CPH6071 Ordering number : ENN7710 NPN / PNP Epitaxial Planar Silicon Transistors CPH6071 Video Output Driver,High-Frequency Amplifier Applications Features • • Composite type with NPN transistor and PNP transistor contained in the conventional CPH package improving the mounting efficiency greatly. The CPH6071 is formed with two chips, being equivalent to the 2SC4504 and the other the 2SA1724, placed in one package. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit [TR1(NPN Tr)] Collector-to-Base Voltage VCBO 30 V Collector-to-Emitter Voltage VCEO 20 V Emitter-to-Base Voltage VEBO 3 Collector Current IC Collector Current (Pulse) Collector Dissipation [TR2(PNP Tr)] ICP PC Mounted on a ceramic board (600mm2✕0.8mm) V 300 mA 600 mA 0.9 W Collector-to-Base Voltage VCBO --30 V Collector-to-Emitter Voltage VCEO --20 V Emitter-to-Base Voltage VEBO --3 Collector Current IC Collector Current (Pulse) ICP PC Mounted on a ceramic board (600mm2✕0.8mm) Total Dissipation PT Mounted on a ceramic board (600mm2✕0.8mm) Junction Temperature Tj Storage Temperature Tstg Collector Dissipation V --300 mA --600 mA 0.9 W [Common Ratings] 1.1 W 150 °C --55 to +150 °C Marking : GH Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1004 TS IM TB-00000886 No.7710-1/5 CPH6071 Electrical Characteristics at Ta=25°C Parameter Symbol Ratings Conditions min typ Unit max [TR1(NPN Tr)] Collector Cutoff Current ICBO VCB=20V, IE=0 0.1 µA Emitter Cutoff Current IEBO hFE(1) VEB=2V, IC=0 5.0 µA DC Current Gain VCE=5V, IC=50mA VCE=5V, IC=300mA hFE(2) fT Gain-Bandwidth Product Output Capacitance 200 20 VCE=5V, IC=50mA VCB=10V, f=1MHz Cob Reverse Transfer Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage [TR2(PNP Tr)] 100 Cre VCE(sat) VBE(sat) VCB=10V, f=1MHz IC=100mA, IB=10mA IC=100mA, IB=10mA 2.2 GHz 2.9 pF 2.6 0.15 0.9 pF V V 0.5 1.2 Collector Cutoff Current ICBO VCB=--20V, IE=0 --0.1 µA Emitter Cutoff Current IEBO hFE(1) VEB=--2V, IC=0 --1.0 µA DC Current Gain VCE=--5V, IC=--50mA VCE=--5V, IC=--300mA hFE(2) fT Gain-Bandwidth Product Output Capacitance Cob Reverse Transfer Capacitance Cre Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage 15 VCE=--5V, IC=--100mA VCB=--10V, f=1MHz VCB=--10V, f=1MHz IC=--100mA, IB=--10mA IC=--100mA, IB=--10mA VCE(sat) VBE(sat) Package Dimensions unit : mm 2229 pF pF --0.4 --0.9 6 5 4 --1.0 --1.2 V V 1 : Base2 2 : Emitter2 3 : Base1 4 : Collector1 5 : Emitter1 6 : Collector2 Tr1 0.2 0.15 0.6 4 2.8 0.05 1.6 GHz 4.4 Tr2 5 1.5 4.9 Electrcal Connection 2.9 6 100 5 1 2 3 0.6 Top view 3 0.95 1 : Base2 2 : Emitter2 3 : Base1 4 : Collector1 5 : Emitter1 6 : Collector2 0.7 0.9 2 0.2 1 0.4 SANYO : CPH6 IC -- VCE 500µA 40 --100 NPN Tr 450µA 400µA Collector Current, IC -- mA Collector Current, IC -- mA 50 350µA 300µA 30 250µA 200µA 20 150µA 10 100µA 0 50µA IB=0 0 4 8 12 16 Collector-to-Emitter Voltage, VCE -- V 20 ITR07141 --80 --60 IC -- VCE A A .0m 1.8m A --2 -6m --1. mA --1.4 mA --1.2 A --1.0m PNP Tr A --0.8m --0.6mA --40 --0.4mA --0.2mA --20 0 0 IB=0 --4 --8 --12 --16 --20 Collector-to-Emitter Voltage, VCE -- V ITR04387 No.7710-2/5 CPH6071 IC -- VCE 200 IC -- VCE --200 PNP Tr NPN Tr A 1.8mA 1.6mA Collector Current, IC -- mA Collector Current, IC -- mA 160 1.4mA 120 1.2mA 1.0mA 0.8mA 80 0.6mA 0.4mA 40 A --4.5m --4.0mA --3.5mA mA 0 --5. 2.0m --160 --3.0mA --2.5mA --120 --2.0mA --1.5mA --80 --1.0mA --40 --0.5mA 0.2mA IB=0 0 0 1 2 3 0 5 Collector-to-Emitter Voltage, VCE -- V --1 --2 --3 --4 Collector-to-Emitter Voltage, VCE -- V ITR07142 hFE -- IC 2 IB=0 0 4 --5 ITR04388 hFE -- IC 2 NPN Tr VCE=5V PNP Tr VCE= --5V 100 DC Current Gain, hFE DC Current Gain, hFE 100 7 5 3 2 7 5 3 2 10 7 5 10 3 5 7 2 10 3 5 7 100 2 3 5 Collector Current, IC -- mA 2 3 5 7 --10 Gain-Bandwidth Product, f T -- GHz 3 2 1.0 7 5 3 2 3 5 7 --100 2 3 5 7 ITR04389 f T -- IC 3 NPN Tr VCE=5V 2 Collector Current, IC -- mA 0.1 PNP Tr VCE= --5V 2 1.0 7 5 3 2 0.1 5 7 1.0 2 3 5 7 10 2 3 5 7 100 2 Collector Current, IC -- mA 3 5 5 7 --1.0 2 ITR07144 VCE(sat) -- IC 2 3 7 5 3 2 0.1 7 5 7 --10 2 3 5 7 --100 2 3 5 ITR04390 3 2 VCE(sat) -- IC PNP Tr IC / IB=10 2 1.0 5 Collector Current, IC -- mA 3 NPN Tr IC / IB=10 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 7 --1.0 ITR07143 f T -- IC 5 Gain-Bandwidth Product, f T -- GHz 3 5 7 1000 --1.0 7 5 3 2 --0.1 7 5 3 3 3 5 7 10 2 3 5 7 100 Collector Current, IC -- mA 2 3 5 ITR07145 5 7 --1.0 2 5 7 --10 2 3 5 7 --100 Collector Current, IC -- mA 3 5 ITR04391 No.7710-3/5 CPH6071 Cob, Cre -- VCB 10 NPN Tr f=1MHz Cob, Cre -- pF 5 Cob, Cre -- pF PNP Tr f=1MHz 2 7 Cob 3 Cob, Cre -- VCB 3 Cre 2 10 Cob Cre 7 5 3 2 1.0 1.0 7 2 1.0 3 5 7 2 10 3 Collector-to-Base Voltage, VCB -- V 3 DC 2 ms op era tio 100 n 7 5 3 2 7 2 --10 3 5 7 ITR04392 ASO PNP Tr 1m 3 s 10 IC= --300mA ms DC 2 op era tio --100 n 7 5 3 2 Ta=25°C 10 5 7 Ta=25°C --10 2 1.0 3 5 7 2 10 Collector-to-Emitter Voltage, VCE -- V 3 IT06701 PC -- Ta 1.2 Collector Dissipation, PC -- W 5 5 s 10 3 ICP= --600mA 7 Collector Current, IC -- mA IC=300mA 2 Collector-to-Base Voltage, VCB -- V 1m 5 7 --1.0 --1000 NPN Tr ICP=600mA 7 5 ITR07146 ASO 1000 Collector Current, IC -- mA 5 5 7 --1.0 2 3 5 7 2 --10 Collector-to-Emitter Voltage, VCE -- V 3 IT06700 NPN Tr / PNP Tr 1.0 0.9 M ou nte 0.8 do na ce ram 0.6 ic bo ard (6 00 0.4 mm 2 ✕0 .8m 0.2 m) 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT06699 No.7710-4/5 CPH6071 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2004. Specifications and information herein are subject to change without notice. PS No.7710-5/5