STMICROELECTRONICS STD9NM50N

STD9NM50N - STD9NM50N-1
STF9NM50N - STP9NM50N
N-channel 500V - 0.47Ω - 7.5A - TO-220 - TO-220FP - IPAK - DPAK
Second generation MDmesh™ Power MOSFET
Features
Type
VDSS
(@Tjmax)
RDS(on)
ID
STD9NM50N
550V
<0.56Ω
7.5A
STD9NM50N-1
550V
<0.56Ω
7.5A
3
2
3
1
1
2
IPAK
TO-220
STP9NM50N
550V
<0.56Ω
7.5A
STF9NM50N
550V
<0.56Ω
7.5A(1)
1. Limited only by maximum temperature allowed
3
1
■
100% avalanche tested
■
Low input capacitance and gate charge
■
Low gate input resistance
Description
e
t
le
3
1
2
TO-220FP
o
r
P
Internal schematic diagram
This series of devices implements second
generation MDmesh™ technology. This
revolutionary Power MOSFET associates a new
vertical structure to the Company’s strip layout to
yield one of the world’s lowest on-resistance and
gate charge. It is therefore suitable for the most
demanding high efficiency converters.
)
s
(
ct
o
s
b
O
-
u
d
o
Applications
■
c
u
d
DPAK
)
s
t(
r
P
e
Switching application
t
e
l
o
Order codes
s
b
O
Part number
Marking
Package
Packaging
STD9NM50N-1
D9NM50N
IPAK
Tube
STD9NM50N
D9NM50N
DPAK
Tape & reel
STP9NM50N
P9NM50N
TO-220
Tube
STF9NM50N
F9NM50N
TO-220FP
Tube
10 April 2007
Rev 1
1/17
www.st.com
17
Contents
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
............................ 6
3
Test circuit
................................................ 9
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
c
u
d
e
t
le
)
s
(
ct
u
d
o
r
P
e
t
e
l
o
s
b
O
2/17
o
s
b
O
-
o
r
P
)
s
t(
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
1
Electrical ratings
Electrical ratings
Table 1.
Absolute maximum ratings
Value
Symbol
Parameter
Unit
TO-220
DPAK/IPAK
TO-220FP
VDS
Drain-source voltage (VGS=0)
500
V
VGS
Gate-source voltage
± 25
V
ID
Drain current (continuous) at TC = 25°C
7.5
7.5 (1)
A
ID
Drain current (continuous) at TC = 100°C
5
5 (1)
A
IDM (2)
Drain current (pulsed)
30
30 (1)
A
PTOT
Total dissipation at TC = 25°C
70
25
dv/dt (3)
VISO
Tj
Tstg
Peak diode recovery voltage slope
uc
Insulation withstand voltage (RMS) from
all three leads to external heat sink
(t=1s;TC=25°C)
15
--
r
P
e
t
le
Operating junction temperature
Storage temperature
od
2500
-55 to 150
)
s
t(
W
V/ns
V
°C
o
s
b
O
-
1. Limited only by maximum temperature allowed
2. Pulse width limited by safe operating area
3. ISD ≤7.5A, di/dt ≤400A/µs, VDD =80% V(BR)DSS
Table 2.
)
s
(
ct
Thermal data
Symbol
u
d
o
Parameter
TO-220FP
Unit
1.78
5
°C/W
Rthj-case
Thermal resistance junction-case max
Rthj-amb
Thermal resistance junction-amb max
62.5
°C/W
Maximum lead temperature for soldering
purpose
300
°C
Max value
Unit
3
A
150
mJ
r
P
e
t
e
l
o
s
b
O
TO-220
DPAK/IPAK
Tl
Table 3.
Symbol
Avalanche characteristics
Parameter
IAS
Avalanche current, repetitive or notrepetitive (pulse width limited by Tj max)
EAS
Single pulse avalanche energy
(starting Tj=25°C, ID=IAS, VDD= 50V)
3/17
Electrical characteristics
2
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 4.
On/off states
Symbol
V(BR)DSS
dv/dt(1)
Parameter
Drain-source breakdown
voltage
ID = 1mA, VGS= 0
Drain-source voltage slope
Vdd= 400V, Id=7.5A,
Vgs=10V
Max
Unit
500
V
35
VDS = Max rating,
V/ns
VDS = Max rating,Tc = 125°C
Gate body leakage current
(VDS = 0)
VGS = ±20V
100
nA
VGS(th)
Gate threshold voltage
VDS= VGS, ID = 250µA
4
V
RDS(on)
Static drain-source on
resistance
VGS= 10V, ID= 3.7A
0.47
0.56
Ω
Typ
Max
Unit
IGSS
Characteristics value at turn off on inductive load
e
t
le
Dynamic
Symbol
so
Parameter
gfs(1)
Forward transconductance
Ciss
Input capacitance
Output capacitance
Reverse transfer
capacitance
Test conditions
b
O
-
VDS =15V, ID= 3.7A
2
3
c
u
d
)
s
t(
o
r
P
Min
5
S
VDS = 50V, f=1MHz, VGS=0
570
46
6
pF
pF
pF
VGS=0, VDS = 0V to 400V
94
pF
r
P
e
f=1MHz Gate DC Bias=0
Test signal level=20mV
Open drain
6
Ω
Qgs
VGS =10V
20
4
10
nC
nC
nC
Coss
Crss
Coss eq.(2)
t
e
l
o
4/17
Typ
µA
µA
Zero gate voltage drain
current (VGS = 0)
Table 5.
)
s
(
ct
u
d
o
Equivalent output
characteristics
Rg
Gate input resistance
Qg
Total gate charge
Gate-source charge
Gate-drain charge
Qgd
1.
Min
1
100
IDSS
1.
s
b
O
Test conditions
VDD= 400V, ID = 7.5A
(see Figure 16)
Pulsed: pulse duration = 300µs, duty cycle 1.5%
2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS
increases from 0 to 80% VDSS
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
Table 6.
Switching times
Symbol
Parameter
td(on)
tr
td(off)
tf
Table 7.
Electrical characteristics
Test conditions
Turn-on delay time
Rise time
Turn-off delay time
Fall time
RG=4.7Ω, VGS=10V
ISDM(1)
Source-drain current
Source-drain current (pulsed)
VSD(2)
Forward on voltage
ISD=7.5A, VGS=0
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD=7.5A, di/dt=100A/µs,
VDD=100V, Tj=150°C
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD=7.5A, di/dt=100A/µs,
VDD=100V, Tj= 25°C
trr
Qrr
IRRM
Test conditions
e
t
le
(see Figure 17)
ns
ns
ns
ns
Typ
420
3
14
Max
Unit
7.5
30
A
A
1.2
V
c
u
d
o
r
P
280
2
14
)
s
t(
ns
µC
A
ns
µC
A
o
s
b
O
-
Pulsed: pulse duration = 300µs, duty cycle 1.5%
)
s
(
ct
Min
(see Figure 17)
1. Pulse width limited by safe operating area
2.
Unit
Source drain diode
ISD
IRRM
Max
11
16
45
19
(see Figure 15)
Parameter
Qrr
Typ
VDD=250V, ID=3.7A,
Symbol
trr
Min
u
d
o
r
P
e
t
e
l
o
s
b
O
5/17
Electrical characteristics
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
2.1
Electrical characteristics (curves)
Figure 1.
Safe operating area for TO-220 /
DPAK / IPAK
Figure 3.
Figure 2.
Safe operating area for TO-220FP
Figure 4.
Thermal impedance for TO-220 /
DPAK / IPAK
Thermal impedance for TO-220FP
c
u
d
e
t
le
)
s
(
ct
Figure 5.
r
P
e
Output characteristics
t
e
l
o
s
b
O
6/17
u
d
o
o
r
P
o
s
b
O
Figure 6.
)
s
t(
Transfer characteristics
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
Electrical characteristics
Figure 7.
Transconductance
Figure 8.
Static drain-source on resistance
Figure 9.
Gate charge vs. gate-source
voltage
Figure 10. Capacitance variations
c
u
d
e
t
le
)
s
(
ct
u
d
o
o
r
P
o
s
b
O
-
Figure 11. Normalized gate threshold voltage
vs. temperature
r
P
e
)
s
t(
Figure 12. Normalized on resistance vs.
temperature
t
e
l
o
s
b
O
7/17
Electrical characteristics
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
Figure 13. Source-drain diode forward
characteristics
Figure 14. Normalized BVDSS vs. temperature
c
u
d
e
t
le
)
s
(
ct
u
d
o
r
P
e
t
e
l
o
s
b
O
8/17
o
s
b
O
-
o
r
P
)
s
t(
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
3
Test circuit
Test circuit
Figure 15. Switching times test circuit for
resistive load
Figure 16. Gate charge test circuit
c
u
d
)
s
t(
Figure 17. Test circuit for inductive load
Figure 18. Unclamped inductive load test
switching and diode recovery times
circuit
e
t
le
)
s
(
ct
u
d
o
Figure 19. Unclamped inductive waveform
r
P
e
o
r
P
o
s
b
O
-
Figure 20. Switching time waveform
t
e
l
o
s
b
O
9/17
Package mechanical data
4
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
c
u
d
e
t
le
)
s
(
ct
u
d
o
r
P
e
t
e
l
o
s
b
O
10/17
o
s
b
O
-
o
r
P
)
s
t(
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
Package mechanical data
TO-220 MECHANICAL DATA
mm.
DIM.
MIN.
TYP
inch
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
b
0.61
0.88
0.024
0.034
b1
1.15
1.70
0.045
0.066
c
0.49
0.70
0.019
0.027
D
15.25
15.75
0.60
0.620
E
10
10.40
0.393
0.409
e
2.40
2.70
0.094
0.106
e1
4.95
5.15
0.194
0.202
F
1.23
1.32
0.048
0.052
)
s
t(
H1
6.20
6.60
0.244
0.256
J1
2.40
2.72
0.094
0.107
L
13
14
0.511
0.551
L1
3.50
3.93
0.137
L20
L30
d
o
r
0.645
28.90
1.137
øP
3.75
3.85
Q
2.65
2.95
)
s
(
ct
0.147
P
e
let
0.104
uc
0.154
16.40
0.151
0.116
o
s
b
O
-
u
d
o
r
P
e
t
e
l
o
s
b
O
11/17
Package mechanical data
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
TO-220FP MECHANICAL DATA
mm.
DIM.
MIN.
A
4.4
inch
TYP
MAX.
MIN.
TYP.
4.6
0.173
0.181
MAX.
0.106
B
2.5
2.7
0.098
D
2.5
2.75
0.098
0.108
E
0.45
0.7
0.017
0.027
F
0.75
1
0.030
0.039
F1
1.15
1.7
0.045
0.067
F2
1.15
1.7
0.045
0.067
G
4.95
5.2
0.195
0.204
G1
2.4
2.7
0.094
0.106
H
10
10.4
0.393
0.409
16
0.630
L3
28.6
30.6
1.126
L4
9.8
10.6
.0385
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Ø
3
3.2
1.204
0.114
r
P
e
t
le
0.626
0.354
od
0.141
0.645
0.366
0.118
o
s
b
O
-
0.126
s
b
O
12/17
G
G1
F
F2
t
e
l
o
L7
H
o
r
P
e
du
L3
L6
F1
B
)
s
(
ct
L2
L5
)
s
t(
0.417
D
A
L5
uc
E
L2
1 2 3
L4
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
Package mechanical data
TO-251 (IPAK) MECHANICAL DATA
mm
DIM.
MIN.
inch
TYP.
MAX.
MIN.
2.2
2.4
0.086
0.094
A1
0.9
1.1
0.035
0.043
A3
0.7
1.3
0.027
0.051
B
0.64
0.9
0.025
0.031
B2
5.2
5.4
0.204
0.212
0.85
B5
0.033
0.3
0.012
0.95
C
0.45
C2
0.48
D
6
E
6.4
6.6
0.037
0.6
0.017
0.023
0.6
0.019
0.023
6.2
0.236
0.244
0.252
0.260
G
4.4
4.6
0.173
H
15.9
16.3
0.626
L
9
9.4
0.354
L1
0.8
1.2
0.031
1
0.031
e
t
le
0.039
B5
B
G
=
1
=
2
=
3
=
=
B2
=
r
P
e
E
u
d
o
0.370
0.047
L
D
B3
)
s
(
ct
o
s
b
O
B6
C2
A
H
L2
Pr
od
A3
0.8
0.181
0.641
A1
L2
uc
)
s
t(
C
B6
s
b
O
MAX.
A
B3
t
e
l
o
TYP.
L1
0068771-E
13/17
Package mechanical data
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
DPAK MECHANICAL DATA
mm.
inch
DIM.
MAX.
MIN.
A
A1
A2
B
b4
MIN.
2.2
0.9
0.03
0.64
5.2
TYP
2.4
1.1
0.23
0.9
5.4
0.086
0.035
0.001
0.025
0.204
0.094
0.043
0.009
0.035
0.212
C
C2
D
D1
E
E1
0.45
0.48
6
0.6
0.6
6.2
0.017
0.019
0.236
0.023
0.023
0.244
6.6
0.252
5.1
TYP.
0.200
6.4
0.260
4.7
e
e1
H
L
(L1)
L2
L4
R
V2
0.185
2.28
4.4
9.35
1
0.090
4.6
10.1
0.173
0.368
0.039
0.110
0.031
1
0°
P
e
let
)
s
(
ct
8°
0°
c
u
d
ro
0.023
0.2
)
s
t(
0.181
0.397
2.8
0.8
0.6
MAX.
0.039
0.008
8°
o
s
b
O
-
u
d
o
r
P
e
t
e
l
o
s
b
O
14/17
0068772-F
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
5
Packaging mechanical data
Packaging mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
c
u
d
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
ro
MAX.
330
P
e
let
B
1.5
C
12.8
D
20.2
G
16.4
N
50
o
s
b
O
-
T
(s)
TAPE MECHANICAL DATA
DIM.
12.1
t
c
u
1.6
0.059 0.063
1.85
0.065 0.073
MIN.
MAX.
6.8
7
B0
10.4
10.6
MIN.
od
7.4
7.6
0.291 0.299
2.75
0.100 0.108
P0
3.9
4.1
0.153 0.161
P1
7.9
8.1
0.311 0.319
1.9
2.1
0.075 0.082
P2
R
40
W
15.7
0.059
13.2
0.504 0.520
18.4
0.645 0.724
0.795
1.968
22.4
0.881
BASE QTY
BULK QTY
2500
2500
0.476
2.55
t
e
l
o
1.65
E
MAX.
12.992
0.409 0.417
F
1.5
MIN.
MAX.
K0
D1
1.5
inch
0.267 0.275
r
P
e
D
bs
inch
A0
B1
O
mm
)
s
t(
0.059
1.574
16.3
0.618
0.641
15/17
Revision history
6
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
Revision history
Table 8.
Revision history
Date
Revision
10-Apr-2007
1
Changes
First release
c
u
d
e
t
le
)
s
(
ct
u
d
o
r
P
e
t
e
l
o
s
b
O
16/17
o
s
b
O
-
o
r
P
)
s
t(
STD9NM50N - STD9NM50N-1 - STP9NM50N - STF9NM50N
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
)
s
t(
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
c
u
d
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
e
t
le
o
r
P
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
o
s
b
O
-
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
)
s
(
ct
u
d
o
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
r
P
e
t
e
l
o
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
bs
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
O
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
17/17