Features LED DRIVER ● ● ● ● ● ● ● ● ● ● ● 20W AC-DC LED Power Supply 350mA , 700mA or 1050mA Constant Current Drives 2 - 16 High brightness LEDs Universal AC Input Active Power Factor Correction >0.95 Fused Input, Protected Output 3kVAC Isolation UL-8750 Certified Output Connector to avoid miswiring Low Cost 5 Year Warranty Description A compact 20W constant current switching power module suitable for driving up to 15 high power LEDs (Vf = 3.6V). The output current is fixed at 350mA or 700mA. Active power factor correction is standard. This series features both screw terminal and socket output connections. The socket connecter avoids the possibility of miswiring and damaging the LED load if the LEDs are preassembled into a wiring harness or lamp fitting. LIGHTLINE AC/DC-Converter 20 Watt PFC Single Output Selection Guide Part Number Input Voltage Range (VAC) Input Current at full load (mA) Output Voltage Range (VDC) Output Current (mA) Max # LEDs RACD20-350 universal 260 6-56 350 15 x 1W RACD20-700 universal 260 6-29 700 8 x 2W, 8+8 x 1W RoHS 2002/95/EC 6/6 RACD20 Specifications (typical at 25°C and after warm up time unless otherwise specified ) Input Voltage Range Standard UL-8750 Certified 90-264VAC Rated Power 20 Watts max. Input Frequency Range Full Load, 115VAC/230VAC 350mA Version 700mA Version Inrush Current (<2mS) 115VAC/230VAC 0.95 6 - 56VDC 6 - 29VDC 10A max. Input Current 230VAC, Full Load 260mA typ. Leakage Current Input Fuse 115VAC/240VAC - 60/50Hz Standard 0.5mA typ. T1A (combined Tolerance, load Regulation and Line Regulation) ±10% Open Circuit Protected 2 LEDs Minimum Load Output Ripple 150mA max. Hold Up Time 18ms min. Operating Frequency 40 - 100 kHz typ. Efficiency at Full Load 83% RMS Isolation Voltage (input to output) 3kVAC / 1 minute Temperature Coefficient ±0.02%/°C typ. Overload Protection Short Circuit Protection Output Overvoltage Protection 120% typ. 350mA Version 700mA Version Continuous Current Limit 56V Zener Diode Clamp 29V Zener Diode Clamp continued on next page 20 RACD20 47-63 Hz Power Factor Output Voltage Range Output Current Accuracy E340696 REV: 2/2010 Please Read Application Notes www.recom-electronic.com LIGHTLINE RACD20 AC/DC-Converter Specifications cont. (typical at 25°C and after warm up time unless otherwise specified ) Overtemperature Protection Operating Temperature Range (free air convection) Shutdown, Automatic restart after cooling down Ambient Temperature -20°C to +50°C Case Temp. 85°C max. (350mA version: 90°C max.) Weight 140g Packing Quantity 1pc Storage Temperature Range -40°C to +100°C Humidity 95% RH max. IPRating IP20 PCB Material Case Material Designed to meet Standards THD Certifications Design Lifetime Connections Plastic Resin with Fibreglass (UL94V-0) Plastic EN 61347-1 EN 61347-2-13 EN55015, FCC18A EN 61000-3-2 EN 61000-3-3 EN 61547 UL1310 <20% UL8750 Lamp Control Gear, General Safety Lamp Control Gear for LED Modules Electrical Lighting, EMC Emissions Limits for Harmonics Emissions EMC Compatibilty: Flicker and Voltage Variations Electrical Lighting: EMC Immunity Class II Power Supply Safety LED Lighting Safety 25°C ambient AC Input LED Output LED Output >70 x 10³ hours in operation Screw terminal Screw Terminal 5.5mm Socket with 2mm Pin (Suitable matching plug Switchcraft S760 or similar) Package Style and Pinning RACD20 3rd angle projection 145 5.5mm socket 50 42 3.5mm dia. 137 Cable entry with strain relief Connections CN1 22 15 2 Mounting screws are included Function L VAC in (L) N VAC in (N) CN2 Function + LED+ - LED- 5.5mm Socket Function www.recom-international.com REV:2/2010 Pin LED+ Shell LED- 21