
2000 Tape & Ammo Box
BS170RL1
2000 Tape & Reel
BS170ZL1
2000 Tape & Ammo Box
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
2
BS170
RESISTIVE SWITCHING
+25 V
ton
Vin
PULSE GENERATOR
50 125 40 pF
50 TO SAMPLING SCOPE
50 INPUT
Vout
20 dB
50 ATTENUATOR
toff
90%
10%
OUTPUT
V
INVERTED out
1.0 M
90%
50%
10%
INPUT
Vin
(Vin Amplitude 10 Volts)
Figure 2. Switching Waveforms
Figure 1. Switching Test Circuit
2.0
2.0
VDS = VGS
ID = 1.0 mA
1.6
I D(on) , DRAIN CURRENT (AMPS)
VGS(th), THRESHOLD VOLTAGE
PULSE
WIDTH
1.2
0.8
0.4
VGS = 10 V
1.6
9.0 V
8.0 V
1.2
7.0 V
6.0 V
0.8
5.0 V
0.4
4.0 V
0
50
100
0
50
TJ, JUNCTION TEMPERATURE (°C)
150
0
Figure 3. VGS(th) Normalized versus Temperature
100
VGS = 10 V
9.0 V
1.6
VGS = 0 V
80
8.0 V
1.2
7.0 V
0.8
6.0 V
0.4
60
40
Ciss
20
5.0 V
Coss
4.0 V
0
20
10
30
VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
4.0
Figure 4. On−Region Characteristics
C, CAPACITANCE (pF)
I D(on) , DRAIN CURRENT (AMPS)
2.0
1.0
2.0
3.0
VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
Crss
40
0
Figure 5. Output Characteristics
10
20
30
40
50
60
VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
Figure 6. Capacitance versus
Drain−To−Source Voltage
http://onsemi.com
3
BS170
PACKAGE DIMENSIONS
TO−92 (TO−226)
CASE 29−11
ISSUE AL
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
B
R
P
L
SEATING
PLANE
K
D
X X
G
J
H
V
C
SECTION X−X
1
N
N
DIM
A
B
C
D
G
H
J
K
L
N
P
R
V
INCHES
MIN
MAX
0.175
0.205
0.170
0.210
0.125
0.165
0.016
0.021
0.045
0.055
0.095
0.105
0.015
0.020
0.500
−−−
0.250
−−−
0.080
0.105
−−−
0.100
0.115
−−−
0.135
−−−
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.407
0.533
1.15
1.39
2.42
2.66
0.39
0.50
12.70
−−−
6.35
−−−
2.04
2.66
−−−
2.54
2.93
−−−
3.43
−−−
STYLE 30:
PIN 1. DRAIN
2. GATE
3. SOURCE
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
4
For additional information, please contact your
local Sales Representative.
BS170/D