Ordering number : ENN6918A CPH5503 NPN Epitaxial Planar Silicon Transistor CPH5503 DC / DC Converter Applications Package Dimensions Relay drivers, lamp drivers, motor drivers, strobes. unit : mm 2162 Features 0.15 3 0.6 4 1 0.05 2 0.95 0.4 0.9 0.7 0.2 • 5 1.6 • Composite type with two NPN transistors contained in one package facilitating high-density mounting. The two chips contained are equivalent to the CPH3209. Ultrasmall package permitting applied sets to be made small and slim.(0.9mm) 0.6 • [CPH5503] 2.9 0.2 • 2.8 Applications 0.4 1 : Collector(TR1) 2 : Collector(TR2) 3 : Base(TR2) 4 : Emitter Common 5 : Base(TR1) SANYO : CPH5 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 40 V Collector-to-Emitter Voltage VCEO 30 V Emitter-to-Base Voltage VEBO 5 V IC 3 A Collector Current Collector Current (Pulse) Collector Dissipation ICP PC Mounted on a ceramic board (600mm2✕0.8mm) Total Dissipation PT Mounted on a ceramic board (600mm2✕0.8mm) Junction Temperature Tj Storage Temperature Tstg 5 A 0.9 W 1.2 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Symbol ICBO IEBO Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product hFE fT Output Capacitance Cob Conditions VCB=30V, IE=0 VEB=4V, IC=0 VCE=2V, IC=500mA Ratings min typ max 200 VCE=10V, IC=500mA VCB=10V, f=1MHz 0.1 µA 0.1 µA 560 450 MHz 20 Marking : EC Unit pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D0301 TS IM TA-3530 / 22001 TS IM TA-3127 GI IM No.6918-1/4 CPH5503 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage VBE(sat) V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Turn-ON Time IC=10µA, IE=0 IC=1mA, RBE=∞ Fall Time Unit max 120 180 mV 220 330 mV 0.85 1.2 V V 30 V 5 V 30 ns See specified Test Circuit 300 ns See specified Test Circuit 15 ns Switching Time Test Circuit Electrical Connection IB1 PW=20µs D.C.≤1% typ 40 IE=10µA, IC=0 See specified Test Circuit ton tstg tf Storage Time min IC=1.5A, IB=30mA IC=3A, IB=60mA IC=1.5A, IB=30mA VCE(sat) Base-to-Emitter Saturation Voltage Ratings Conditions B1 EC B2 OUTPUT IB2 INPUT RB VR RL 24Ω 50Ω C1 + 470µF + 100µF VBE= --5V C2 VCC=12V IC=20IB1= --20IB2=500mA IC -- VCE 2.5 0.8 2.0mA 0.4 1.5 1.0 0.5 IB=0 0 0 200 400 600 800 Collector-to-Emitter Voltage, VCE -- mV 25°C --25°C 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 2 3 5 7 10 IT03044 0.4 0.6 0.8 1.0 IT03043 VCE(sat) -- IC 1.0 7 5 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Ta=75°C 2 0.2 Base-to-Emitter Voltage, VBE -- V VCE=2V 5 100 0.01 0 IT03042 7 3 0 1000 hFE -- IC 1000 DC Current Gain, hFE 2.0 25°C --25°C m 10 4.0mA 20mA Ta=75°C 1.2 A 6.0m Collector Current, IC -- A Collector Current, IC -- A 1.6 8.0 IC -- VBE 3.0 VCE=2V mA A 50mA 40mA 30 mA 2.0 IC / IB=20 3 2 0.1 7 5 °C 75 Ta= 5°C --2 3 2 C 25° 0.01 7 5 3 2 0.001 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 2 3 5 7 10 IT03047 No.6918-2/4 CPH5503 VCE(sat) -- IC VBE(sat) -- IC 10 IC / IB=50 IC / IB=50 7 Base-to-Emitter Saturation Voltage, VBE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 10 7 5 3 2 1.0 7 5 5 3 2 1.0 3 2 °C 75 Ta= 5°C --2 0.1 7 5 3 Ta= --25°C 7 75°C 5 25°C 3 2 C 25° 2 0.01 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 0.1 0.01 5 7 10 IT03048 Collector Current, IC -- A 3 5 7 0.1 2 3 5 7 1.0 2 Gain-Bandwidth Product, f T -- MHz 3 2 10 1.0 2 3 5 7 2 10 3 VCE=10V Collector-to-Base Voltage, VCB -- V 2 100 7 5 2 3 5 7 100 2 3 5 7 1000 Collector Current, IC -- mA 2 3 IT03045 PC -- Ta 1.4 IC=3A DC ms 0m s 0µ 10 10 s s 1.0 7 5 1.2 0µ 1m 50 3 2 10 Collector Current, IC -- A 3 ICP=5A s op era tio 3 2 n 0.1 7 5 3 2 Ta=25°C Single pulse Mounted on a ceramic board(600mm2✕0.8mm) 1unit 0.01 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Collector-to-Emitter Voltage, VCE -- V 1.0 To t 0.9 al 0.8 nit 0.6 Di ss 1u ip ati on 0.4 0.2 Mounted on a ceramic board(600mm2✕0.8mm) 0 3 5 IT03050 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT03051 PC(TR2) -- PC(TR1) 1.0 Collector Dissipation, PC(TR2) -- W 5 IT03046 ASO 10 7 5 7 3 10 5 Collector Dissipation, PC -- W Output Capacitance, Cob -- pF 5 5 7 10 IT03049 f T -- IC 1000 f=1MHz 7 3 Collector Current, IC -- A Cob -- VCB 100 2 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 Mounted on a ceramic board(600mm2✕0.8mm) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Collector Dissipation, PC(TR1) -- W 0.9 1.0 IT03052 No.6918-3/4 CPH5503 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2001. Specifications and information herein are subject to change without notice. PS No.6918-4/4