STMICROELECTRONICS STGD5NB120SZT4

STGD5NB120SZ-1
STGD5NB120SZ
N-CHANNEL 5A - 1200V DPAK/IPAK
INTERNALLY CLAMPED PowerMESH™ IGBT
Table 1: General Features
Figure 1: Package
TYPE
VCES
VCE(sat)
IC
STGD5NB120SZ
STGD5NB120SZ-1
1200 V
1200 V
< 2.0 V
< 2.0 V
5A
5A
■
■
■
■
■
HIGH INPUT IMPEDANCE (VOLTAGE
DRIVEN)
LOW ON-VOLTAGE DROP (Vcesat)
HIGHT CURRENT CAPABILITY
OFF LOSSES INCLUDE TAIL CURRENT
HIGH VOLTAGE CLAMPING FEATURES
DESCRIPTION
Using the latest high voltage technology based on
a patented strip layout, STMicroelectronics has
designed an advanced family of IGBTs, the PowerMESH™ IGBTs, with outstanding performances.
The suffix “S” identifies a family optimized achieve
minimum on-voltage drop for low frequency applications (<1kHz). The built in collector-gate zener
exibits a very precise active clamping.
3
3
2
1
DPAK
1
IPAK
Figure 2: Internal Schematic Diagram
APPLICATIONS
LIGHT DIMMER
■ INRUSH CURRENT LIMITATION
■ PRE-HEATING FOR ELECTRONIC LAMP
BALLAST
■
Table 2: Order Code
PART NUMBER
MARKING
PACKAGE
PACKAGING
STGD5NB120SZT4
GD5NB120SZ
DPAK
TAPE & REEL
STGD5NB120SZ-1
GD5NB120SZ
IPAK
TUBE
Rev. 2
January 2005
1/13
STGD5NB120SZ-1 - STGD5NB120SZ
Table 3: Absolute Maximum ratings
Symbol
Parameter
Value
Unit
1200
V
VCES
Collector-Emitter Voltage (VGS = 0)
VECR
Emitter-Collector Voltage
20
V
VGE
Gate-Emitter Voltage
±20
V
IC
Collector Current (continuous) at TC = 25°C
10
A
IC
Collector Current (continuous) at TC = 100°C
5
A
Collector Current (pulsed)
20
A
ICM ()
PTOT
Total Dissipation at TC = 25°C
Derating Factor
Eas (1)
Tstg
Tj
Single Pulse Avalanche Energy at Tj = 25°C
Single Pulse Avalanche Energy at Tj = 100°C
Storage Temperature
Operating Junction Temperature range
55
W
0.44
W/°C
10
7
mJ
mJ
–55 to 150
°C
150
°C
() Pulse width limited by safe operating area
(1) VCE = 50 V , IAV = 3.3 A
Table 4: Thermal Data
Min.
Typ.
Max.
Rthj-case
Thermal Resistance Junction-case
2.27
°C/W
Rthj-amb
Thermal Resistance Junction-ambient
100
°C/W
Max.
Unit
ELECTRICAL CHARACTERISTICS (TCASE =25°C UNLESS OTHERWISE SPECIFIED)
Table 5: On/Off
Symbol
Parameter
VBR(CES)
Collector-Emitter Breakdown
Voltage
IC = 10 mA, VGE = 0 V
ICES
Collector cut-off Current
(VGE = 0)
VCE = 900 V
VCE = 900 V, Tj = 125 °C
50
250
µA
µA
IGES
Gate-Emitter Leakage
Current (VCE = 0)
VGE = ±20V , VCE = 0 V
±100
nA
Gate Threshold Voltage
VCE = VGE, IC = 250 µA
5
V
Gate Emitter Voltage
VCE =2.5 V, IC = 2 A,
Tj = 25÷125°C
6.5
V
Collector-Emitter Saturation
Voltage
VGE = 15V, IC = 5 A
VGE = 15V, IC = 5 A, Tj =125°C
2.0
V
V
VGE(th)
VGE
VCE(sat)
2/13
Test Conditions
Min.
Typ.
1200
V
2
1.3
1.2
STGD5NB120SZ-1 - STGD5NB120SZ
ELECTRICAL CHARACTERISTICS (CONTINUED)
Table 6: Dynamic
Symbol
Parameter
Test Conditions
Forward Transconductance
VCE = 25 V , IC = 5 A
Cies(*)
Input Capacitance
VCE = 25V, f = 1 MHz, VGE = 0V
Coes(*)
Output Capacitance
Cres(*)
Rg
gfs
Min.
Typ.
Max.
Unit
5
S
430
pF
40
pF
Reverse Transfer
Capacitance
7
pF
Gate Resistance
4
KΩ
(1) Pulsed: Pulse duration= 300 µs, duty cycle 1.5%
Table 7: Switching On
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Unit
td(on)
tr
(di/dt)on
Delay Time
Current Rise Time
Turn-on Current Slope
IC = 5 A , VCC = 960 V
VGE = 15 V , Rdrive = 1KΩ
Tj = 25°C
690
170
39.6
ns
ns
A/µs
td(on)
tr
(di/dt)on
Dealy Time
Current Rise Time
Turn-on Current Slope
ICC = 5 A , VCC = 960 V
VGE = 15 V , Rdrive = 1KΩ
Tj = 125°C
600
185
39
ns
ns
A/µs
Table 8: Switching Off
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Unit
tc
tr(Voff)
td(off)
tf
Cross-over Time
Off Voltage Rise Time
Delay Time
Current Fall Time
IC = 5 A , VCC = 960 V
VGE = 15 V , Rdrive = 1KΩ
Tj = 25°C
4
2.2
12.1
1.13
µs
µs
µs
µs
tc
tr(Voff)
td(off)
tf
Cross-over Time
Off Voltage Rise Time
Delay Time
Current Fall Time
IC = 5 A , VCC = 960 V
VGE = 15 V , Rdrive = 1KΩ
Tj = 125°C
5
2.2
12.1
2
µs
µs
µs
µs
Table 9: Switching Energy
Symbol
Parameterr
Test Conditions
Min.
Typ.
Max
Unit
Eon (2)
Eoff (3)
Ets
Turn-on Switching Losses
Turn-off Switching Loss
Total Switching Loss
VCC = 800 V, IC = 3 A
RG= 10 Ω, VGE= 15V, Tj= 25°C
(see Figure 18)
2.59
9
11.59
mJ
mJ
mJ
Eon (2)
Eoff (3)
Ets
Turn-on Switching Losses
Turn-off Switching Loss
Total Switching Loss
VCC = 800 V, IC = 3 A
RG= 10 Ω, VGE= 15V, Tj= 125°C
(see Figure 18)
2.64
10.2
12.68
mJ
mJ
mJ
(2) Eon is the turn-on losses when a typical diode is used in the test circuit in figure 2.
(3) Turn-off losses include also the tail of the collector current.
3/13
STGD5NB120SZ-1 - STGD5NB120SZ
Table 10: Functional Test
Symbol
Parameterr
Ias
Unclamped inductive switching
current
VCC = 50 V, L= 1.8 mH
Tstart = 25°C, Rdrive = 1KΩ
ICL
Latching Current
VCLAMP = 960 V, Tj =125°C
Rdrive = 1KΩ
4/13
Test Conditions
Min.
Typ.
3.3
Max
Unit
A
10
A
STGD5NB120SZ-1 - STGD5NB120SZ
Figure 3: Output Characteristics
Figure 6: Transfer Characteristics
Figure 4: Transconductance
Figure 7: Collector-Emitter On Voltage vs Temperature
Figure 5: Collector-Emitter On Voltage vs Collector Current
Figure 8: Normalized Gate Threshold vs Temperature
5/13
STGD5NB120SZ-1 - STGD5NB120SZ
Figure 9: Gate Threshold vs Temperature
Figure 12: Breakdown Voltage vs Temperature
Figure 10: Capacitance Variations
Figure 13: Gate-Charge vs Gate-Emitter Voltage
Figure 11: Switching Losses vs Gate Resistance
Figure 14: Switching Losses vs Collector Current
6/13
STGD5NB120SZ-1 - STGD5NB120SZ
Figure 15: Thermal Impedance
Figure 16: Turn-Off SOA
7/13
STGD5NB120SZ-1 - STGD5NB120SZ
Figure 17: Test Circuit for Inductive Load
Switching
Figure 19: Gate Charge Test Circuit
Figure 18: Switching Waveforms
Figure 20: Diode Recovery Time Waveforms
8/13
STGD5NB120SZ-1 - STGD5NB120SZ
TO-252 (DPAK) MECHANICAL DATA
mm
DIM.
MIN.
TYP.
inch
MAX.
MIN.
TYP.
MAX.
A
2.20
2.40
0.087
0.094
A1
0.90
1.10
0.035
0.043
A2
0.03
0.23
0.001
0.009
B
0.64
0.90
0.025
0.035
B2
5.20
5.40
0.204
0.213
C
0.45
0.60
0.018
0.024
C2
0.48
0.60
0.019
0.024
D
6.00
6.20
0.236
0.244
E
6.40
6.60
0.252
0.260
G
4.40
4.60
0.173
0.181
H
9.35
10.10
0.368
L2
L4
V2
0.8
0.60
0
o
0.398
0.031
1.00
8
o
0.024
0
o
0.039
0o
P032P_B
9/13
STGD5NB120SZ-1 - STGD5NB120SZ
TO-251 (IPAK) MECHANICAL DATA
mm
DIM.
MIN.
A
inch
TYP.
2.2
MAX.
MIN.
2.4
0.086
TYP.
MAX.
0.094
A1
0.9
1.1
0.035
0.043
A3
0.7
1.3
0.027
0.051
B
0.64
0.9
0.025
0.031
B2
5.2
5.4
0.204
0.212
B3
0.85
B5
0.033
0.3
0.012
B6
0.95
C
0.45
C2
0.48
D
6
0.037
0.6
0.017
0.023
0.6
0.019
0.023
6.2
0.236
0.244
0.260
E
6.4
6.6
0.252
G
4.4
4.6
0.173
0.181
H
15.9
16.3
0.626
0.641
L
9
9.4
0.354
0.370
L1
0.8
1.2
0.031
0.047
L2
0.8
1
0.031
0.039
A1
C2
A3
A
C
H
B
B3
=
1
=
2
G
=
=
=
E
B2
=
3
B5
L
D
B6
L2
L1
0068771-E
10/13
STGD5NB120SZ-1 - STGD5NB120SZ
DPAK FOOTPRINT
TUBE SHIPMENT (no suffix)*
All dimensions
are in millimeters
All dimensions are in millimeters
TAPE AND REEL SHIPMENT (suffix ”T4”)*
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
16.4
N
50
T
TAPE MECHANICAL DATA
DIM.
mm
MIN.
inch
MAX.
MIN.
A0
6.8
7
0.267 0.275
10.4
10.6
0.409 0.417
D
1.5
12.1
0.476
1.6
0.059 0.063
D1
1.5
E
1.65
1.85
F
7.4
7.6
0.291 0.299
K0
2.55
2.75
0.100 0.108
P0
3.9
4.1
0.153 0.161
P1
7.9
8.1
0.311 0.319
P2
1.9
2.1
0.075 0.082
R
40
W
15.7
MIN.
MAX.
330
12.992
13.2
0.504 0.520
18.4
0.645 0.724
0.059
0.795
1.968
22.4
0.881
BASE QTY
BULK QTY
2500
2500
MAX.
B0
B1
inch
MAX.
0.059
0.065 0.073
1.574
16.3
0.618
0.641
* on sales type
11/13
STGD5NB120SZ-1 - STGD5NB120SZ
Table 11: Revision History
Date
Revision
06-Oct-2003
18-Jan-2005
1
2
12/13
Description of Changes
First release
Final datasheet
STGD5NB120SZ-1 - STGD5NB120SZ
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
All other names are the property of their respective owners
© 2005 STMicroelectronics - All Rights Reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
13/13