FJN5471 FJN5471 For Output Amplifier of Electronic Flash Unit • High DC Currrent Gain • Low Collector-Emitter Saturation Voltage • High Performance at Low Supply Voltage TO-92 1 1. Emitter 2. Collector 3. Base NPN Epitaxial Silicon Transistor Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCBO Collector-Base Voltage Parameter Ratings 40 Units V VCEO VEBO Collector-Emitter Voltage 20 V Emitter-Base Voltage 7 V IC Collector Current 5 A PC Collector Dissipation 0.75 W TJ Junction Temperature 150 °C TSTG Storage Temperature -55 ~ 150 °C Electrical Characteristics TC=25°C unless otherwise noted Symbol BVCEO Parameter Collector-Emitter Voltage Test Condition IC=1mA, IB=0 BVEBO Emitter Base Voltage IC=100µA, IC=0 ICBO Collector Cut-off Current VCB=10V, IE=0 Min. 20 Typ. Max. Units V 0.1 µA 0.1 µA V 7 V IEBO Emitter Cut-off Current VEB=7V, IC=0 hFE DC Current Gain VCE=2V, IC=0.5A VCE (sat) Collector-Emitter Saturation Voltage IC=3A, IB=0.1A 0.5 VBE (sat) Base-Emitter Saturation Voltage IC=3A, IB=0.1A 1.5 fT Current Gain Band Width Product VCE=6V, IC=50mA 150 MHz Cob Collector Output Capacitance VCB=20V, IE=0, f=1MHz 25 pF 700 1000 V Thermal Characteristics TC=25°C unless otherwise noted Symbol RθjA Parameter Thermal Resistance, Junction to Ambient ©2002 Fairchild Semiconductor Corporation Max 165 Units °C/W Rev. A1, August 2002 FJN5471 Typical Characteristics 7 8 VCE=2V 7 6 IC[A], COLLECTOR CURRENT IC[A], COLLECTOR CURRENT IB=14mA IB=12mA 5 6 IB=10mA 5 IB=8mA 4 IB=6mA 4 3 IB=4mA o Ta=125 C 3 2 0.8 1.0 1 0 0 1 2 3 4 0 0.0 5 VCE[V], COLLECTOR-EMITTER VOLTAGE o Ta=25 C o Ta=-40 C 100 10 0.1 1 0.6 1.2 10 100 o 0.1 Ta=125 C o Ta=25 C o Ta=-40 C 0.01 1E-3 0.1 1 10 IC[A], COLLECTOR CURRENT IC[A], COLLECTOR CURRENT Figure 3. DC current Gain IC=30IB 1 VCE(sat)[V], SATURATION VOLTAGE 1000 0.4 Figure 2. Base-Emitter On Voltage VCE=2V o Ta=125 C 0.2 VBE[V], BASE-EMITTER VOLTAGE Figure 1. Static Characteristic hFE, DC CURRENT GAIN o -40 C 2 IB=2mA 1 Figure 4. Collector-Emitter Saturation Voltage 80 10 IE=0,f=1MHZ IC=30IB Cob[pF], OUTPUT CAPACITANCE VBE(sat)[V], SATURATION VOLTAGE o 25 C 60 o 1 Ta=-40 C o Ta=25 C 40 o Ta=125 C 20 0.1 0.1 0 1 IC[A], COLLECTOR CURRENT Figure 5. Base-Emitter On Voltage ©2002 Fairchild Semiconductor Corporation 10 1 10 100 VCB[V], COLLECTOR-BASE VOLTAGE Figure 6. Collector Output Capacitance Rev. A1, August 2002 FJN5471 Typical Characteristics (Continued) 1.0 PC [W], POWERDISSIPATION 0.8 0.6 0.4 0.2 0.0 0 25 50 75 100 125 150 o Ta [ C], AMBIENTTEMPERATURE Figure 7. Power Derating ©2002 Fairchild Semiconductor Corporation Rev. A1, August 2002 FJN5471 ©2002 Fairchild Semiconductor Corporation Rev. A1, August 2002 FJN5471 Package Dimensions TO-92 +0.25 4.58 ±0.20 4.58 –0.15 ±0.10 14.47 ±0.40 0.46 1.27TYP [1.27 ±0.20] 1.27TYP [1.27 ±0.20] ±0.20 (0.25) +0.10 0.38 –0.05 1.02 ±0.10 3.86MAX 3.60 +0.10 0.38 –0.05 (R2.29) Dimensions in Millimeters ©2000 Fairchild Semiconductor Corporation Rev. A1, August 2002 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT™ ActiveArray™ FACT Quiet series™ Bottomless™ FAST® FASTr™ CoolFET™ CROSSVOLT™ FRFET™ GlobalOptoisolator™ DOME™ EcoSPARK™ GTO™ E2CMOS™ HiSeC™ EnSigna™ I2C™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™ ImpliedDisconnect™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET® VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. ©2002 Fairchild Semiconductor Corporation Rev. I1