Ordering number : ENN6794 CPH6311 P-Channel Silicon MOSFET CPH6311 Ultrahigh-Speed Switching Applications Preliminary Features • • Package Dimensions Low ON-state resistance. Ultrahigh-speed switching. 2.5V drive. unit : mm 2151A [CPH6311] 0.15 2.9 5 4 0.6 6 0.2 • 1 : Drain 2 : Drain 3 : Gate 4 : Source 5 : Drain 6 : Drain 2 3 0.95 0.7 0.9 1 0.2 0.6 1.6 2.8 0.05 Specifications 0.4 Absolute Maximum Ratings at Ta=25°C Parameter Symbol SANYO : CPH6 Conditions Ratings Unit Drain-to-Source Voltage VDSS --20 Gate-to-Source Voltage VGSS ±10 V --5 A Drain Current (DC) ID Drain Current (Pulse) IDP Allowable Power Dissipation PD Channel Temperature Tch Storage Temperature Tstg V PW≤10µs, duty cycle≤1% --20 A Mounted on a ceramic board (900mm2✕0.8mm) 1.6 W Mounted on a FR4 board PW≤5S 2.0 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 Conditions ID=--1mA, VGS=0 VDS=--20V, VGS=0 VGS=±8V, VDS=0 VDS=--10V, ID=--1mA VDS=--10V, ID=--3A ID=--3A, VGS=--4.5V ID=--1A, VGS=--2.5V Ratings min --20 typ --0.4 5.8 max --1 ±10 --1.4 8.5 32 46 42 60 Unit V µA µA V S mΩ mΩ Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2500 TS IM TA-3168 No.6794-1/4 CPH6311 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Reverse Transfer Capacitance Crss VDS=--10V, f=1MHz VDS=--10V, f=1MHz VDS=--10V, f=1MHz 170 pF Turn-ON Delay Time td(on) See specified Test Circuit 17 ns Rise Time tr td(off) See specified Test Circuit 100 ns See specified Test Circuit 100 ns See specified Test Circuit 95 ns VDS=--10V, VGS=--10V, ID=--5A VDS=--10V, VGS=--10V, ID=--5A 31 nC 2.8 nC Input Capacitance Ciss Output Capacitance Coss Turn-OFF Delay Time Fall Time tf Qg Total Gate Charge Gate-to-Source Charge Qgs Gate-to-Drain “Miller” Charge Qgd Diode Forward Voltage VSD VDS=--10V, VGS=--10V, ID=--5A IS=--5A, VGS=0 1230 pF 200 pF 4.2 nC --1.5 --0.83 V Marking : JM Switching Time Test Circuit VDD= --10V 0V --4.5V VIN ID= --3A RL=3.3Ω PW=10µs D.C.≤1% VIN VOUT D G P.G 50Ω S CPH6311 ID -- VDS ID -- VGS --8 VDS= --10V --4.0V --3.5 V --6 --3.0V --7 --3 --2 --1 VGS= --1.0V 0 --0.1 0 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Drain-to-Source Voltage, VDS -- V --0.9 0 --1.0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 Gate-to-Source Voltage, VGS -- V IT02276 RDS(on) -- VGS 140 C --25 --1 25° --2 --4 °C --3 --5 5°C --1.5V --6 Ta= 7 V --2. 0 --4 Drain Current, ID -- A --2.5V --4.5V Drain Current, ID -- A --5 --1.6 --1.8 IT02277 RDS(on) -- Ta 140 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Ta=25°C 120 100 --3.0A 80 60 ID= --1.0A 40 20 0 0 --1 --2 --3 --4 --5 --6 --7 --8 Gate-to-Source Voltage, VGS -- V --9 --10 IT02278 120 100 80 = --2.5V .0A, V GS 1 -= ID --4.5V A, V GS= I D= --3.0 60 40 20 0 --60 --40 --20 0 20 40 60 80 100 Ambient Temperature, Ta -- °C 120 140 160 IT02279 No.6794-2/4 yfs -- ID C 25° 0.1 7 5 3 2 --0.01 7 5 3 2 0.01 --0.01 --0.001 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Drain Current, ID -- A --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 IT02281 Ciss, Coss, Crss -- VDS 10000 VDD= --10V VGS= --4.5V f=1MHz 7 5 3 2 td(off) 100 7 5 tf tr 3 2 td(on) 10 7 5 3 2 Ciss 1000 7 5 3 3 2 Coss 2 Crss 100 1.0 --0.1 2 3 5 7 2 --1.0 3 5 Drain Current, ID -- A 7 0 --10 Drain Current, ID -- A --7 --6 --5 --4 --3 --2 --1 0 5 10 15 20 25 30 Total Gate Charge, Qg -- nC 35 ed on ac er am ic 1.0 bo ar d( 90 0m m2 ✕0 0.5 .8m m ) --12 --14 --16 --18 --20 IT02283 <10µs 1m 100µs s 10 ms 10 0m s ID= --5A --1.0 7 5 3 2 DC op Operation in era tio this area is n limited by RDS(on). --0.1 7 5 3 2 Ta=25°C Single pulse Mounted on a ceramic board(900mm2✕0.8mm) 5 7--0.1 2 3 5 7--1.0 2 3 5 7 --10 2 3 5 7--100 IT02285 PD -- Ta 2.5 nt --10 Drain-to-Source Voltage, VDS -- V Allowable Power Dissipation, PD -- W ou --10 7 5 3 2 IT02284 M 1.6 1.5 --8 IDP= --20A --0.01 --0.01 2 3 PD -- Ta 2.0 --6 ASO --100 7 5 3 2 --8 0 --4 Drain-to-Source Voltage, VDS -- V VDS= --10V ID= --5A --9 --2 IT02282 VGS -- Qg --10 Allowable Power Dissipation, PD -- W --0.1 Diode Forward Voltage, VSD -- V Ciss, Coss, Crss -- pF Switching Time, SW Time -- ns 0 IT02280 SW Time -- ID 1000 7 5 Gate-to-Source Voltage, VGS -- V --0.1 7 5 3 2 C 1.0 7 5 3 2 --25° --2 Ta= 75°C --1.0 7 5 3 2 5°C 5°C VGS=0 25° C 10 7 5 3 2 IF -- VSD --10 7 5 3 2 VDS= --10V Ta= 7 100 7 5 3 2 Forward Current, IF -- A Forward Transfer Admittance, yfs -- S CPH6311 2.0 M ou nt 1.5 ed on aF R4 bo ar 1.0 dP W ≤5 S 0.5 0 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT02286 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT02642 No.6794-3/4 CPH6311 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2000. Specifications and information herein are subject to change without notice. PS No.6794-4/4