W005G thru W10G Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier FEATURES • UL recognition, file number E54214 • Ideal for printed circuit boards e4 • Typical IR less than 0.1 µA ~ + • High case dielectric strength ~ ~ + − • High surge current capability ~ − • Solder dip 260 °C, 40 s Case Style WOG • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for power supply, adapter, charger, lighting ballaster on consumers and home appliances applications. PRIMARY CHARACTERISTICS IF(AV) 1.5 A VRRM 50 V to 1000 V IFSM 50 A IR 5 µA VF 1.0 V TJ max. 150 °C MECHANICAL DATA Case: WOG Epoxy meets UL 94V-0 flammability rating Terminals: Silver plated leads, solderable per J-STD-002 and JESD22-B102 E4 suffix for consumer grade Polarity: As marked on body MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL W005G W01G W02G W04G W06G W08G W10G UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current at 0.375" (9.5 mm) lead length at TA = 25 °C IF(AV) 1.5 A Peak forward surge current single sine-wave superimposed on rated load IFSM 50 A I2t 10 A2s TJ, TSTG - 55 to + 150 °C Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range Document Number: 88769 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 W005G thru W10G Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) TEST CONDITIONS PARAMETER SYMBOL W005G W01G W02G W04G W06G W08G W10G UNIT Maximum instantaneous forward voltage drop per diode 1.0 A VF 1.0 V Maximum DC reverse current at rated DC blocking voltage per diode TA = 25 °C TA = 125 °C IR 5.0 500 µA Typical junction capacitance per diode 4.0 V, 1 MHz CJ 14 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL W005G W01G W02G RθJA RθJL Typical thermal resistance (1) W04G W06G W08G W10G 36 11 UNIT °C/W Note: (1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length P.C.B. mounting. P.C.B. size 0.22 x 0.22" (5.5 x 5.5 mm) ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 1.12 51 100 Plastic bag W06G-E4/51 RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 60 60 Hz Resistive or Inductive Load 1.4 1.2 P.C.B. 0.375" (9.5 mm) 1.0 Copper Pads 0.22 x 0.22" (5.5 x 5.5 mm) 0.8 0.6 Capacitive Load 0.4 5.0 I(pk) = 10 I(AV) 20 0.2 Peak Forward Surge Current (A) Average Forward Output Current (A) 1.6 TA = 25 °C Single Sine-Wave 50 40 30 20 10 1.0 Cycle 0 0 20 40 60 80 100 120 140 150 Ambient Temperature (°C) Figure 1. Derating Curve Output Rectified Current www.vishay.com 2 1 10 100 Number of Cycles at 60 Hz Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88769 Revision: 15-Apr-08 W005G thru W10G Vishay General Semiconductor 100 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 1 0.1 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 0.01 0.4 0.6 1.0 0.8 1.2 1.4 10 1 0.1 1.6 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 100 Transient Thermal Impedance (°C/W) 100 Instantaneous Reverse Current (µA) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0 20 40 60 80 10 1 0.1 0.01 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Heating Time (s) Figure 4. Typical Reverse Leakage Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style WOG 0.388 (9.86) 0.348 (8.84) 0.220 (5.6) 0.160 (4.1) 1.0 (25.4) MIN. 0.032 (0.81) 0.028 (0.71) 0.348 (8.84) 0.308 (7.82) 0.060 (1.52) 0.020 (0.51) 0.220 (5.6) 0.180 (4.6) 0.220 (5.6) 0.180 (4.6) Document Number: 88769 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000