Ordering number : ENN7385 CPH6517 NPN Epitaxial Planar Silicon Composite Transistor CPH6517 Low-Frequency General-Purpose Amplifier Applications • unit : mm 2212 [CPH6517] B2 5 0.05 1 E2 2 3 0.95 0.7 0.9 TR2 TR1 0.4 (Top view) B1 E1 0.2 4 0.6 6 Electrical Connection C1 0.15 2.9 2.8 • Composite type with 2 transistors contained in the CPH package currently in use, improving the mounting efficiency greatly. The CPH6517 is formed with two chips, being equivalent to the 2SC4555, placed in one package. Low collector to emitter saturation voltage. Excellent in thermal equilibrium and pair capability. 0.6 • Package Dimensions 0.2 • 1.6 Features C2 1 : Base 1 2 : Emitter 1 3 : Collector 2 4 : Emitter 2 5 : Base 2 6 : Collector 1 SANYO : CPH6 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 20 V Collector-to-Emitter Voltage VCEO 15 V Emitter-to-Base Voltage VEBO 5 Collector Current IC 500 Collector Current(Pulse) ICP 1 Base Current 100 Collector Dissipation IB PC Total Dissipation PT Junction Temperature Tj Storage Temperature Tstg 1unit V mA A mA 350 mW 500 mW 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO Emitter Cutoff Current IEBO Conditions Ratings min typ max VCB=15V, IE=0 VEB=4V, IC=0 Unit 0.1 µA 0.1 µA Continued on next page. Note : The specifications shown above are for each individual transistor. Marking : 3B Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 22503 TS IM TA-100272 No.7385-1/3 CPH6517 Continued from preceding page. Parameter Symbol hFE1 hFE2 DC Current Gain hFE(Small / Large) Gain-Bandwidth Product fT Cob Output Capacitance VBE(sat) Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO 160 VCE=2V, IC=400mA 80 VCE=2V, IC=10mA 0.8 IC=200mA, IB=10mA IC=10µA, IE=0 IC=1mA, RBE=∞ IE=10µA, IC=0 Collector Current, IC -- mA 0.5mA 120 0.4mA 0.3mA 80 0.2mA 0.1mA 40 pF 15 30 mV 160 300 mV 0.95 1.2 V 20 V 15 V 5 V VCE=2V 1.2 400 300 200 100 IB=0 0 0 1.6 2.0 Collector-to-Emitter Voltage, VCE -- V 0 0.2 0.4 0.6 0.8 1.0 1.2 Base-to-Emitter Voltage, VBE -- V ITR10442 hFE -- IC 1000 MHz 500 0.6mA 0.8 0.98 IC -- VBE 600 160 0.4 560 4 A 0.9mA 0.8mA 0m 1. 0.7mA 0 Gain-Bandwidth Product, f T -- MHz 7 DC Current Gain, hFE 5 Ta=75°C 25°C --25°C 2 100 7 5 3 VCE=2V 1000 7 5 3 2 100 7 2 1.0 5 2 3 5 7 10 2 3 5 7 100 2 Collector Current, IC -- mA 3 5 7 5 7 2 10 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 10 7 5 3 2 5 7 100 2 3 5 ITR10445 VCE(sat) -- IC 5 f=1MHz 3 3 Collector Current, IC -- mA ITR10444 Cob -- VCB 5 Output Capacitance, Cob -- pF 1.4 ITR10443 f T -- IC 2 VCE=2V 3 Unit max 300 IC -- VCE 200 Collector Current, IC -- mA VCE=2V, IC=10mA IC=5mA, IB=0.5mA IC=200mA, IB=10mA VCE(sat)2 Base-to-Emitter Saturation Voltage typ VCE=2V, IC=50mA VCB=10V, f=1MHz VCE(sat)1 Collector-to-Emitter Saturation Voltage min Ta=7 5 °C 25°C --25° C DC Current Gain Ratio Ratings Conditions IC / IB=20 3 2 1000 7 5 3 2 100 25° C 7 5 5°C Ta=7 --25°C 3 2 10 1.0 5 7 1.0 2 3 5 7 10 Collector-to-Base Voltage, VCB -- V 2 3 ITR10446 5 7 1.0 2 3 5 7 10 2 3 5 7 100 Collector Current, IC -- mA 2 3 5 7 ITR10447 No.7385-2/3 CPH6517 VBE(sat) -- IC 10 1.0 Collector Current, IC -- A on Ta = 25 °C 0.1 7 5 3 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 Collector Current, IC -- mA 2 3 5 7 ITR10448 PC -- Ta 600 Collector Dissipation, PC -- mW ati s 75°C 5 s Ta= --25°C 7 op er 2 0m 25°C DC 3 ms 2 IC=0.5A 10 3 5 100µs 1m 7 5 ICP=1A 10 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 7 1.0 ASO 2 IC / IB=20 0.01 0.1 2 3 5 7 1.0 2 3 5 7 10 Collector-to-Emitter Voltage, VCE -- V 2 3 IT05367 500 400 to 350 ta 300 ld 200 ip at io 1u n nit iss 100 0 0 25 50 75 100 125 Ambient Temperature, Ta -- °C 150 175 IT05368 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2003. Specifications and information herein are subject to change without notice. PS No.7385-3/3