MCH6534 Ordering number : ENN7643 MCH6534 NPN Epitaxial Planar Silicon Transistor Switching, Driver Applications Applications • Low-frequency power amplifier, high-speed switching motor drivers, muting. Features • • • Composite type with 2 NPN transistors contained in a single package, facilitating high-density mounting. Ultrasmall package permitting applied sets to be small and slim. Small ON-resistance (Ron). Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 20 V Collector-to-Emitter Voltage VCEO 15 V Emitter-to-Base Voltage VEBO 5 Collector Current IC Collector Current (Pulse) 700 V mA ICP PC 1.4 A Collector Dissipation Mounted on a ceramic board (600mm2✕0.8m) 0.5 W Total Power Dissipation PT Mounted on a ceramic board (600mm2✕0.8m) 0.55 W Junction Temperature Tj 150 °C Storage Temperature Tstg --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Conditions Ratings min typ max VCB=15V, IE=0 100 nA VEB=4V, IC=0 100 nA hFE fT VCE=2V, IC=10mA Gain-Bandwidth Product VCE=2V, IC=50mA 330 Output Capacitance Cob VCB=10V, f=1MHz 3.2 IC=200mA, IB=10mA IC=200mA, IB=10mA 150 300 0.9 1.2 Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage VCE(sat) Unit Collector-to-Base Breakdown Voltage VBE(sat) V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=10µA, IE=0 IC=1mA, RBE=∞ Emitter-to-Base Breakdown Voltage V(BR)EBO IE=10µA, IC=0 300 800 MHz pF 20 mV V V 15 V 5 V Marking : EG Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 42004EA TS IM TA-100671 No.7643-1/4 MCH6534 Continued from preceding page. Parameter Symbol Turm-ON Time ton tstg tf Storage Time Fall Time 0.25 3 2 0.65 1 Unit max 30 ns See specified test circuit. 77 ns See specified test circuit. 40 ns 6 5 4 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 1 2 3 Top view 0.15 0.07 1.6 0.25 2.1 6 typ Electrical Connection 0.3 5 min See specified test circuit. Package Dimensions unit : mm 2224 4 Ratings Conditions 2.0 6 5 4 1 2 3 0.85 (Bottom view) (Top view) 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 SANYO : MCPH6 Switching Time Test Circuit IB1 PW=20µs D.C.≤1% OUTPUT IB2 INPUT RB VR RL 50Ω + 220µF + 470µF VBE= --5V VCC=5V IC=20IB1= --20IB2=500mA IC -- VCE 200 mA 0.9 0.5mA 120 0.4mA 100 0.3mA 80 0.2mA 60 0.1mA 40 600 500 400 Ta= 75° C 25°C --25 °C 0.6mA Collector Current, IC -- mA 700 160 140 VCE=2V 0.7mA 0 1.0mA Collector Current, IC -- mA 180 IC -- VBE 800 .8mA 300 200 100 20 IB=0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Collector-to-Emitter Voltage, VCE -- V 1.8 0 2.0 IT05490 0 0.2 0.4 0.6 0.8 1.0 Base-to-Emitter Voltage, VBE -- V 1.2 IT05491 No.7643-2/4 MCH6534 hFE -- IC 1000 DC Current Gain, hFE Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 25°C Ta=75°C 3 --25°C 2 100 7 5 3 1.0 2 3 5 7 10 2 3 5 7 100 2 3 VCE(sat) -- IC 1000 2 °C 75 5°C --2 5°C = Ta 5 2 3 2 10 1.0 2 3 5 7 10 2 3 5 7 100 2 3 Gain-Bandwidth Product, fT -- MHz Output Capacitance, Cob -- pF 7 5 3 2 2 3 5 7 1.0 2 3 5 7 2 10 Collector-to-Base Voltage, VCB -- V ON-resistance, Ron -- Ω 5 7 10 2 3 °C 5 7 100 2 3 5 7 1000 IT05493 VBE(sat) -- IC IC / IB=20 5 3 2 Ta= --25°C 1000 7 75°C 5 25°C 3 2 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05495 fT -- IC VCE=2V 5 3 2 100 7 2 3 5 7 10 2 3 5 7 100 2 Collector Current, IC -- mA 3 5 7 1000 IT05496 PC -- Ta Mounted on a ceramic board (600mm2✕0.8mm) OUT IN 0.6 1kΩ 2 IB 10 7 5 3 0.7 1kΩ 3 2 IT05497 Ron -- IB f=1MHz 25 2 5 1.0 3 Collector Dissipation, PC -- W 100 7 5 3 7 f=1MHz 1.0 0.1 = Ta 5 Collector Current, IC -- mA Cob -- VCB 10 °C 75 C 5° --2 7 100 1.0 5 7 1000 IT05494 Collector Current, IC -- mA 100 Collector Current, IC -- mA Base-to-Emitter Saturation Voltage, VBE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 7 2 7 5 100 3 10000 IC / IB=50 7 5 10 1.0 5 7 1000 IT05492 Collector Current, IC -- mA IC / IB=20 7 7 5 VCE(sat) -- IC 1000 VCE=2V 3 2 1.0 7 5 3 0.55 0.5 0.4 To ta 0.3 1u lD iss nit ipa tio n 0.2 0.1 2 0.1 0.1 0 2 3 5 7 1.0 2 Base Current, IB -- mA 3 5 7 10 IT06067 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT06387 No.7643-3/4 MCH6534 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 2004. Specifications and information herein are subject to change without notice. PS No.7643-4/4