CPH3121 / CPH3221 Ordering number : ENN7219A CPH3121 / CPH3221 PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Applications • Relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. Specifications ( ) : CPH3121 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (--)15 V Collector-to-Emitter Voltage VCEO (--12)15 V Emitter-to-Base Voltage VEBO (--)5 V IC (--)3 A Collector Current Collector Current (Pulse) Base Current ICP IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg (--)5 (--)600 Mounted on a ceramic board (600mm2✕0.8mm) A mA 0.9 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Conditions Ratings min typ max VCB=(--)12V, IE=0 VEB=(--)4V, IC=0 Gain-Bandwidth Product hFE fT VCE=(--)2V, IC=(--)500mA VCE=(--)2V, IC=(--)500mA Output Capacitance Cob VCB=(--)10V, f=1MHz 200 Unit (--)0.1 µA (--)0.1 µA 560 (380)350 Marking : CPH3121 : AS, CPH3221 : CS (40)23 MHz pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1504 TS IM TB-00000309 / 80902 TS IM TA-100097, 3618 No.7219-1/5 CPH3121 / CPH3221 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage VCE(sat) Base-to-Emitter Saturation Voltage VBE(sat) Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Turn-ON Time Storage Time ton tstg tf Fall Time Ratings Conditions min typ IC=(--)1.5A, IB=(--)30mA IC=(--)1.5A, IB=(--)30mA Unit max (--110)115 (--165)175 (--)0.85 IC=(--)10µA, IE=0 IC=(--)1mA, RBE=∞ mV (--)1.2 V (--)15 V (--12)15 V IE=(--)10µA, IC=0 See specified Test Circuit. (--)5 V (30)30 ns See specified Test Circuit. (90)210 ns See specified Test Circuit. (14)11 ns Package Dimensions Switching Time Test Circuit unit : mm 2150A 2.9 0.6 0.4 3 IB1 PW=20µs D.C.≤1% 0.2 0.15 OUTPUT IB2 INPUT RL 2.8 1.6 RB=1kΩ VR 0.05 50Ω + 470µF + 220µF 0.6 2 1 1.9 0.7 0.9 0.2 1 : Base 2 : Emitter 3 : Collector VBE= --5V VCC=5V IC=20IB1= --20IB2=1.5A For PNP, the polarity is reversed. SANYO : CPH3 IC -- VCE 0.6mA -- --0.5mA --0.4mA --140 --120 --0.3mA --100 --80 --0.2mA --60 --0.1mA --40 20mA 4.0 15mA 3.5 3.0 10mA 2.5 2.0 5mA 1.5 1.0 --20 2mA 1mA 0.5 IB=0 CPH3121 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 --4.0 Collector-to-Emitter Voltage, VCE -- V 0 CPH3121 --14m A --1.6 --6mA --1.0 --4mA --0.8 --0.6 --2mA IB=0 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector-to-Emitter Voltage, VCE -- V --0.9 --1.0 IT04584 4.0 4.5 5.0 IT04583 CPH3221 25mA A 40m 20mA 15mA 10mA 2.5 2.0 1.5 0.5 --0.2 3.5 3.0 1.0 --0.1 3.0 3.5 --0.2 0 2.5 4.0 --0.4 0 2.0 IC -- VCE 4.5 --8mA --16m --1.2 1.5 5.0 --10mA A --1.4 1.0 Collector-to-Emitter Voltage, VCE -- V Collector Current, IC -- A --1.8 A --12m 0.5 IT04582 IC -- VCE --2.0 IB=0 0 --4.5 --5.0 mA 0 Collector Current, IC -- A CPH3221 A 25m 60 Collector Current, IC -- mA A --0.8m --160 4.5 Collector Current, IC -- A --180 IC -- VCE 5.0 A A --0.7m 40m --200 5mA IB=0 2mA 1mA 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Collector-to-Emitter Voltage, VCE -- V 1.0 IT04585 No.7219-2/5 CPH3121 / CPH3221 IC -- VBE --3.0 --1.0 1.5 25°C --25°C --1.5 2.0 Ta=75 °C Collector Current, IC -- A --2.0 --0.5 1.0 0.5 0 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V --1.2 0 0.6 0.8 1.0 CPH3221 VCE=2V 7 DC Current Gain, hFE 5 Ta=75°C 25°C 3 --25°C 2 2 100 7 7 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 0.01 5 7 --10 IT04588 Collector Current, IC -- A Gain-Bandwidth Product, f T -- MHz 7 5 3 2 100 7 5 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 5 7 0.1 2 3 5 7 1.0 2 3 2 100 7 5 2 3 5 7 0.1 2 3 5 7 1.0 Output Capacitance, Cob -- pF Output Capacitance, Cob -- pF 2 Collector Current, IC -- A 3 5 IT04591 Cob -- VCB 100 3 7 10 IT04589 5 CPH3221 f=1MHz CPH3121 f=1MHz 5 5 CPH3221 VCE=2V IT04590 7 3 f T -- IC 7 3 0.01 5 Cob -- VCB 100 3 1000 CPH3121 VCE= --2V 2 2 Collector Current, IC -- A f T -- IC 1000 Ta=75°C 25°C --25°C 3 100 2 --1.0 1.2 IT04587 hFE -- IC 1000 5 3 --0.01 0.4 Base-to-Emitter Voltage, VBE -- V CPH3121 VCE= --2V 7 5 --0.01 0.2 IT04586 hFE -- IC 1000 DC Current Gain, hFE CPH3221 VCE=2V 2.5 Ta=75 °C 25°C --25°C Collector Current, IC -- A --2.5 Gain-Bandwidth Product, f T -- MHz IC -- VBE 3.0 CPH3121 VCE= --2V 7 5 3 2 10 2 3 5 7 --10 Collector-to-Base Voltage, VCB -- V 2 3 IT04592 1.0 2 3 5 7 10 2 3 5 Collector-to-Base Voltage, VCB -- V 7 100 IT04593 No.7219-3/5 CPH3121 / CPH3221 5 --100 7 °C 75 5 = Ta 3 °C 25 C 5° --2 2 --10 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 --100 C 5° C 5° =7 Ta °C 5 --2 5 2 3 2 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 2 25°C --1.0 Ta= --25°C 7 75°C 5 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A s DC --1.0 7 5 10 10 m 0m s op era s tio n 3 2 --0.1 7 5 3 2 CPH3121 Ta=25°C Single pulse Mounted on a ceramic board (600mm2✕0.8mm) --0.01 --0.1 2 3 5 7 --1.0 2 3 5 Collector-to-Emitter Voltage, VCE 7 --10 2 -- V IT04600 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT04595 3 3 5 7 10 IT04597 VCE(sat) -- IC CPH3221 IC / IB=50 2 100 7 5 25 °C 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 VBE(sat) -- IC CPH3221 IC / IB=50 2 25°C 1.0 Ta= --25°C 7 75°C 5 3 2 0.01 5 7 --10 IT04598 <100µs 50 0µ s 1m 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT04599 Collector Current, IC -- A 10 7 5 3 2 ASO ICP=5A IC=3A <100µs 1m s DC 1.0 7 5 s 0µ 3 2 10 3 ASO ICP= --5A IC= --3A 2 50 Collector Current, IC -- A --10 7 5 °C 25 3 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V Base-to-Emitter Saturation Voltage, VBE(sat) -- V CPH3121 IC / IB=50 °C 75 = Ta C 5° --2 5 10 0.01 5 7 --10 IT04596 VBE(sat) -- IC 3 7 5 CPH3121 IC / IB=50 7 100 Collector Current, IC -- A Collector Current, IC -- A Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 2 7 5 0.01 5 7 --10 IT04594 VCE(sat) -- IC 5 3 Ta 5° =75 C °C 2 VCE(sat) -- IC CPH3221 IC / IB=20 --2 3 VCE(sat) -- IC CPH3121 IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 10 10 m 0m s op era s tio n 3 2 0.1 7 5 3 2 CPH3221 Ta=25°C Single pulse Mounted on a ceramic board (600mm2✕0.8mm) 0.01 0.1 2 3 5 7 1.0 2 3 5 7 Collector-to-Emitter Voltage, VCE -- V 2 10 IT04601 No.7219-4/5 CPH3121 / CPH3221 PC -- Ta 1.0 CPH3121 / CPH3221 Collector Dissipation, PC -- W 0.9 M ou 0.8 nt 0.7 ed on ac er 0.6 am ic 0.5 bo ar d (6 00 0.4 m 0.3 m2 ✕ 0. 8m 0.2 m ) 0.1 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT04602 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2004. Specifications and information herein are subject to change without notice. PS No.7219-5/5