Ordering number:ENN6457 PNP/NPN Epitaxial Planar Silicon Transistors FP207 Push-Pull Circuit Applications Package Dimensions unit:mm 2097B [FP207] 1.5 5 4 3 2 1 0 to 0.1 0.2 0.3 1.75 1 : Base 1 (PNP TR) 2 : Collector 1 (PNP TR) 3 : Emitter Common 4 : Collector 2 (NPN TR) 5 : Base 2 (NPN TR) 6 : Collector 2 (NPN TR) 7 : Collector 1 (PNP TR) SANYO : PCP5 (Top view) 1.75 3.5 1.2 0.7 Specifications 0.4 0.2min 0.5 1.57 0.5 4.5 3.4 2.8 0.5 1.8 0.5 7 6 1.0 1.0 4.25max · Composite type with a PNP transistor and an NPN transistor contained in one package, facilitating highdensity mounting. · Each device incorporated in the FP207 is equivalent to the 2A1729 and to the 2SC4520, respectively. 2.5 Features ( ) : PNP Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (–)50 V Collector-to-Emitter Voltage VCEO VEBO (–)40 V (–)5 V IC (–)1.5 A Emitter-to-Base Voltage Collector Current Collector Current (Pulse) ICP (–)3 A Base Current IB PC 300 mA Mounted on a ceramic board (250mm2×0.8mm) 1unit 0.8 W Mounted on a ceramic board (250mm2×0.8mm) 1.1 150 W ˚C –55 to +150 ˚C Collector Dissipation Total Power Dissipation Junction Temperature PT Tj Storage Temperature Tstg Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditons Ratings min typ max Unit Collector Cutoff Current ICBO VCB=(–)40V, IE=0 (–)1 µA Emitter Cutoff Current IEBO (–)1 µA DC Current Gain Gain-Bandwidth Product hFE fT VEB=(–)3V, IC=0 VCE=(–)2V, IC=(–)100mA Output Capacitance Cob 100 VCE=(–)2V, IC=(–)100mA 400 300 VCB=(–)10V, f=1MHz (18)13 Marking : 207 MHz pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 92500TS (KOTO) TA-2925 No.6457–1/5 FP207 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage VCE(sat) Base-to-Emitter Saturation Voltage VBE(sat) min Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time ton Storage Time Fall Time See specified Test Circuit tf See specified Test Circuit max Unit (–0.3) (–0.8) mV 0.25 0.7 mV (–)0.9 (–)1.3 V (–)50 V (–)40 V (–)5 V (50) See specified Test Circuit tstg Electrical Connection (Top view) typ IC=(–)800mA, IB=(–)40mA IC=(–)800mA, IB=(–)40mA V(BR)CBO IC=(–)10µA, IE=0 V(BR)CEO IC=(–)1mA, RBE=∞ V(BR)EBO IE=(–)10µA, IC=0 Collector-to-Base Breakdown Voltage C1 Ratings Conditons (100) ns 50 100 ns (120) (220) ns 150 270 ns (30)30 (80)80 ns Switching Time Test Circuit IB1 IB2 C2 INPUT OUTPUT RB VR + PW=20µs D.C.≤1% RL + 50Ω 100µF C1 B1 470µF C2 EC VBE=--5V B2 VCC=25V (For PNP, the polarity is reversed.) 10IB1= --10IB2= IC=400mA IC -- VCE --1.0 -- 3.5mA --5mA --4mA --0.6 --3mA --0.4 --2mA --0.2 --2 --3 --4 2.5mA 0.6 2.0mA 1.5mA 0.4 1.0mA IB=0 0 0 --5 Collector-to-Emitter Voltage, VCE – V IT01846 IC -- VBE [PNP] --1.6 3.0mA 0.5mA IB=0 --1 0.8 0.2 --1mA 0 1 2 3 4 5 Collector-to-Emitter Voltage, VCE – V IT01847 IC -- VBE [NPN] 1.6 VCE=2V VCE= --2V 1.4 --0.4 0.8 0.6 0.4 --25°C Ta=7 5 °C 25°C --0.6 --25°C --0.8 1.0 °C --1.0 1.2 25°C --1.2 Ta=7 5 Collector Current, IC – A --1.4 Collector Current, IC – A [NPN] 4.0mA --6mA --0.8 0 IC -- VCE 1.0 Collector Current, IC – A Collector Current, IC – A [PNP] 7mA A --8m 0.2 --0.2 0 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE – V --1.2 IT01848 0 0.2 0.4 0.6 0.8 Base-to-Emitter Voltage, VBE – V 1.0 1.2 IT01849 No.6457–2/5 FP207 hFE -- IC 1000 1000 VCE= --2V 7 [NPN] VCE=2V 7 5 5 3 DC Current Gain, hFE DC Current Gain, hFE hFE -- IC [PNP] Ta=75°C 25°C 2 --25°C 100 7 5 3 Ta=75°C 25°C --25°C 2 100 7 5 3 2 3 10 --0.01 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC – A IT01850 Cob -- VCB [PNP] 100 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 3 IT01851 Cob -- VCB [NPN] 7 f=1MHz f=1MHz 5 Output Capacitance, Cob – pF 7 Output Capacitance, Cob – pF 2 Collector Current, IC – A 5 3 2 10 3 2 10 7 5 7 5 3 5 7 2 --1.0 3 5 7 2 --10 5 3 Collector-to-Base Voltage, VCB – V IT01852 f T -- IC [PNP] 5 5 7 2 1.0 3 5 7 2 10 IT01853 f T -- IC [NPN] 7 VCE=2V Gain-Bandwidth Product, f T – MHz Gain-Bandwidth Product, f T – MHz VCE= --2V 3 2 100 7 5 3 5 3 2 100 7 5 3 5 7 --10 2 3 5 7 --100 2 3 5 Collector Current, IC – A VCE(sat) -- IC --1000 5 3 2 7 °C 25 5 3 --0.01 3 5 7 100 2 3 5 Collector Current, IC – A 7 1000 2 IT01855 VCE(sat) -- IC 1000 7 --100 2 10 [PNP] IC / IB=20 C 75° Ta= °C --25 7 7 --1000 IT01854 Collector-to-Emitter Saturation Voltage, VCE (sat) – mV Collector-to-Emitter Saturation Voltage, VCE (sat) – mV 5 3 Collector-to-Base Voltage, VCB – V [NPN] IC / IB=20 7 5 3 2 Ta= --25°C 100 25°C 75°C 7 5 2 3 5 7 --0.1 2 3 5 Collector Current, IC – A 7 --1.0 2 3 IT01856 5 7 0.01 2 3 5 7 0.1 2 3 5 Collector Current, IC – A 7 1.0 2 3 IT01857 No.6457–3/5 FP207 VBE(sat) -- IC 5 VBE(sat) -- IC [PNP] 5 [NPN] 2 100 25°C Ta= --25°C 7 75°C 5 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC – A IT01858 SW Time -- IC [PNP] tstg 2 100 ton 7 tf 5 3 2 10 --0.1 2 3 5 10 m s s 0m s op era tio n 2 Ta=25°C Single pulse For PNP, the minus sign is omitted. 1unit Mounted on a ceramic board(250mm2×0.8mm) 5 7 2 1.0 3 5 2 7 10 2 3 5 7 IT01862 5 7 0.1 2 3 5 7 1.0 2 3 IT01859 SW Time -- IC [NPN] tstg 2 100 ton 7 5 tf 3 2 10 0.1 2 3 5 7 Collector Current, IC – A 2 1.0 IT01861 PC(TR2) -- PC(TR1) 0.8 0.6 0.4 0.2 0 Collector-to-Emitter Voltage, VCE – V 3 Collector Current, IC – A VCC=25V IC=20IB1= --20IB2 1.0 10 DC 7 0.01 IT01860 1m IC=1.5A 3 3 2 75°C 5 3 2 --1.0 ICP=3A 7 5 7 5 7 Collector Current, IC – A 1.0 0.1 25°C Ta= --25°C 7 5 ASO 2 1.0 5 VCC= --25V IC=20IB1= --20IB2 3 2 3 Switching Time, SW Time – ns 3 3 7 5 3 3 2 5 Switching Time, SW Time – ns Base-to-Emitter Saturation Voltage, VBE (sat) – V 3 3 --0.01 Collector Current, IC – A IC / IB=20 Collector Dissipation, PC (TR2) – W Base-to-Emitter Saturation Voltage, VBE (sat) – V IC / IB=20 Mounted on a ceramic board(250mm2×0.8mm) 0 0.2 0.4 0.6 0.8 Collector Dissipation, PC (TR1) – W 1.0 IT01863 PC -- Ta 1.2 Collector Dissipation, PC – W 1.1 1.0 To t 0.8 al di ss 0.6 1u nit ip at io n 0.4 0.2 0 Mounted on a ceramic board(250mm2×0.8mm) 0 20 40 60 80 100 120 Ambient Temperature, Ta – °C 140 160 IT01864 No.6457–4/5 FP207 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2000. Specifications and information herein are subject to change without notice. PS No.6457–5/5