ECH8613 Ordering number : ENN7780 ECH8613 P-Channel Silicon MOSFET High-Speed Switching Applications Features • • • Low ON-resistance. High-speed switching. 2.5V drive. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS --12 Gate-to-Source Voltage VGSS ±10 V --5 A Drain Current (DC) ID Drain Current (Pulse) V IDP PD PW≤10µs, duty cycle≤1% --40 A Mounted on a ceramic board (900mm2✕0.8mm)1unit 1.3 W PT Tch Mounted on a ceramic board (900mm2✕0.8mm) Channel Temperature Storage Temperature Tstg Allowable Power Dissipation Total Dissipation 1.5 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage V(BR)DSS Zero-Gate Voltage Drain Current IDSS1 IDSS2 Gate-to-Source Leakage Current IGSS Cutoff Voltage Forward Transfer Admittance VGS(off) yfs Static Drain-to-Source On-State Resistance RDS(on)1 RDS(on)2 Input Capacitance RDS(on)3 Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Conditions ID=--1mA, VGS=0 VDS=--4V, VGS=0 VDS=--12V, VGS=0 VGS=±8V, VDS=0 VDS=--6V, ID=--1mA VDS=--6V, ID=--2.5A ID=--2A, VGS=--5V Ratings min typ Unit max --12 V --0.4 5.5 ID=--1A, VGS=--4.5V ID=--0.5A, VGS=--2.5V VDS=--6V, f=1MHz VDS=--6V, f=1MHz VDS=--6V, f=1MHz Marking : FF --1 µA --10 µA ±10 µA --1.4 9.3 V S 26 33 28 37 mΩ mΩ 43 60 mΩ 1165 pF 320 pF 265 pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 71504 TS IM TA-101131 No.7780-1/4 ECH8613 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Turn-ON Delay Time td(on) See specified Test Circuit. 12 ns Rise Time tr td(off) See specified Test Circuit. 340 ns See specified Test Circuit. 100 ns tf See specified Test Circuit. 130 ns Turn-OFF Delay Time Fall Time Total Gate Charge Qg VDS=--6V, VGS=--5V, ID=--5A 9.5 nC Gate-to-Source Charge Qgs VDS=--6V, VGS=--5V, ID=--5A 2.1 nC Gate-to-Drain “Miller” Charge Qgd VDS=--6V, VGS=--5V, ID=--5A 1.4 Diode Forward Voltage VSD IS=--5A, VGS=0 0.83 nC --1.5 V 0.25 Package Dimensions unit : mm 2206B 2.3 5 1 0.25 4 0.15 2.8 0.3 8 0.65 2.9 0.07 0.9 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 SANYO : ECH8 Electrical Connection 8 7 6 Switching Time Test Circuit 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 1 2 3 4 VDD= --6V VIN 5 Top view 0V --5V ID= --3A RL=2Ω VOUT VIN D PW=10µs D.C.≤1% G ECH8613 P.G 50Ω S No.7780-2/4 ECH8613 VDS= --6V --7 --2.5 VGS= --1.5V --1.5 Ta= 75 ° C --25 °C --3.0 --5 --4 25 °C --3.5 --2.0 --6 Drain Current, ID -- A Drain Current, ID -- A --4.0 ID -- VGS --8 --2 .0V --4.5V --5.0V --4.5 --3.0 V --2.5 V ID -- VDS --5.0 --3 --2 --1.0 --1 --0.5 0 0 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 Drain-to-Source Voltage, VDS -- V Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 80 70 --2A 60 ID= --500mA 40 30 20 10 --6 --8 --10 3 2 yfs -- ID 3 2 C 5° --2 C = ° Ta 75 1.0 7 5 25 3 2 0.1 7 5 --1.6 --1.8 --2.0 IT07060 .5V 50 I D= 40 A, --0.5 = --2 VGS = --4.5V A, V GS I D= --1 = --5V A, V GS I D= --2 30 20 10 --40 --20 0 20 40 60 80 100 120 140 160 IT07062 IF -- VSD VGS=0 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 3 2 0.01 --0.001 2 3 5 7--0.01 2 3 5 7--0.1 2 3 5 7--1.0 2 3 Drain Current, ID -- A --0.01 --0.4 5 7 --10 IT07063 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 Diode Forward Voltage, VSD -- V SW Time -- ID 1000 7 5 --1.1 IT07064 Ciss, Coss, Crss -- VDS 3 f=1MHz 2 3 td(off) tf 2 100 7 5 3 Ciss, Coss, Crss -- pF Switching Time, SW Time -- ns --1.4 60 --10 7 5 °C --1.2 Ambient Temperature, Ta -- °C VDS= --6V 10 7 5 --1.0 70 IT07061 Forward Current, IF -- A Forward Transfer Admittance, yfs -- S Gate-to-Source Voltage, VGS -- V --0.8 RDS(on) -- Ta 0 --60 0 --4 --0.6 80 90 --2 --0.4 Gate-to-Source Voltage, VGS -- V Ta=25°C --1A 0 --0.2 IT07059 RDS(on) -- VGS 100 50 0 --1.0 --25° C --0.3 25°C --0.2 5°C --0.1 Ta= 7 0 tr 2 td(on) 10 7 5 3 2 --0.01 Ciss 1000 7 5 Coss Crss 3 2 VDD= --6V VGS= --5V 2 3 5 7 --0.1 2 3 5 7 --1.0 Drain Current, ID -- A 2 3 5 7 IT07065 100 0 --2 --4 --6 --8 --10 Drain-to-Source Voltage, VDS -- V --12 IT07066 No.7780-3/4 ECH8613 VGS -- Qg --5.0 VDS= --6V ID= --5A --4.5 --4.0 Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V --100 7 5 3 2 --3.5 --3.0 --2.5 --2.0 --1.5 --1.0 --0.5 0 0 1 2 3 4 5 6 7 8 Total Gate Charge, Qg -- nC 10 IT07067 IDP= --40A 1m s 10 ID= --5A DC ms 10 0m s op era tio --1.0 7 5 3 2 --0.1 7 5 3 2 <10µs n Operation in this area is limited by RDS(on). Ta=25°C Single pulse Mounted on a ceramic board (900mm2✕0.8mm)1unit --0.01 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 IT07068 Drain-to-Source Voltage, VDS -- V PD -- Ta 1.8 Allowable Power Dissipation, PD -- W 9 --10 7 5 3 2 ASO Mounted on a ceramic board (900mm2✕0.8mm) 1unit 1.6 1.5 1.4 1.3 1.2 To t al 1.0 1u 0.8 di ss ip ati on nit 0.6 0.4 0.2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT07069 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2004. Specifications and information herein are subject to change without notice. PS No.7780-4/4