Ordering number:EN3062A FC120 NPN Epitaxial Planar Silicon Composite Transistor High-Frequency General-Purpose Amp, Differential Amp Applications Features Package Dimensions · Composite type with 2 transistors contained in the CP package currently in use, improving the mounting efficiency greatly. · The FC120 is formed with two chips, being equivalent to the 2SC3142, placed in one package. · Excellent in thermal equilibrium and pair capability. unit:mm 2068 [FC120] Electrical Connection E1:Emitter1 E2:Emitter2 B2:Base2 C2:Collerctor2 B1:Base1 C1:Collector1 SANYO:CP6 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Collector-to-Base Voltage Symbol Conditions Ratings Unit 25 V Collector-to-Emitter Voltage VCBO VCEO 20 V Emitter-to-Base Voltage VEBO 3 V IC PC 30 mA 200 mW 300 mW 150 ˚C –55 to+150 ˚C Collector Current Collector Dissipation Total Power Dissipation Junction Temperature PT Tj Storage Temperature Tstg 1 unit Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=10V, IE=0 0.1 µA Emitter Cutoff Current IEBO hFE VEB=3V, IC=0 VCE=6V, IC=1mA 0.1 µA 80 hFE(small/ large) VBE(large -small) VCE=6V, IC=1mA 0.8 fT Cre VCE=6V, IC=4mA VCE=6V, f=1MHz DC Current Gain DC Current Gain Ratio Base to Emitter Voltage Drop Gain-Bandwidth Product Reverse Transfer Capacitance Base to Collector Time Constant Noise Figure rbb'cc NF Power Gain PG VCE=6V, IC=1mA 200 0.98 1.0 450 750 0.6 VCE=6V, IC=1mA, f=31.9MHz VCE=6V, IC=1mA, f=100MHz VCE=6V, IC=1mA, f=100MHz 15 mV MHz 0.9 19 pF ps 2.2 dB 28 dB Note: The specifications shown above are for each individual transistor. Marking:120 SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 52098HA (KT)/6169MO/5169MO, TS No.3062-1/6 FC120 NF, PG Test Circuit L1:1mmø plated wire, 10mmø 5T, 15mm pitch, tap : 2T from base side L2:1mmø plated wire, 10mmø 7T, 10mm pitch, tap : 2T from VC side L3:1mmø enamel wire, 10mmø 3T, 10mm pitch Unit (Capacitance:F) No.3062-2/6 FC120 No.3062-3/6 FC120 No.3062-4/6 FC120 No.3062-5/6 FC120 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No.3062-6/6