MINIATURE RELAY (SURFACE MOUNT TYPE) 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) FBR18 SERIES N OT ■ FEATURES ● ● ● ● ● ● FO D R ES FB NE IG BE R1 W N 8 S ND DI SC /H ON D T EX T O IN C EP FB IE D T R1 8W D 2 form C small size,surface mounting relay. Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom relay. UL, CSA recognized. High dielectric and surge strength: 2.5 KV surge (per Bellcore TA-NWT-001089) 1.5 KV surge (per FCC part 68) 1,000 Vrms, open contacts Low power consumption: 80 mW operate 140 mW nominal Tape and reel packing for automatic mounting. ■ ORDERING INFORMATION [Example] FBR18 N (a) (b) D (c) 12 (d) ■ (–CSA) –■ (h) (i) –P –M –** (e) (f ) (g) (a) Series Name FBR18 : FBR18 Series [2 pole double throw (2 form C)] (b) Enclosure N : Plastic sealed (washable type) (c) Coil Type D : DC coil (d) Nominal Voltage Refer to the COIL DATA CHART (e) Contact Material Nil –P : Gold-overlay silver-nickel : Gold-overlay silver-palladium (f) Terminal Nil –M : Standard : High density mounting (g) Custom Designation To be assigned custom specification (h) CSA Standard –CSA: UL114 + CSA recognized (i) Packing Nil : Tape and reel (500 pieces/tape and reel) Note: The designation name is stamped on the top of the relay case as follows: (Example) designation ordered : FBR18ND05 Stamp : 18ND05 ■ SAFETY STANDARD AND FILE NUMBERS UL508, 1950, 114 (File No. E63615) C22.2 No. 0, No. 14 (File No. LR40304 or LR64026) Nominal voltage 3 to 24 VDC Contact rating 2 A 30 VDC resistive 0.3 A 110 VDC resistive 0.5 A 125 VAC resistive FBR18 SERIES ■ SPECIFICATIONS Item Contact Standard (Gold-overlay silver-nickel) Arrangement 2 form C (DPDT) Material Gold-overlay silver-nickel Gold-overlay silver-palladium NO Style -P type (Gold-overlay silver-palladium) Bifurcated Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC) Rating (resistive) TF 0.5 A 125 VAC or 1 A 30 VDC Maximum Carrying Current 2 A (at 20°C) Maximum Switching Power 62.5 VA or 60 W Max. Switching Voltage*1 250 VAC or 220 VDC Maximum Switching Current FB Minimum Switching Load*2 DE 2A OR 0.01 mA 10 mVDC (reference) NE GN BE R1 W 8 S ND DI SC /H ON D T EX T O IN C EP FB IE D T R1 8W D Coil Time Value Insulation Approximately 1.0 pF (between open contacts, adjacent contacts ) Approximately 1.0 pF (between coil and contacts) Nominal Power (at 20°C) Approximately 0.14 W (0.2 W for 24 V coil) Operate Power (at 20°C) Maximum 0.08 W (0.112 W for 24 V coil) Thermal Resistance at Continuous Thermal Load Approximately 115°C/W Operating Temperature –40°C to +85°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity 45 to 85%RH Operate (at nominal voltage) Maximum 4 msec. Release (at nominal voltage) Maximum 4 msec. Max. Switching Frequency Mechanical 3 Hz or electrical 0.5 Hz (at contact rating) Resistance (initial) Minimum 1,000 MΩ (at 500 VDC) Dielectric between open contacts Strength adjacent contacts 1,000 VAC 1 minimum between coil and contacts Surge between open Strength contacts, adjacent contact *2 700 2 10 2,500 1,250 2,500 V (at 2 × 10 µs) DC 2 × 105 operations minimum 5 × 105 operations minimum AC 1 × 105 operations minimum 2 × 105 operations minimum Vibration Resistance Misoperation 10 to 55 Hz (double amplitude of 1.5 mm) Endurance 10 to 55 Hz (double amplitude of 3.0 mm) Shock Resistance Misoperation 500 m/s2 (11±1 ms) Endurance 1,000 m/s2 (11 ±1 ms) Weight *1 10 1 × 108 operations minimum Mechanical Electrical (at contact rating) Other 1,500 750 1,500 VAC 1 minimum 1,500 V (at 10 × 700 µs) between coil and contacts Life SI Capacitance (at 10 kHz) Approximately 1.9 g If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. Values when switching a resistive load at normal room temperature and humidity and in a clean atmosphere. The minimum switching load varies with the switching frequency and operation environment. 2 FBR18 SERIES ■ COIL DATA CHART FBR-18 N type MODEL Nominal Coil current resistance (at nominal voltage) (±10%) approx. Nominal voltage NO Standard -P type FBR18ND03 FBR18ND03-P 3 VDC 64.3 Ω FBR18ND04 FBR18ND04-P 4.5 VDC 145 Ω FBR18ND05 FBR18ND05-P 5 VDC 178 Ω FBR18ND06 FBR18ND06-P 6 VDC 257 Ω FBR18ND09 FBR18ND09-P 9 VDC 579 Ω FBR18ND12 FBR18ND12-P 12 VDC FB Must operate1 voltage* Must release 1 voltage* Nominal power Coil temperature rise Approx. 0.08 W Max. Approx. 20 deg (at nominal voltage) 46 mA TF 31 mA 28 mA 23 mA DE 75% max. 10% min. Approx. W of nominal of nominal (at0.14 nominal voltage voltage voltage) 15 mA 1,028 Ω Operate power 11 mA OR NE GN BE R1 W 8 S ND DI SC /H ON D T EX T O IN C EP FB IE D T R1 8W D FBR18ND24 FBR18ND24-P 2,880 Ω 24 VDC 8 mA SI *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. FBR-18 W type MODEL Nominal voltage Coil resistance (±10%) Standard -P type FBR18WD03 FBR18WD03-P 3 VDC 39 Ω FBR18WD04 FBR18WD04-P 4.5 VDC 88 Ω FBR18WD05 FBR18WD05-P 5 VDC 108 Ω FBR18WD06 FBR18WD06-P 6 VDC 156 Ω FBR18WD09 FBR18WD09-P 9 VDC 352 Ω FBR18WD12 FBR18WD12-P 12 VDC 626 Ω FBR18WD24 FBR18WD24-P 24 VDC 2,304 Ω Must operate1 voltage* Must release1 voltage* 0.2 W 0.112 W Nominal power 75% max. 10% min. Approx. W of nominal of nominal (at0.23 nominal voltage voltage voltage) 0.25 W 30 deg Operate power Coil temperature rise Approx. 0.13 W Max. Approx. 30 deg (at nominal voltage) 0.14W 33 deg *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. ■ CHARACTERISTIC DATA Maximum switching capacity Range of operation temperature and voltage Life curve 160 b wa allo 150 v oil le c 140 ge olta 130 120 110 Operating voltage range 100 90 80 70 t op erate Mus ge volta –10 0 10 20 30 40 50 60 70 80 Operating temperature (˚C) Contact load current (A) um (DATA) assumes that the maximum allowable temperature of E type insulation coil is 115˚C ➀ AC resistive load ( AC contact rating) ➁ DC resistive load ( DC contact rating) 2.0 ➁ 1.0 ➀ 0.5 0.3 0.2 0.1 10 20 30 50 125 200 Contact load voltage (V) 500 Service life (operations) xim Ma Nominal voltage multiplying Ffactor (%) (x104) 100 30 V DC resistive load (–P)TYPE 50 125 V AC resistive load 10 5 (–P)TYPE 1 0.5 1.0 1.5 2.0 Contact load current (A) 3 FBR18 SERIES ■ REFERENCE DATA Distribution of operate and release voltage Distribution of operate and release time Operate Release 80 Operate Release NO 50 80 40 30 20 60 TF 40 20 10 0 0 10 20 FB 30 40 50 60 0 70 80 60 Distribution (%) Distribution (%) Distribution (%) Distribution of contact resistance 100 60 DE 0 1 2 3 4 40 OR 20 0 5 6 7 8 0 10 20 30 40 50 60 70 80 NE GN BE R1 W 8 S ND DI SC /H ON D T EX T O IN C EP FB IE D T R1 8W D Rated coil voltage multiplying factor (%) SI Time (ms) ■ DIMENSIONS ●Dimensions ●Schematics (TOP VIEW) Standard (FBR18 type) 7.4+0.1 ●PC board mounting pad layout (TOP VIEW) 1 0.25 10 9 8 3 4 5 2.73 7.02 12 – 10.15+0.2 1.45 14.7+0.3 Contact resistance (mΩ) + 1 5.08 2.54 2.54 5.08 2.54 2.54 5.08 8.9+0.1 (1.0) High density mounting (FBR18-M type) 7.4+0.1 1 0.25 10 9 8 3 4 5 2.2 6.49 12 – 10.35+0.2 1.65 14.7+0.3 + 1 5.08 2.54 2.54 5.08 2.54 2.54 (1.0) 5.08 7.4+0.1 Unit: mm 4 FBR18 SERIES ■ RECOMMENDED SOLDERING CONDITIONS (TEMPERATURE PROFILE) soldering T3 0 215°C maximum soldering TF preheating 30 sec Max. FB 120 sec maximum NO T 3 = 245°C max. T 2 = 200°C max. cooling T 1 = 165°C max. T2 T1 VPS (Vapor Phase Soldering) Temperature (°C) Temperature (°C) IRS (Infrared Reflow Soldering) T3 cooling T2 DE T1 T 3 = 200°C maximum T 2 = 165°C maximum T 1 = 100°C maximum preheating 0 OR 60 sec Max. NE GN BE R1 W 8 S ND DI SC /H ON D T EX T O IN C EP FB IE D T R1 8W D Note: SI 60 sec Max. 90 sec Max. 1.Temperature profiles show the temperature of PC board surface. 2.Please perform soldering test with your actual PC board before mass production, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method. ■ PACKING • Packing orientation code: B (1) Quantity of 1 reel : 500 pieces Feeding Orientation mark side (2) Dimensions (in mm) • REEL DIMENSIONS • TAPE DIMENSIONS Note: Relays are sold in packs of 500 pieces, please order 500 pieces as 1 unit. 5 FBR18 SERIES Fujitsu Components International Headquarter Offices FB Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: [email protected] www.fcal.fujitsu.com NO TF DE OR © 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001 NE GN BE R1 W 8 S ND DI SC /H ON D T EX T O IN C EP FB IE D T R1 8W D SI 6