Ordering number : ENN694F 2SB815 / 2SD1048 PNP / NPN Epitaxial Planar Silicon Transistors 2SB815 / 2SD1048 General-Purpose AF Amplifier Applications Features • • Package Dimensions Ultrasmall package allows miniaturization in end products. Large current capacity (IC=0.7A) and low-saturation voltage. unit : mm 2018B [2SB815 / 2SD1048] 0.5 0.4 0.16 0 to 0.1 1 : Base 2 : Emitter 3 : Collector 0.8 1.1 1 0.95 0.95 2 1.9 2.9 0.5 1.5 2.5 3 Specifications SANYO : CP ( ) : 2SB815 Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Conditions Ratings (--)20 (--)15 (--)5 (--)0.7 (--)1.5 200 125 --55 to +125 Unit V V V A A mW °C °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Emitter Cutoff Current ICBO IEBO hFE1 hFE2 DC Current Gain Ratings Conditions min VCB=(--)15V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(--)50mA VCE=(--)2V, IC=(--)500mA typ max (--)0.1 (--)0.1 (600*)900* (200*)200* 80 Unit µA µA Continued on next page. * : The 2SB815, 2SD1048 are classified by 50mA hFE as follows : 2SB815 200 B6 400 300 B7 600 2SD1048 200 X6 400 300 X7 600 450 X8 900 Note : Marking : B (2SB815), X (2SD1048) hFE rank : 6, 7 (2SB815), 6, 7, 8 (2SD1048) Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company http://semicon.sanyo.com/en/network TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 41301 TS IM / 91098 HA (KT) / 8258MO / 4017 KI / 2173 KI, TS No.694-1/3 2SB815 / 2SD1048 Continued from preceding page. Symbol fT Cob VCE(sat)1 VCE(sat)2 Collector-to-Emitter Saturation Voltage 0mA --500 --1 --6mA --400 --300 --2mA --1mA --200 --100 0 --0.1 --0.2 --0.3 --0.4 Collector-to-Emitter Voltage, VCE -- V 600 A 6m 4mA 500 2mA 400 300 1mA 200 0 0.4 0.6 0.8 1.0 5 100 7 5 3 2 (For PNP, minus sign is omitted.) 10 1.0 2 3 5 10 2 3 5 100 815 2SB 2 1048 2SD 100 7 5 3 2 (For PNP, minus sign is omitted.) 2 3 5 7 2 10 3 5 7 100 ITR08399 Cob -- VCB 5 f=1MHz Output Capacitance, Cob -- pF 2SB815 2 3 3 2SD1048 3 5 Collector Current, IC -- mA VCE=2V 7 VCE=10V ITR08398 hFE -- IC 1000 0.5 ITR08397 f T -- IC 10 1.0 0 Base-to-Emitter Voltage, VBE -- V 0.4 Collector-to-Emitter Voltage, VCE -- V Gain-Bandwidth Product, f T -- MHz 2SD1048 2SB815 20 0.2 0.3 7 40 0 0.2 1000 80 60 0.1 ITR08396 VCE=5V (For PNP, minus sign is omitted.) IB=0 0 --0.5 IB -- VBE 100 Base Current, IB -- µA (--35)25 (--120)80 100 IB=0 0 DC Current Gain, hFE 50m A Collector Current, IC -- mA A 0m mA 0 --3 MHz pF mV mV 2SD1048 700 --5 Collector Current, IC -- mA --700 Unit max IC -- VCE 800 2SB815 --600 typ 250 (13)8 (--15)10 (--60)30 VCE=(--)10V, IC=(--)50mA VCB=(--)10V, f=1MHz IC=(--)5mA, IB=(--)0.5mA IC=(--)100mA, IB=(--)10mA IC -- VCE --800 min mA Gain-Bandwidth Product Output Capacitance Ratings Conditions 10 Parameter 2SB 2 815 2SD 10 1048 7 5 3 2 (For PNP, minus sign is omitted.) 1.0 2 3 5 Collector Current, IC -- mA 1000 2 3 5 ITR08400 5 7 1.0 2 3 5 7 10 2 Collector-to-Base Voltage, VCB -- V 3 5 ITR08401 No.694-2/3 2SB815 / 2SD1048 VCE(sat) -- IC PC -- Ta 300 IC / IB=10 5 Collector Dissipation, PC -- mW Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 10000 3 2 1000 5 3 2 100 815 2SB 5 3 2 8 104 2SD 250 200 150 100 50 10 5 1.0 (For PNP, minus sign is omitted.) 2 3 5 10 2 3 5 100 Collector Current, IC -- mA 2 3 5 1000 ITR08402 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 ITR08403 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 2001. Specifications and information herein are subject to change without notice. PS No.694-3/3