Ordering number:EN3478 FC143 NPN Epitaxial Planar Silicon Composite Transistor Switching Applications (with Bias Resistance) Applications Package Dimensions · Switching circuits, inverter circuits, interface circuits, driver circuits. unit:mm 2066 [FC143] Features · On-chip bias resistance (R1=4.7kΩ, R2=10kΩ). · Composite type with 2 transistors contained in the CP package currently in use, improving the mounting efficiency greatly. · The FC143 is formed with two chips, being equivalent to the 2SC4360, placed in one package. · Excellent in thermal equilibrium and pair capability. C1:Collector 1 C2:Collector 2 B2:Base 2 EC:Emitter Common B1:Base 1 Electrical Connection SANYO:CP5 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 50 V Collector-to-Emitter Voltage VCEO VEBO 50 V IC 100 Emitter-to-Base Voltage Collector Current Peak Collector Current ICP Collector Dissipation PC Total Dissipation Junction Temperature PT Tj Storage Temperature Tstg 6 V mA 200 mA 200 mW 300 mW 150 ˚C –55 to +150 ˚C 1 unit Electrical Characteristics at Ta = 25˚C Parameter Symbol Conditons Ratings min typ max Unit Collector Cutoff Current ICBO VCB=40V, IE=0 0.1 µA Collector Cutoff Current ICEO 0.5 µA Emitter Cutoff Current IEBO VCE=40V, IE=0 VEB=5V, IC=0 485 µA DC Current Gain VCE=5V, IC=10mA Gain-Bandwidth Product hFE fT VCE=10V, IC=5mA 250 Output Capacitance Cob VCB=10V, f=1MHz IC=10mA, IB=0.5mA 3.3 C-E Saturation Voltage C-B Breakdown Voltage C-E Breakdown Voltage VCE(sat) V(BR)CBO IC=10µA, IE=0 V(BR)CEO IC=100µA, RBE=∞ Input OFF-State Voltage VI(off) Input ON-State Voltage Input Resistance VI(on) R1 Resistance Ratio R1/R2 VCE=5V, IC=100µA VCE=0.2V, IC=10mA 262 340 50 0.1 MHz pF 0.3 50 V V 50 V 0.7 0.85 0.95 0.95 1.3 2.0 V V 3.3 4.7 6.1 kΩ 0.47 Note:The specifications shown above are for each individual transistor. Marking:143 SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 52098HA (KT)/7190MH, TA (KOTO) No.3478-1/2 FC143 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No.3478-2/2