74LVQ14 HEX SCHMITT INVERTER ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ HIGH SPEED: tPD = 6 ns (TYP.) at VCC = 3.3V COMPATIBLE WITH TTL OUTPUTS LOW POWER DISSIPATION: ICC = 2 µA (MAX.) at TA = 25 oC LOW NOISE: VOLP = 0.3 V (TYP.) at VCC = 3.3V 75Ω TRANSMISSION LINE DRIVING CAPABILITY SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 12 mA (MIN) PCI BUS LEVELS GUARANTEED AT 24mA BALANCED PROPAGATION DELAYS: tPLH ≅ tPHL OPERATING VOLTAGE RANGE: VCC (OPR) = 2V to 3.6V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 14 IMPROVED LATCH-UP IMMUNITY DESCRIPTION The LVQ14 is a low voltage CMOS HEX SCHMITT INVERTER fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and low noise 3.3V applications. The internal circuit is composed of 3 stages M (Micro Package) T (TSSOP Package) ORDER CODES : 74LVQ14M 74LVQ14T including buffer output, which enables high noise immunity and stable output. It has better speed performance at 3.3V than 5V lsttl family combined with the true CMOS low power consumption. Pin configuration and function are the same as those of the LVQ04 but the LVQ14 has hysteresis between the positive and negative input threshold typically of 1V. This together with its schmitt trigger function allows it to be used on line receivers with slow rise/fall input signals. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage. PIN CONNECTION AND IEC LOGIC SYMBOLS February 1999 1/8 74LVQ14 INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL 1, 3, 5, 9, 11, 13 1A to 6A Data Inputs NAME AND FUNCT ION 2, 4, 6, 8, 10, 12 1Y to 6Y Data Outputs 7 GND Ground (0V) 14 VCC Positive Supply Voltage TRUTH TABLE A Y L H H L ABSOLUTE MAXIMUM RATINGS Symbol Parameter Unit -0.5 to +7 V VI DC Input Voltage -0.5 to VCC + 0.5 V VO DC Output Voltage -0.5 to VCC + 0.5 V IIK DC Input Diode Current ± 20 mA IOK DC Output Diode Current ± 20 mA IO DC Output Current ± 50 mA ± 300 mA VCC Supply Voltage Value ICC or IGND DC VCC or Ground Current Tstg Storage Temperature TL Lead Temperature (10 sec) -65 to +150 o 300 o C C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. RECOMMENDED OPERATING CONDITIONS Symbol VCC Parameter Supply Voltage (note 1) Unit V V VI Input Voltage 0 to VCC VO Output Voltage 0 to VCC Top Operating Temperature: 1) Truth Table guaranteed: 1.5V to 3.6V 2/8 Valu e 2 to 3.6 -40 to +85 V o C 74LVQ14 DC SPECIFICATIONS Symb ol Parameter Test Co nditions Valu e T A = 25 oC V CC (V) Min. T yp. Un it -40 to 85 o C Max. Min. 2.2 Max. Vt+ Positive Input Threshold 3.0 Vt- Negative Input Threshold 3.0 VH Hysteresis Voltage 3.0 VOH High Level Output Voltage 3.0 Low Level Output Voltage 3.0 Input Leakage Current 3.6 VI = VCC or GND ±0.1 ±1 µA ICC Quiescent Supply Current 3.6 VI = VCC or GND 2 20 µA IOLD Dynamic Output Current (note 1, 2) 3.6 VOLD = 0.8 V max 36 mA VOHD = 2 V min -25 mA 0.9 0.3 V I (* ) = V IL I O =-50 µA IO=-12 mA 1.2 2.9 2.99 (* ) VI = V IH 0.3 2.58 IOHD V 1.2 V V 2.48 2.2 IO=50 µA 0.002 0.1 0.1 IO=12 mA 0 0.36 0.44 IO=24 mA II V 2.9 IO=-24 mA VOL 2.2 0.9 V 0.55 1) Maximum test duration 2ms, one output loaded attime 2) Incident wave switching is guaranteed on transmission lines with impedances as low as 50 Ω. (*) All outputs loaded. DYNAMIC SWITCHING CHARACTERISTICS Symb ol Parameter Test Co nditions Dynamic Low Voltage Quiet Output (note 1, 2) 3.3 VIHD Dynamic High Voltage Input (note 1, 3) 3.3 VILD Dynamic Low Voltage Input (note 1, 3) 3.3 VOLV Min. -0.8 C L = 50 pF Un it o T A = 25 C V CC (V) VOLP Valu e o -40 to 85 C T yp. Max. 0.3 0.8 Min. Max. -0.3 2 V 0.8 1) Worst case package. 2) Max number of outputs defined as (n). Data inputs are driven 0V to 3.3V, (n -1) outputs switching and one output at GND. 3) Max number of data inputs (n) switching. (n-1) switching 0V to3.3V. Inputs under test switching: 3.3V to threshold (VILD), 0V to threshold (VIHD).,f=1MHz. 3/8 74LVQ14 AC ELECTRICAL CHARACTERISTICS (CL = 50 pF, RL = 500 Ω, Input tr = tf =3 ns) Symb ol Parameter T est Con ditio n V CC (V) tPLH tPHL Propagation Delay Time tOSLH tOSHL Output to Output Skew Time (note 1, 2) 2.7 3.3(*) 2.7 3.3(*) Valu e T A = 25 oC -40 to 85 o C Min. T yp. Max. Min. Max. 7.0 16.0 19.0 6.0 0.5 0.5 11.5 1.0 1.0 13.0 1.5 1.5 Un it ns ns 1) Skew is defined as the absolute value of the difference between the actual propagation delay for any twooutputs of the same device switching in the same direction, either HIGH or LOW 2) Parameter guaranteed by design (*) Voltage range is 3.3V ± 0.3V CAPACITIVE CHARACTERISTICS Symb ol Parameter Test Co nditions C IN Input Capacitance 3.3 CPD Power Dissipation Capacitance (note 1) 3.3 Valu e o Un it o -40 to 85 C T A = 25 C Min. T yp. Max. Min. Max. V CC (V) fIN = 10 MHz 4 pF 29 pF 1) CPD isdefined as the value of the IC’sinternal equivalent capacitance which is calculated fromthe operating current consumption without load. (Referto Test Circuit).Average operting current can be obtained by the following equation. ICC(opr) = CPD • VCC • fIN + ICC/6(per gate) 4/8 74LVQ14 TEST CIRCUIT CL = 50 pF or equivalent (includes jigand probe capacitance) RL = R1 = 500Ω orequivalent RT = ZOUT of pulse generator (typically 50Ω) WAVEFORM: PROPAGATION DELAYS (f=1MHz; 50% duty cycle) 5/8 74LVQ14 SO-14 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 e3 0.050 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8 (max.) P013G 6/8 74LVQ14 TSSOP14 MECHANICAL DATA mm DIM. MIN. inch TYP. A MAX. MIN. TYP. MAX. 1.1 0.433 A1 0.05 0.10 0.15 0.002 0.004 0.006 A2 0.85 0.9 0.95 0.335 0.354 0.374 b 0.19 0.30 0.0075 0.0118 c 0.09 0.20 0.0035 0.0079 D 4.9 5 5.1 0.193 0.197 0.201 E 6.25 6.4 6.5 0.246 0.252 0.256 E1 4.3 4.4 4.48 0.169 0.173 0.176 e 0.65 BSC 0.0256 BSC K 0o 4o 8o 0o 4o 8o L 0.50 0.60 0.70 0.020 0.024 0.028 A A2 A1 b e K c L E D E1 PIN 1 IDENTIFICATION 1 7/8 74LVQ14 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics 1999 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. http://www.st.com . 8/8