VISHAY 1N1188RA

1N1183, 1N3765, 1N1183A, 1N2128A Series
www.vishay.com
Vishay Semiconductors
Power Silicon Rectifier Diodes,
35 A, 40 A, 60 A
DESCRIPTION/FEATURES
• Low leakage current series
• Good surge current capability up to 1000 A
• Can be supplied to meet stringent military,
aerospace, and other high reliability
requirements
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DO-203AB (DO-5)
PRODUCT SUMMARY
IF(AV)
35 A, 40 A, 60 A






MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
IF(AV)
IFSM
I2t
I2t
VRRM
TEST CONDITIONS
TC
50 Hz
60 Hz
50 Hz
60 Hz
Range
1N1183
35 (1)
140 (1)
480
500 (1)
1140
1040
16 100
50 to 600 (1)
1N3765
35 (1)
140 (1)
380
400 (1)
730
670
10 300
700 to 1000 (1)
1N1183A
40 (1)
150 (1)
765
800 (1)
2900
2650
41 000
50 to 600 (1)
1N2128A
60 (1)
140 (1)
860
900 (1)
3700
3400
52 500
50 to 600 (1)
UNITS
A
°C
A
A2s
A2s
V
Note
(1) JEDEC registered values
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
TYPE NUMBER
1N1183
1N1184
1N1185
1N1186
1N1187
1N1188
1N1189
1N1190
1N3765
1N3766
1N3767
1N3768
1N1183A
1N1184A
1N1185A
1N1186A
1N1187A
1N1188A
1N1189A
1N1190A
1N2128A
1N2129A
1N2130A
1N2131A
1N2133A
1N2135A
1N2137A
1N2138A
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
(TJ = - 65 °C TO 200 °C (2))
V
VRM, MAXIMUM DIRECT
REVERSE VOLTAGE
(TJ = - 65 °C TO 200 °C (2))
V
50 (1)
100 (1)
150 (1)
200 (1)
300 (1)
400 (1)
500 (1)
600 (1)
700 (1)
800 (1)
900 (1)
1000 (1)
50 (1)
100 (1)
150 (1)
200 (1)
300 (1)
400 (1)
500 (1)
600 (1)
700 (1)
800 (1)
900 (1)
1000 (1)
Notes
(1) JEDEC registered values
(2) For 1N1183 Series and 1N3765 Series T = - 65 °C to 190 °C
C
• Basic type number indicates cathode to case. For anode to case, add “R” to part number, e.g., 1N1188R, 1N3766R, 1N1186RA, 1N2135RA
Revision: 04-Dec-12
Document Number: 93492
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1N1183, 1N3765, 1N1183A, 1N2128A Series
www.vishay.com
Vishay Semiconductors
FORWARD CONDUCTION
PARAMETER
SYMBOL
Maximum average forward current 
at case temperature
IF(AV)
TEST CONDITIONS
1-phase operation, 
180° sinusoidal conduction
Half cycle 50 Hz
sine wave or 6 ms
rectangular pulse
Maximum peak one cycle
non-repetitive surge current
IFSM
Half cycle 60 Hz
sine wave or 5 ms
rectangular pulse
Half cycle 50 Hz
sine wave or 6 ms
rectangular pulse
Half cycle 60 Hz
sine wave or 5 ms
rectangular pulse
t = 10 ms
Maximum
I2t
for fusing
t = 8.3 ms
I2t
t = 10 ms
Maximum I2t for individual
device fusing
Maximum I2t for individual
device fusing
Maximum peak forward voltage
at maximum forward current (IFM)
t = 8.3 ms
I2t (2)
VFM
Following any
rated load
condition and
with rated
VRRM applied
140
(1)
35 (1)
140
(1)
40 (1)
150
(1)
60 (1)
140
(1)
380
765
860
500 (1)
400 (1)
800 (1)
900 (1)
A
°C
With rated VRRM
applied following
surge, initial
TJ = TJ maximum
With VRRM = 0
following surge,
initial 
TJ = TJ maximum
t = 0.1 to 10 ms, 
VRRM = 0 following surge
TJ = 25 °C
570
455
910
1000
595
475
950
1050
1140
730
2900
3700
1040
670
2650
3400
1610
1030
4150
5250
1470
940
3750
4750
16 100
10 300
41 500
52 500
A2s
1.7 (1)
1.8 (1)
1.3 (1)
1.3 (1)
V
110
110
A
A2s
126
188
5.0
(1)
-
-
4.0
(1)
-
-
-
3.0
(1)
-
-
-
2.0 (1)
-
-
10 (1)
-
2.5 (1)
10 (1)
IR(AV)
1N3765 1N1183A 1N2128A UNITS
480
-
VRRM = 800
VRRM = 900
35
(1)
A
Following any
rated load
condition and
with ½ VRRM
applied following
surge = 0
VRRM = 700
Maximum average
reverse current
1N1183
Maximum rated IF(AV) and TC
VRRM = 1000
Maximum rated IF(AV), VRRM and TC
mA
Notes
(1) JEDEC registered values
(2) I2t for time t = I2t x t
x
x
Revision: 04-Dec-12
Document Number: 93492
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1N1183, 1N3765, 1N1183A, 1N2128A Series
www.vishay.com
Vishay Semiconductors
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
Maximum operating
case temperature range
SYMBOL
TEST CONDITIONS
1N1183 1N3765 1N1183A 1N2128A UNITS
TC
- 65 to 190 (1)
- 65 to 200
Maximum storage
temperature range
TStg
- 65 to 175 (1)
- 65 to 200
Maximum internal thermal
resistance, junction to case
RthJC
DC operation
Thermal resistance,
case to sink
RthCS
Mounting surface, smooth, flat and greased
°C
1.00 (1)
Lubricated thread, tighting on nut
(2)
0.25
3.4 (30)
2.3 (20)
Not lubricated thread, tighting on hexagon (3)
4.2 (37)
Lubricated thread, tighting on hexagon (3)
3.2 (28)
Approximate weight
Case style
0.65 (1)
°C/W
Not lubricated thread, tighting on nut (2)
Maximum allowable
mounting torque
(+ 0 %, - 10 %)
1.1 (1)
JEDEC
N·m
(lbf · in)
17
g
0.6
oz.
DO-203AB (DO-5)
Notes
(1) JEDEC registered values
(2) Recommended for pass-through holes
(3) Recommended for holed threaded heatsinks
Fig. 1 - Maximum Allowable Case Temperature vs.
Average Forward Current, 1N1183 and 1N3765 Series
Revision: 04-Dec-12
Fig. 2 - Typical Low Level Forward Power Loss vs.
Average Forward Current (Sinusoidal Current Waveform),
1N1183 and 1N3765 Series
Document Number: 93492
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1N1183, 1N3765, 1N1183A, 1N2128A Series
www.vishay.com
Fig. 3 - Typical High Level Forward Power Loss vs.
Average Forward Current (Sinusoidal Current Waveform),
1N1183 and 1N3765 Series
Fig. 4 - Typical Forward Voltage vs. Forward Current,
1N1183 and 1N3765 Series
Fig. 5 - Maximum Non-Repetitive Surge Current vs.
Number of Current Pulses, 1N1183 and 1N3765 Series
Revision: 04-Dec-12
Vishay Semiconductors
Fig. 6 - Average Forward Current vs. Maximum Allowable Case
Temperature, 1N1183A Series
Fig. 7 - Maximum Low Level Forward Power Loss vs.
Average Forward Current, 1N1183A Series
Fig. 8 - Maximum High Level Forward Power Loss vs.
Average Forward Current, 1N1183A Series
Document Number: 93492
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1N1183, 1N3765, 1N1183A, 1N2128A Series
www.vishay.com
Vishay Semiconductors
Fig. 9 - Maximum Forward Voltage vs. Forward Current,
1N1183A Series
Fig. 12 - Maximum Allowable Case Temperature vs.
Average Forward Current, 1N2128A Series
Fig. 10 - Maximum Non-Repetitive Surge Current vs.
Number of Current Pulses, 1N1183A Series
Fig. 13 - Maximum Low Level Forward Power Loss vs.
Average Forward Current, 1N2128A Series
Fig. 11 - Maximum Non-Repetitive Surge Current vs.
Number of Current Pulses, 1N2128A Series
Fig. 14 - Maximum High Level Forward Power Loss vs.
Average Forward Current, 1N2128A Series
Revision: 04-Dec-12
Document Number: 93492
5
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1N1183, 1N3765, 1N1183A, 1N2128A Series
www.vishay.com
Vishay Semiconductors
Fig. 15 - Maximum Forward Voltage vs. Forward Current,
1N2128A Series
LINKS TO RELATED DOCUMENTS
Dimensions
Revision: 04-Dec-12
www.vishay.com/doc?95360
Document Number: 93492
6
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
Vishay Semiconductors
DO-203AB (DO-5) for
1N1183, 1N3765, 1N1183A, 1N2128A, 1N3208 Series
DIMENSIONS in millimeters (inches)
Ø 14.6 (0.57)
6.1 (0.24)
7.0 (0.28)
Ø 4.10 (0.16)
Ø 3.80 (0.15)
1.03 (0.04)
MAX.
4 (0.16) MIN.
25.4 (1.0) MAX.
10.8 (0.43)
11.4 (0.45)
10.7 (0.42)
11.5 (0.45)
1/4" 28UNF-2A
for metric devices: M6 x 1
1.0 (0.04)
MAX.
Document Number: 95360
Revision: 29-Sep-08
17.40 (0.68) MIN.
Across flats
For technical questions, contact: [email protected]
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000