MURF1620CT Dual Ultrafast Plastic Rectifiers ITO-220AB PRV : 200 Volts Io : 16 Ampere 0.134(3.4)DIA. 0.113(3.0)DIA. FEATURES : 0.112(2.85) 0.100(2.55) 0.185(4.70)Max. 0.406(10.3)MAX. 0.124(3.16)Max. 0.272(6.9) 0.248(6.3) * Ideally suited for free wheeling diode power factor 0.603(15.5) 0.573(14.8) correction applications * Soft recovery characteristics 1 2 3 * Excellent high temperature switching * Glass passivated chip junction 0.110(2.8) 0.098(2.5) 0.161(4.1)Max. 0.543(13.8) 0.512(13.2) 0.055(1.4)Max. * Pb / RoHS Free 0.035(0.9)Max. 0.030(0.76)Max. MECHANICAL DATA : 0.100(2.55) * Case : Epoxy, Molded * Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds * Polarity: As marked * Mounting Position: Any * Weight : 2.24 grams (Approximately) PIN 1 PIN 3 PIN 2 Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Tc =25°C unless otherwise specified.) RATING SYMBOL VALUE UNIT Maximum Repetitive Peak Reverse Voltage VRRM 200 V Maximum Working Peak Reverse Voltage VRWM 200 V Maximum DC Blocking Voltage VDC 200 V Maximum Average Forward Current, Tc = 100°C IF(AV) 8.0 A 16 (Total Device) Maximum Non−repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, IFSM 100 A VF 0.975 V IR 5.0 (Tc = 25°C) µA IR(H) 250 (Tc = 100°C) µA Trr 25 ns RθJC 4.2 °C/W TJ, TSTG - 65 to + 150 °C single phase, 60 Hz) Maximum Instantaneous Forward Voltage per Leg at IF = 8 A, Tc = 25°C IF = 8 A, Tc = 150°C Maximum Instantaneous Reverse Current (Rated dc Voltage) Maximum Reverse Recovery Time (IF = 0.5A, IR = 1.0A, Irr = 0.25A ) Maximum Thermal Resistance, Junction to Case Operating storage and temperature range Page 1 of 2 0.895 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( MURF1620CT ) FIG.1 - MAXIMUM FORWARD CURRENT DERATING CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 150 Tj =150 °C Resistive or Inductive Load PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 12 10 8 6 4 100 75 50 25 2 0 125 0 25 50 75 100 125 150 0 175 1 2 CASE TEMPERATURE, ( °C) FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 20 40 60 100 CHARACTERISTICS 1 TJ = 25 °C 0.6 Pulse Width = 300 µs 2% Duty Cycle 0.8 1.0 1.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS Page 2 of 2 10 1000 10 0.01 0.4 6 FIG. 4 - TYPICAL REVERSE LEAKAGE 100 0.1 4 NUMBER OF CYCLES AT 60Hz 1.4 TJ = 100 °C 100 10 TJ = 25 °C 1 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) Rev. 02 : March 25, 2005