Features LED DRIVER ● ● ● ● ● ● ● ● ● ● ● LIGHTLINE 30W Class II AC-DC LED Power Supply 500mA or 700mA Constant Current Drives 3 - 15 High brightness LEDs Universal AC Input Active Power Factor Correction >0.95 Fused Input, Protected Output 3kVAC Isolation UL-8750 Certified Output Connector to avoid miswiring Low Cost Long 5 Year Warranty AC/DC-Converter with 5 year Warranty Description A compact 30W constant current switching power module suitable for driving up to 15 high power LEDs (Vf = 3.6V). The output current is fixed at 500mA or 700mA. Active power factor correction is standard. This series features both screw terminal and socket output connections. The socket connecter avoids the possibility of miswiring and damaging the LED load if the LEDs are preassembled into a wiring harness or lamp fitting. E340696 Selection Guide Part Number 30 Watt PFC Single Output Input Voltage Range (VAC) Input Current at full load (mA) Output Output Voltage Range Current (VDC) (mA) Max # LEDs RACD30-500 universal 390 10-56 500 15 x 2W RACD30-700 universal 390 10-43 700 12 x 3W, 12+12 x 1W RoHS 2002/95/EC 6/6 UL-8750 Certified EN 61347 Certified RACD30 Specifications (typical at 25°C and after warm up time unless otherwise specified ) Input Voltage Range Standard 90-264VAC Rated Power 30 Watts max. Input Frequency Range 47-63 Hz Power Factor Full Load, 115VAC/230VAC Open Circuit Voltage 350mA Version (Zener Clamp) 700mA Version 0.9 58VDC 48VDC Inrush Current (<2mS) 115VAC/230VAC Input Current 230VAC, Full Load 390mA typ. Leakage Current Input Fuse 115VAC/240VAC - 60/50Hz Standard 0.5mA typ. T1A Output Current Accuracy 10A max. (combined Tolerance, load Regulation and Line Regulation) Minimum Load Open Circuit Protected ±10% 3 LEDs Output Ripple 150mA max. Hold Up Time 18ms min. Operating Frequency 40 - 100 kHz typ. Efficiency at Full Load 85% RMS Isolation Voltage (input to output) 3kVAC / 1 minute Temperature Coefficient ±0.02%/°C typ. Overload Protection Short Circuit Protection Output Overvoltage Protection 120% typ. 500mA Version 700mA Version Continuous Current Limit 56V Zener Diode Clamp 43V Zener Diode Clamp continued on next page 24 RACD30 REV:0/2011 Please Read Application Notes www.recom-electronic.com LIGHTLINE RACD30 AC/DC-Converter Specifications cont. (typical at 25°C and after warm up time unless otherwise specified ) Overtemperature Protection Operating Temperature Range (free air convection) Shutdown, Automatic restart after cooling down Ambient Temperature -20°C to +50°C Case Temp. 85°C max. (500mA version: 90°C max.) Weight 169g Packing Quantity 1pc Storage Temperature Range -40°C to +100°C Humidity 95% RH max. IP Rating IP20, Indoor Use Only PCB Material Case Material Designed to meet Standards THD Certifications Design Lifetime Connections Plastic Resin with Fibreglass (UL94V-0) Plastic EN55015:2006 + A1: 2007 + A2:2009 EN 61000-3-2:2006 EN 61000-3-3:2006 EN 61547:1995 + A1:2000 UL1310 FCC18A <20% LED Lighting Safety UL8750 SEMKO CE Certification, General Safety EN 61347-1: 2008 SEMKO CE Certification, Safety of AC supplied Control Gear for LED Modules EN 61347-2-13: 2006 Electrical Lighting, EMC Emissions Limits for Harmonics Emissions EMC Compatibilty: Flicker and Voltage Variations Electrical Lighting: EMC Immunity Class II Power Supply Safety FCC 25°C ambient AC Input LED Output LED Output >70 x 10³ hours in operation Screw terminal Screw Terminal 5.5mm Socket with 2mm Pin (Suitable matching plug Switchcraft S760 or similar)* * Do not connect or disconnect the LED load while the converter is on. This may damage the LED or reduce its life. Package Style and Pinning RACD30 3rd angle projection 152 50.0 5.5mm socket 27 Tc 42 Cable entry with strain relief 86 3.5mm dia. Connections 160.0 CN1 22.5 15.5 2 Mounting screws are included Tc=Case Temperature Measuring Point Function L VAC in (L) N VAC in (N) CN2 Function + LED+ - LED- 5.5mm Socket Function Pin LED+ Shell LED- Tolerance XX =+/-1mm XX.X =+/-0.5mm www.recom-international.com REV:0/2011 25