SANYO FH103

Ordering number:ENN6217
NPN Epitaxial Planar Silicon Composite Transistor
FH103
High-Frequency Low-Noise Amplifier,
Differential Amplifier Applications
Package Dimensions
unit:mm
2149
[FH103]
0.25
6
5
4
E2
1 2
0.65
2.0
C1
3
Tr2
E1
1 : Collector1
2 : Emitter1
3 : Collector2
4 : Emitter2
5 : Base2
6 : Base1
SANYO : MCP6
0.9
Tr1
0 to 0.1
0.2
0.425
B2
1.25
2.1
Electrical Connection
B1
0.15
0.2
· Composite type with 2 transistors contained in the
MCP package currently in use, improving the
mounting efficiency greatly.
· The FH103 is formed with two chips, being equivalent to the 2SC4867, placed in one package.
· Excellent in thermal equilibrium and pair capability.
0.425
Features
C2
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
Unit
Collector-to-Base Voltage
VCBO
16
V
Collector-to-Emitter Voltage
VCEO
VEBO
8
V
Emitter-to-Base Voltage
Collector Current
IC
PC
Collector Dissipation
Total Dissipation
Junction Temperature
PT
Tj
Storage Temperature
Tstg
1.5
V
50
mA
Mounted on a ceramic board (250mm2×0.8mm) 1unit
300
mW
Mounted on a ceramic board (250mm2×0.8mm)
500
mW
150
˚C
–55 to +150
˚C
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
min
typ
max
Unit
Collector Cutoff Current
ICBO
VCB=10V, IE=0
1.0
µA
Emitter Cutoff Current
IEBO
10
µA
DC Current Gain
hFE
hFE
VEB=1V, IC=0
VCE=5V, IC=15mA
90
VCE=5V, IC=15mA
0.7
DC Current Gain Ratio
(small/large)
Base-to-Emitter Voltage Difference
VBE
(large-small)
200
0.95
VCB=5V, IC=15mA
1.0
mV
Continued on next page.
Note) The specifications shown above are for each individual transistor.
Marking : 103
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
N0199TS (KOTO) TA-1706 No.6217–1/4
FH103
Continued from preceding page.
Parameter
Symbol
Gain-Bandwidth Product
fT
Cob
Output Capacitance
Forward Transfer Gain
min
typ
9
VCB=10V, f=1MHz
0.6
VCE=5V, IC=15mA, f=1GHz
NF
VCE=5V, IC=5mA, f=1GHz
10
Unit
max
VCE=5V, IC=15mA
| S21e |2
Noise Figure
Ratings
Conditions
GHz
1.1
pF
13
dB
1.2
2.5
dB
Note) The specifications shown above are for each individual transistor.
Marking : 103
hFE -- IC
3
fT -- IC
2
VCE=5V
VCE=5V
Gain-Bandwidth Product, fT – GHz
DC Current Gain, hFE
2
100
7
5
3
2
10
10
7
5
3
2
1.0
7
5
7
3
5
3
5
7 1.0
2
3
5
7
2
10
3
5
7 100
Collector Current, IC – mA
1.0
7
5
3
2
0.1
7
5
7 1.0
2
3
5
7 10
2
Collector-to-Base Voltage, VCB -- V
3
5
6
4
2
3
5
7 100
IT00301
2
1.0
7
5
3
2
0.1
7
2
3
5
7 1.0
2
3
5
7 10
2
Collector-to-Base Voltage, VCB -- V
2
8
2
10
f=1MHz
S21e2 -- IC
16
VCE=5V
f=1GHz
7
3
IT00302
NF -- IC
10
5
Cre -- VCB
5
7 0.1
Forward Transfer Gain, S21e – dB
Output Capacitance, Cob – pF
2
3
3
Collector Current, IC – mA
Reverse Transfer Capacitance, Cre – pF
f=1MHz
2
2
1.0
5
3
5
7 0.1
7
IT00300
Cob -- VCB
5
Noise Figure, NF – dB
5
2
3
5
IT00303
VCE=5V
f=1GHz
14
12
10
8
6
4
2
0
0
7
1.0
2
3
5
7
10
2
Collector Current, IC – mA
3
5
7
IT00304
3
5
7
1.0
2
3
5
7 10
2
Collector Current, IC – mA
3
5
7 100
IT00305
No.6217–2/4
FH103
PC -- Ta
Collector Dissipation, PC – mW
600
Mounted on a ceramic board (250mm2×0.8mm)
500
400
To
t
al
300
di
ss
ip
ati
on
1u
nit
200
100
0
0
20
40
60
80
100
120
140
Ambient Temperature, Ta – °C
160
IT00306
S parameter
VCE=5V
f=200MHz to 2000MHz(200MHz Step)
j50
j25
j100
j150
150
±180°
250
A
mA
0.2
GH
--j250
--j200
--j150
z
0.2G
Hz
12
16 20
0
--30°
--150°
--60°
--120°
--j50
--90°
IT00307
mA
A
j100
j150
30°
j200
j250
j10
IC =
5
IC =
15m
j25
z
Hz
0.2
GH
0.2
G
j50
60°
2.0
GH
z
2.0
GH
120°
150°
IT00308
VCE=5V
f=200MHz to 2000MHz(200MHz Step)
z
VCE=5V
f=200MHz to 2000MHz(200MHz Step)
90°
0.04 0.08 0.12 0.16 0.2
0
0
10
50
100
150
5m
A
Hz
G
z
2.0
GH IC=5mA
2.0
--j10
--150°
250
IT00309
--j250
--j200
--j150
--j100
--j25
--60°
--90°
25
IC
=1
--30°
--120°
8
--j100
--j25
±180°
4
5m
=1
IC
=5
IC
--j10
100
50
30°
Hz
z
10
GH
2.0GHz
0
z
GH
2.0
2.0
25
60°
2.0G
j200
j250
j10
VCE=5V
f=200MHz to 2000MHz(200MHz Step)
90°
0.2G 120°
Hz
IC
=1
5m
A
0.2GHz I
C=5m
150°
A
--j50
IT00310
No.6217–3/4
FH103
S Parameters (Common emitter)
VCE=5V, IC=5mA, ZO=50Ω
Freq (MHz)
| S11 |
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
200
0.749
–50.7
12.229
141.6
0.044
65.4
0.847
–25.4
400
0.583
–85.7
8.900
118.1
0.068
54.3
0.655
–37.4
600
0.487
–109.6
6.636
103.7
0.081
51.6
0.538
–42.3
800
0.428
–126.6
5.276
93.9
0.093
51.6
0.473
–44.4
1000
0.405
–139.3
4.379
85.9
0.106
52.6
0.443
–46.2
1200
0.387
–150.6
3.731
78.7
0.117
53.6
0.421
–48.1
1400
0.377
–160.1
3.258
72.6
0.130
54.4
0.405
–49.6
1600
0.365
–166.8
2.924
67.5
0.142
55.2
0.393
–52.1
1800
0.362
–174.3
2.589
61.9
0.156
55.6
0.387
–54.3
2000
0.361
178.3
2.363
56.8
0.171
55.9
0.383
–56.4
∠ S11
| S21 |
∠ S21
| S12 |
∠ S12
| S22 |
∠ S22
VCE=5V, IC=15mA, ZO=50Ω
Freq (MHz)
| S11 |
200
0.507
–81.6
19.422
124.2
0.033
61.9
0.650
–36.9
400
0.382
–119.5
11.595
103.8
0.050
61.0
0.445
–43.0
600
0.341
–140.9
8.046
93.3
0.065
63.3
0.365
–43.5
800
0.332
–154.0
6.182
86.4
0.081
65.1
0.330
–43.3
1000
0.320
–163.0
5.063
79.8
0.099
65.6
0.318
–43.8
1200
0.316
–170.9
4.263
74.1
0.116
65.7
0.311
–45.9
1400
0.315
–178.0
3.716
69.2
0.134
65.0
0.304
–47.4
1600
0.314
176.7
3.270
64.3
0.150
64.4
0.297
–50.3
1800
0.311
171.2
2.922
60.0
0.167
63.3
0.293
–52.6
2000
0.313
165.4
2.656
55.9
0.186
62.1
0.295
–54.8
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of November, 1999. Specifications and information herein are subject
to change without notice.
PS No.6217–4/4