Ordering number:EN6004 PNP/NPN Silicon Epitaxial Planar Transistors CPH3104/3204 DC/DC Converter Applications Applications Package Dimensions · Relay drivers, lamp drivers, motor drivers, strobes. unit:mm 2150 Features [CPH3104/3204] 2.9 0.15 0.2 · Adoption of FBET and MBIT processes. · High current capacitance. · Low collector-to-emitter saturation voltage. · Ultrasmall-sized package permitting applied sets to be made small and slim (0.9mm). · High allowable power dissipation. 0.4 0.6 3 2 1 2.8 0.6 1.6 0 to 0.1 1.9 0.7 0.9 0.2 1 : Base 2 : Emitter 3 : Collector ( ) : CPH3104 Specifications SANYO : CPH3 Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (–)15 V Collector-to-Emitter Voltage VCEO (–)15 V Emitter-to-Base Voltage VEBO IC (–)5 V (–)1.5 A Collector Current Collector Current (Pulse) ICP Base Current IB Collector Dissipation Junction Temperature PC Tj Storage Temperature Tstg (–)3 (–)200 Mounted on a ceramic board (600mm2×0.8mm) A mA 0.9 W 150 ˚C –55 to +150 ˚C Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditions Collector Cutoff Current ICBO Emitter Cutoff Current IEBO VCB=(–)12V, IE=0 VEB=(–)4V, IC=0 DC Current Gain hFE1 hFE2 VCE=(–)2V, IC=(–)50mA VCE=(–)2V, IC=(–)800mA fT VCE=(–)2V, IC=(–)50mA Gain-Bandwidth Product Output Capacitance Cob Ratings min typ 200 max Unit (–)100 nA (–)100 nA 560 80 VCB=(–)10V, f=1MHz (300) MHz 200 MHz (15)10 Marking : CPH3104 : AD, CPH3204 : CD pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 40599 (KOTO) TA-1452 No.6004–1/4 CPH3104/3204 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage VCE(sat)1 VCE(sat)2 VBE(sat) Base-to-Emitter Saturation Voltage Emitter-to-Base Breakdown Voltage (–)25 mV (–)240 mV IC=(–)500mA, IC=(–)25mA (–)0.9 (–)1.2 V -600 -500 –2.0mA -400 -300 –1.0mA -200 IB=0 0 0 600 V CPH3204 500 2.0mA 400 1.0mA 300 200 -0.2 -0.4 -0.6 -0.8 IB=0 0 0 -1.0 Collector-to-Emitter Voltage, VCE – V –1.0 A –0.8m -160 –0.6mA -140 -120 -100 –0.4mA -80 –0.2mA -60 0.6 0.8 1.0 I C - VCE CPH3204 0.7mA 0.6mA 180 Collector Current, IC – mA -180 0.4 200 CPH3104 mA 0.2 Collector-to-Emitter Voltage, VCE – V I C - VCE -200 Collector Current, IC – mA V (–)5 100 -100 -40 160 0.5mA 140 0.4mA 120 100 0.3mA 80 0.2mA 60 40 0.1mA 20 -20 0 0 IB=0 -1 -2 -3 -4 IB=0 0 0 -5 Collector-to-Emitter Voltage, VCE – V 3 4 5 Ta=75° CPH3204 VCE=2V 800 600 25°C –25°C C 25°C –25°C -600 I C - VBE 400 Ta=75° Collector Current, IC – mA -800 -200 2 1000 CPH3104 VCE=–2V -400 1 Collector-to-Emitter Voltage, VCE – V I C - VBE -1000 Collector Current, IC – mA V (–)15 7.0mA 6.0mA 5.0mA 4.0mA 3.0mA 8.0 700 – (–)15 I C - VCE 800 Collector Current, IC – mA A –8 .0m Collector Current, IC – mA (–)10 CPH3104 –7.0mA –6.0mA –5.0mA –4.0mA A m 3.0 Unit max (–)120 I C - VCE -700 typ IC=(–)5mA, IB=(–)0.5mA IC=(–)500mA, IB=(–)25mA V(BR)CBO IC=(–)10µA, IE=0 V(BR)CEO IC=(–)1mA, RBE=∞ V(BR)EBO IC=(–)10µA, IC=0 Collector-to-Emitter Breakdown Voltage -800 min mA Collector-to-Base Breakdown Voltage Ratings Conditions 200 0 0 0 -0.2 -0.4 -0.6 -0.8 -1.0 Base-to-Emitter Voltage, VBE – V -1.2 0 0.2 0.4 0.6 0.8 1.0 1.2 Base-to-Emitter Voltage, VBE – V No.6004–2/4 CPH3104/3204 hFE - I C 1000 7 5 Ta=75°C Ta=75°C 3 DC Current Gain, hFE DC Current Gain, hFE CPH3204 VCE=2V 7 5 25°C –25°C 2 100 7 2 –25°C 100 7 5 3 3 2 3 5 7 -10 2 3 5 7 -100 2 3 5 7 -1000 2 3 5 3 5 7 10 2 VCE(sat) - IC -1000 5 3 2 °C 75 = Ta 25 °C C 5° 5 –2 3 2 -10 7 5 3 5 7 -10 2 3 5 7 -100 2 3 5 7 -1000 °C 75 7 5° 5 –2 3 2 10 7 5 Base-to-Emitter Saturation Voltage, VBE(sat) – V 25°C 5 3 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 2 VBE(sat) - IC CPH3204 IC/ IB=20 5 3 2 Ta=–25°C 1.0 7 25°C 75°C 5 3 3 5 7 -10 2 3 5 7 -100 2 3 5 7 -1000 2 2 3 5 7 10 2 Collector Current, IC – mA Gain Bandwidth Product, fT – MHz 5 3 CPH 2 CPH 310 4 320 4 10 7 3 5 7 1.0 2 3 5 7 5 7 100 2 3 5 7 1000 2 10 Collector-to-Base Voltage, VCB – V fT - IC 1000 f=1MHz For PNP, minus sign is omitted. 7 3 Collector Current, IC – mA Cob - VCB 100 Output Capacitance, Cob – pF C 7 2 5 °C 25 = Ta 10 3 2 5 CPH3204 IC/ IB=20 100 2 5 75°C 3 Collector Current, IC – mA 7 Ta=–25°C 2 2 CPH3104 IC/ IB=20 7 5 7 1000 3 VBE(sat) - IC -1.0 3 5 Collector Current, IC – mA -10 2 7 Collector-to-Emitter Saturation Voltage, VCE (sat) – mV Collector-to-Emitter Saturation Voltage, VCE (sat) – mV 7 7 5 7 100 VCE(sat) - IC 1000 CPH3104 IC/ IB=20 -100 3 Collector Current, IC – mA Collector Current, IC – mA Base-to-Emitter Saturation Voltage, VBE(sat) – V 25°C 3 5 2 hFE - I C 1000 CPH3104 VCE=–2V 2 VCE=2V For PNP, minus sign is omitted. 7 5 104 H3 CP 3 4 320 CPH 2 100 7 5 7 10 2 3 5 7 100 2 3 5 7 1000 Collector Current, IC – mA No.6004–3/4 CPH3104/3204 PC - Ta A S O 5 0µ s 1m 7 5 s 1.0 Collector Dissipation, PC – W ms 10 0m s DC op era tio 0µ IC s 10 50 2 n 3 2 0.1 CPH3104/3204 Ta=25°C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm2×0.8mm) 7 5 3 2 2 3 CPH3104/3204 10 ICP 3 Collector Current, IC – A 1.2 5 7 1.0 2 3 5 7 10 Collector-to-Emitter Voltage, VCE – V 2 3 1.0 M ou 0.9 nte do 0.8 na ce ram ic 0.6 bo ard (6 00 mm 0.4 2 ×0 .8m m) 0.2 0 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta – °C Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 1999. Specifications and information herein are subject to change without notice. PS No.6004–4/4