STP8NM60 - STP8NM60FP STB8NM60 - STD5NM60 - STD5NM60-1 N-CHANNEL [email protected]Ω-8A TO-220/FP/D/IPAK/D²PAK STripFET™ II MOSFET Table 1: General Features TYPE STP8NM60 STP8NM60FP STD5NM60 STD5NM60-1 STB8NM60 ■ ■ ■ ■ ■ VDSS 650 V 650 V 650 V 650 V 650 V Figure 1: Package RDS(on) < < < < < 1Ω 1Ω 1Ω 1Ω 1Ω ID Pw 8A 8 A(*) 5A 5A 5A 100 W 30 W 96 W 96 W 96 W TYPICAL RDS(on) = 0.9Ω HIGH dv/dt AND AVALANCHE CAPABILITIES 100% AVALANCHE TESTED LOW INPUT CAPACITANCE AND GATE CHARGE LOW GATE INPUT RESISTANCE 3 1 TO-220 2 TO-220FP 3 1 D²PAK 3 3 1 2 1 DPAK DESCRIPTION The MDmesh™ is a new revolutionary MOSFET technology that associates the Multiple Drain process with the Company’s PowerMESH™ horizontal layout. The resulting product has an outstanding low on-resistance, impressively high dv/dt and excellent avalanche characteristics. The adoption of the Company’s proprietary strip technique yields overall dynamic performance that is significantly better than that of similar completition’s products. IPAK Figure 2: Internal Schematic Diagram APPLICATIONS The MDmesh™ family is very suitable for increase the power density of high voltage converters allowing system miniaturization and higher efficiencies. Table 2: Order Codes Sales Type Marking Package Packaging STP8NM60 P8NM60 TO-220 TUBE STP8NM60FP P8NM60FP TO-220FP TUBE STD5NM60 D5NM60 DPAK TAPE & REEL STD5NM60-1 D5NM60 IPAK TUBE STB8NM60 B8NM60 D²PAK TAPE & REEL Rev. 2 April 2005 1/16 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1- STB8NM60 Table 3: Absolute Maximum ratings Symbol Parameter Value TO-220/D²PAK VGS Gate- source Voltage TO-220FP Unit DPAK/IPAK ± 30 V ID Drain Current (continuous) at TC = 25°C 8 8 (*) 5 A ID Drain Current (continuous) at TC = 100°C 5 5 (*) 3.1 A Drain Current (pulsed) 32 32 (*) 20 A Total Dissipation at TC = 25°C 100 30 96 W Derating Factor 0.8 0.24 0.4 W/°C Peak Diode Recovery voltage slope 15 15 15 V/ns - 2500 - V IDM () PTOT dv/dt (1) VISO Insulation Withstand Voltage (DC) Tj Tstg Operating Junction Temperature Storage Temperature -55 to 150 °C () Pulse width limited by safe operating area (1) ISD ≤ 5A, di/dt ≤ 400A/µs, VDD ≤ V(BR)DSS, Tj ≤ TJMAX. (*) Limited only by maximum temperature allowed Table 4: Thermal Data TO-220/D²PAK TO-220FP DPAK/IPAK 1.25 4.16 1.3 Rthj-case Thermal Resistance Junction-case Max °C/W Rthj-amb Thermal Resistance Junction-ambient Max 62.5 °C/W Tl Maximum Lead Temperature For Soldering Purpose 300 °C Table 5: Avalanche Characteristics Symbol Max Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) Parameter 2.5 A EAS Single Pulse Avalanche Energy (starting Tj = 25 °C, ID = IAR, VDD = 50 V) 200 mJ ELECTRICAL CHARACTERISTICS (TCASE =25°C UNLESS OTHERWISE SPECIFIED) Table 6: On/Off Symbol Parameter V(BR)DSS Drain-source Breakdown Voltage ID = 250 µA, VGS = 0 IDSS Zero Gate Voltage Drain Current (VGS = 0) VDS = Max Rating VDS = Max Rating, TC = 125 °C IGSS Gate-body Leakage VGS = ± 30V Current (VDS = 0) VGS(th) RDS(on) 2/16 Gate Threshold Voltage Static Drain-source On Resistance Test Conditions VDS = VGS, ID = 250µA VGS = 10V, ID = 2.5 A Min. Typ. Max. 600 3 Unit V 1 10 µA µA ±100 nA 4 5 V 0.9 1 Ω STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1 - STB8NM60 - STB8NM60 ELECTRICAL CHARACTERISTICS (CONTINUED) Table 7: Dynamic Symbol gfs Ciss Coss Crss Coss eq. (2) Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions Min. VDS = ID(on) x RDS(on)max, ID = 2.5A VDS = 25V, f = 1 MHz, VGS = 0 Typ. Max. Unit 2.4 S 440 100 10 pF pF pF Equivalent Output Capacitance VGS = 0V, VDS = 0V to 480V 50 pF td(on) tr Turn-on Delay Time Rise Time VDD = 300 V, ID = 2.5 A RG = 4.7Ω VGS = 10 V (Resistive Load see, Figure 3) 14 10 ns ns Qg Qgs Qgd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD = 400V, ID = 5 A, VGS = 10V 13 5 6 18 nC nC nC Typ. Max. Unit Table 8: Switching On/Off Symbol Parameter Test Conditions Min. td(off) tf Turn-off Delay Time Fall Time VDD = 300 V, ID = 2.5 A RG = 4.7Ω VGS = 10 V (Resistive Load see, Figure 3) 23 10 ns ns tr(Voff) tf tc Off-voltage Rise Time Fall Time Cross-over Time VDD = 480V, ID = 5 A, RG = 4.7Ω, VGS = 10V (Inductive Load see, Figure 5) 7 10 17 ns ns ns Table 9: Source Drain Diode Symbol Parameter ISD ISDM () Source-drain Current Source-drain Current (pulsed) VSD (2) Forward On Voltage ISD = 5 A, VGS = 0 Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 5 A, di/dt = 100A/µs VDD = 100 V, Tj = 25°C (see test circuit, Figure 5) 300 1950 13 ns µC A Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 5 A, di/dt = 100A/µs VDD = 100 V, Tj = 150°C (see test circuit, Figure 5) 445 3005 13.5 ns µC A trr Qrr IRRM trr Qrr IRRM Test Conditions Min. Typ. Max. Unit 8 32 A A 1.5 V (2) Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. 3/16 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1- STB8NM60 Figure 3: Safe Operating Area for TO-220/ D²PAK Figure 6: Thermal Impedance for TO-220/ D²PAK Figure 4: Safe Operating Area for TO-220FP Figure 7: Thermal Impedance for TO-220FP Figure 5: Safe Operating Area for DPAK/IPAK Figure 8: Thermal Impedance for DPAK/IPAK 4/16 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1 - STB8NM60 - STB8NM60 Figure 9: Output Characteristics Figure 12: Transfer Characteristics Figure 10: Transconductance Figure 13: Static Drain-Source on Resistance Figure 11: Gate Charge vs Gate source Voltage Figure 14: Capacitance Variations 5/16 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1- STB8NM60 Figure 15: Normalized Gate Thereshold Voltage vs Temperature j Figure 16: Source Drain Diode Forward Characteristics 6/16 Figure 17: Normalized on Resistance vs Temperature STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1 - STB8NM60 - STB8NM60 Figure 18: Unclamped Inductive Load Test Circuit Figure 21: Unclamped Inductive Wafeform Figure 19: Switching Times Test Circuit For Resistive Load Figure 22: Gate Charge Test Circuit Figure 20: Test Circuit For Inductive Load Switching and Diode Recovery Times 7/16 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1- STB8NM60 TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 8/16 TYP 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1 - STB8NM60 - STB8NM60 TO-220FP MECHANICAL DATA mm. DIM. MIN. A 4.4 inch TYP MAX. MIN. TYP. 4.6 0.173 0.181 MAX. 0.106 B 2.5 2.7 0.098 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 B D A E L7 L3 L6 F2 H G G1 F F1 L7 L2 L5 1 2 3 L4 9/16 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1- STB8NM60 TO-251 (IPAK) MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 2.2 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A3 0.7 1.3 0.027 0.051 B 0.64 0.9 0.025 0.031 B2 5.2 5.4 0.204 0.212 B3 0.85 B5 0.033 0.3 0.012 B6 0.95 C 0.45 C2 0.48 D 6 E 6.4 6.6 0.037 0.6 0.017 0.023 0.6 0.019 0.023 6.2 0.236 0.244 0.252 0.260 G 4.4 4.6 0.173 0.181 H 15.9 16.3 0.626 0.641 L 9 9.4 0.354 0.370 L1 0.8 1.2 0.031 0.047 L2 0.8 1 0.031 0.039 A1 C2 A3 A C H B B3 = 1 = 2 G = = = E B2 = 3 B5 L D B6 L2 L1 0068771-E 10/16 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1 - STB8NM60 - STB8NM60 TO-252 (DPAK) MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. A 2.20 2.40 0.087 TYP. 0.094 MAX. A1 0.90 1.10 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.90 0.025 0.035 B2 5.20 5.40 0.204 0.213 C 0.45 0.60 0.018 0.024 C2 0.48 0.60 0.019 0.024 D 6.00 6.20 0.236 0.244 E 6.40 6.60 0.252 0.260 G 4.40 4.60 0.173 0.181 H 9.35 10.10 0.368 0.398 L2 0.8 0.031 L4 0.60 1.00 0.024 0.039 V2 0o 8o 0o 0o P032P_B 11/16 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1- STB8NM60 DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B DIM. mm MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 B1 12/16 inch D 1.5 D1 1.5 E 1.65 MIN. MAX. 0.059 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 W 15.7 1.574 16.3 0.618 0.641 MIN. 330 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA inch MAX. MAX. 12.992 0.059 13.2 0.504 0.520 18.4 0.645 0.724 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1 - STB8NM60 - STB8NM60 D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 D1 E 8 10 E1 0.315 10.4 0.393 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 R 0º 0.126 0.015 4º 3 V2 0.4 1 13/16 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1- STB8NM60 D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B DIM. mm MIN. MAX. MIN. MAX. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 R 50 0.075 0.082 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 * on sales type 14/16 inch 0.933 0.956 MIN. 330 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA inch MAX. MAX. 12.992 0.059 13.2 0.504 0.520 26.4 0.960 1.039 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1 - STB8NM60 - STB8NM60 Table 10: Revision History Date Revision 11-Apr-2005 2 Description of Changes Inserted D²PAK. 15/16 STP8NM60 - STP8NM60FP - STD5NM60 - STD5NM60-1- STB8NM60 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners © 2005 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America 16/16