Ordering number : ENN7128 MCH3105 / MCH3205 PNP / NPN Silicon Epitaxial Planar Transistors MCH3105 / MCH3205 High-Current Switching Applications Applications • Package Dimensions DC / DC converters, relay drivers, lamp drivers, motor unit : mm drivers, strobes. 2194A [MCH3105 / MCH3205] • 2 1 0.65 0.07 • 2.0 3 Specifications ( ) : MCH3105 2 : Emitter 3 : Collector 1 Symbol 2 SANYO : MCPH3 (Top view) Absolute Maximum Ratings at Ta=25°C Parameter 1 : Base (Bottom view) 0.85 • 1.6 • 0.15 3 0.25 • Adoption of FBET, MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultraminiature package facilitates miniaturization in end products (mounting height : 0.85mm). High allowable power dissipation. 2.1 • 0.3 0.25 Features Conditions Ratings Unit Collector-to-Base Voltage VCBO (--50)80 V Collector-to-Emitter Voltage VCES (--50)80 V Collector-to-Emitter Voltage VCEO (--)50 V Emitter-to-Base Voltage VEBO (--)6 V (--)3 A Base Current IC ICP IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Collector Current Collector Current (Pulse) (--)6 (--)600 Mounted on a ceramic board(600mm2✕0.8mm) A mA 0.8 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product hFE fT Output Capacitance Cob Conditions VCB=(--)40V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(--)100mA VCE=(--)10V, IC=(--)500mA VCB=(--)10V, f=1MHz Ratings min typ max 200 Unit (--)1 µA (--)1 µA 560 (360)380 MHz (24)13 Marking : MCH3105 : AE / MCH3205 : CE pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 13002 TS IM TA-3557 No.7128-1/5 MCH3105 / MCH3205 Continued from preceding page. Parameter Symbol Ratings Conditions VCE(sat)1 min typ IC=(--)1A, IB=(--)50mA Collector-to-Emitter Saturation Voltage VCE(sat)2 IC=(--)2A, IB=(--)100mA VBE(sat) Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage V(BR)CBO IC=(--)2A, IB=(--)100mA IC=(--)10µA, IE=0 Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage V(BR)CES V(BR)CEO IC=(--)100µA, RBE=0 IC=(--)1mA, RBE=∞ Emitter-to-Base Breakdown Voltage V(BR)EBO IE=(--)10µA, IC=0 See specified Test Circuit. Turn-ON Time ton tstg Storage Time Fall Time tf Unit max (--100) (--200) 80 120 mV mV (--185) (--500) mV 140 210 mV (--)0.88 (--)1.2 V (--50)80 V (--50)80 V (--)50 V (--)6 V (30)35 ns See specified Test Circuit. (230)300 ns See specified Test Circuit. (15)22 ns Switching Time Test Circuit IB1 PW=20µs D.C.≤1% INPUT OUTPUT IB2 VR RB RL 50Ω + 100µF + 470µF VBE= --5V VCC=25V IC=10IB1= --10IB2=1A (For PNP, the polarity is reversed.) IC -- VCE MCH3105 mA Collector Current, IC -- A 0 --4 5.0 A 0m --3 mA --20 A --1.6 --10m A --8m --6mA --1.2 IC -- VCE MCH3205 --4mA --0.8 --2mA --0.4 80mA A 100m 4.5 Collector Current, IC -- A --2.0 4.0 60mA 3.5 40mA 3.0 2.5 20mA 2.0 10mA 1.5 5mA 1.0 0.5 IB=0 0 0 --0.2 --0.4 --0.6 --0.8 Collector-to-Emitter Voltage, VCE -- V 0 3.0 MCH3105 VCE= --2V 2.5 0.8 1.2 1.6 2.0 IT03964 IC -- VBE MCH3205 VCE=2V 1.5 C 25°C --25°C 1.0 2.0 Ta=75° 1.5 --25°C C 25°C 2.0 Collector Current, IC -- A 2.5 Ta=75° Collector Current, IC -- A 0.4 Collector-to-Emitter Voltage, VCE -- V IT03963 IC -- VBE 3.0 IB=0 0 --1.0 1.0 0.5 0.5 0 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Base-to-Emitter Voltage, VBE -- V 0.9 1.0 IT03965 0 0.2 0.4 0.6 0.8 Base-to-Emitter Voltage, VBE -- V 1.0 IT03966 No.7128-2/5 MCH3105 / MCH3205 hFE -- IC 1000 7 25°C 100 7 5 2 7 5 3 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 100 7 5 3 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 3 5 7 2 0.1 3 5 7 MCH3205 VCE=10V 5 3 2 100 7 5 3 2 0.01 2 3 5 7 0.1 2 3 5 7 1.0 5 MCH3205 f=1MHz 7 5 Output Capacitance, Cob -- pF 2 3 IT03970 Cob -- VCB 100 MCH3105 f=1MHz 3 2 Collector Current, IC -- A IT03969 5 3 IT03968 f T -- IC 7 5 7 2 1.0 Collector Current, IC -- A Cob -- VCB 100 3 1000 5 2 2 IT03967 MCH3105 VCE= --10V 7 2 --0.01 10 0.01 3 f T -- IC 1000 --25°C 25°C 2 2 Ta=75°C 100 3 Collector Current, IC -- A Gain-Bandwidth Product, f T -- MHz 3 DC Current Gain, hFE --25°C 2 10 --0.01 Output Capacitance, Cob -- pF 5 Ta=75°C 3 MCH3205 VCE=2V 7 Gain-Bandwidth Product, f T -- MHz DC Current Gain, hFE 5 hFE -- IC 1000 MCH3105 VCE= --2V 3 2 10 7 5 3 2 3 5 7 --10 2 3 5 Collector-to-Base Voltage, VCB -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV MCH3105 IC / IB=20 3 2 --1000 7 5 3 2 --100 7 5 C 75° Ta= C 25° °C --25 3 2 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 3 2 5 7 --10 IT03973 3 5 7 1.0 2 3 5 7 10 2 3 Collector-to-Base Voltage, VCB -- V IT03971 VCE(sat) -- IC --10000 7 5 2 0.1 7 5 7 IT03972 VCE(sat) -- IC 1000 MCH3205 IC / IB=20 7 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 10 --1.0 5 3 2 100 7 5 5°C 3 7 Ta= 2 25 --25° C 10 0.01 2 3 5 7 0.1 2 3 °C 5 7 1.0 Collector Current, IC -- A 2 3 5 IT03974 No.7128-3/5 MCH3105 / MCH3205 VCE(sat) -- IC MCH3105 IC / IB=50 --1000 7 5 3 2 °C =75 Ta °C 25°C --25 3 2 --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Ta= --25°C 75°C 5 25°C 3 2 --100 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 10 7 5 ASO 0µ 50 0m s 3 2 s s op era 3 2 0.1 7 5 s m 10 s 0µ 1m 10 DC tio n MCH3105 / MCH3205 Ta=25°C Single pulse Mounted on a ceramic board (600mm2✕0.8mm) 0.01 0.1 2 3 5 7 1.0 2 3 C 75° Ta= C --25° 5 3 5 7 10 2 Collector-to-Emitter Voltage, VCE -- V °C 25 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 IT03976 VBE(sat) -- IC MCH3205 IC / IB=50 3 2 1000 Ta= --25°C 7 75°C 5 25°C 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 IT03978 PC -- Ta 1.0 IC=3A 1.0 7 5 7 Collector Current, IC -- A ICP=6A 10 3 2 100 100 0.01 5 7 --10 IT03977 Collector Current, IC -- A Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 2 Collector Dissipation, PC -- W Base-to-Emitter Saturation Voltage, VBE(sat) -- mV 3 7 2 5 MCH3105 IC / IB=50 --1000 3 Collector Current, IC -- A VBE(sat) -- IC 5 5 10 0.01 5 7 --10 IT03975 Collector Current, IC -- A MCH3205 IC / IB=50 7 3 2 --100 7 5 VCE(sat) -- IC 1000 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV --10000 7 5 0.8 M ou nt 0.6 ed on ac er am ic bo ar 0.4 d( 60 0m m2 ✕0 0.2 .8m m ) 0 3 5 7 IT03980 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT03981 No.7128-4/5 MCH3105 / MCH3205 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2002. Specifications and information herein are subject to change without notice. PS No.7128-5/5