STMICROELECTRONICS BYT08PI-1000

BYT 08PI-1000
®
FAST RECOVERY RECTIFIER DIODE
VERY HIGH REVERSE VOLTAGE CAPABILITY
VERY LOW REVERSE RECOVERY TIME
VERY LOW SWITCHING LOSSES
LOW NOISE TURN-OFF SWITCHING
INSULATED: Capacitance 7pF
Insulting voltage 2500 VRMS
A
K
SUITABLE APPLICATIONS
FREE WHEELING DIODE IN CONVERTERS
AND MOTOR CONTROL CIRCUITS
RECTIFIER IN S.M.P.S.
Isolated
TO220AC
(Plastic)
ABSOLUTE MAXIMUM RATINGS (limiting values)
Symbol
Parameter
Value
Unit
VRRM
Repetitive Peak Reverse Voltage
1000
V
VRSM
Non Repetitive Peak Reverse Voltage
1000
V
IFRM
Repetitive Peak Forward Current
100
A
16
A
IF (RMS)
tp ≤ 10µs
RMS Forward Current
IF (AV)
Average Forward Current
Tc = 80°C
δ = 0.5
8
A
IFSM
Surge Non Repetitive Forward Current
tp = 10ms
Sinusoidal
50
A
Power Dissipation
Tc = 80°C
17
W
- 40 to + 150
- 40 to + 150
°C
Value
Unit
4
°C/W
P
Tstg
Tj
Storage and Junction Temperature Range
THERMAL RESISTANCE
Symbol
Rth (j - c)
October 1999
Parameter
Junction-case
1/4
BYT 08PI-1000
ELECTRICAL CHARACTERISTICS
STATIC CHARACTERISTICS
Synbol
IR
Test Conditions
Min.
Typ.
VR = VRRM
Tj = 25°C
Tj = 100°C
VF
IF = 8A
Tj = 25°C
Max.
Unit
35
µA
2
mA
1.9
V
1.8
Tj = 100°C
RECOVERY CHARACTERISTICS
Symbol
trr
Test Conditions
Tj = 25°C
Min.
Typ.
Max.
Unit
ns
IF = 1A
diF/dt = - 15A/µs
VR = 30V
155
IF = 0.5A
IR = 1A
Irr = 0.25A
65
TURN-OFF SWITCHING CHARACTERISTICS (Without Series Inductance)
Symbol
tIRM
Test Conditions
diF/dt = - 32A/µs
diF/dt = - 64A/µs
IRM
Min.
VCC = 200 V IF = 8A
Lp ≤ 0.05µH Tj = 100°C
See Figure 1
Typ.
Max.
Unit
200
ns
5.5
A
120
diF/dt = - 32A/µs
6
diF/dt = - 64A/µs
TURN-OFF OVERVOLTAGE COEFFICIENT (With Series Inductance)
Symbol
C=
VRP
VCC
Test Conditions
Tj = 100°C
diF/dt = - 8A/µs
VCC = 200V
Lp = 2µH
IF = IF (AV)
See figure 2
To evaluate the conduction losses use the following equation:
VF = 1.47 + 0.04 IF
P = 1.47 x IF(AV) + 0.04 IF2(RMS)
2/4
Min.
Typ.
Max.
4.5
Unit
BYT 08PI-1000
Figure 1. Turn-off switching characteristics (without series inductance).
Figure 2. Turn-off switching characteristics (with series inductance).
3/4
BYT 08PI-1000
PACKAGE MECHANICAL DATA : TO220AC Plastic
B
C
b2
L
F
I
A
l4
c2
a1
l2
a2
b1
M
c1
DIMENSIONS
REF.
Millimeters
Inches
Min. Typ. Max. Min. Typ. Max.
A 15.20
15.90 0.598
0.625
a1
3.75
0.147
a2 13.00
14.00 0.511
0.551
B 10.00
10.40 0.393
0.409
b1
0.61
0.88 0.024
0.034
b2
1.23
1.32 0.048
0.051
C
4.40
4.60 0.173
0.181
c1
0.49
0.70 0.019
0.027
c2
2.40
2.72 0.094
0.107
e
4.80
5.40 0.189
0.212
F
6.20
6.60 0.244
0.259
I
3.75
3.85 0.147
0.151
I4 15.80 16.40 16.80 0.622 0.646 0.661
L
2.65
2.95 0.104
0.116
l2
1.14
1.70 0.044
0.066
M
2.60
0.102
e
Cooling method: by conduction (method C)
Marking: type number
Weight: 2.1g
Recommended torque value: 80cm. N
Maximum torque value: 100cm. N
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of
use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to
change without notice. This publication supersedes and replaces all information previously supplied.
STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval
of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
© 1999 STMicroelectronics - Printed in Italy - All rights reserved.
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia
Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A.
http://www.st.com
4/4