STMICROELECTRONICS STP08C596B1

STP08C596
8-BIT CONSTANT CURRENT LED SINK DRIVER
■
8 CONSTANT CURRENT OUTPUT
CHANNELS
■
ADJUSTABLE OUTPUT CURRENT
THROUGH EXTERNAL RESISTOR
■
SERIAL DATA IN/PARALLEL DATA OUT
■
SERIAL OUT CHANGE STATE ON THE
FALLING EDGES OF CLOCK
■
OUTPUT CURRENT: 15-120 mA
■
25 MHz CLOCK FREQ.
■
EFFICIENCY PACKAGE
DIP-16
SO-16
DESCRIPTION
The STP08C596 is a monolithic, medium-voltage,
low current power 8-bit shift register designed for
LED panel display. The STP08C596 contains a
8-bit serial-in, parallel-out shift register that feeds
a 8-bitD-type storage register. In the output stage,
eight regulated current sources were designed to
provide 15-120mA constant current to drive the
LEDs.
Compared with the STPIC6C595, the device
provides
great
flexibility
and
improved
performance in LED panel system design.
TSSOP16
Trough an external resistor, users may adjust the
STP08C596 output current, controlling in this way
the light intensity of LEDs.
The STP08C596 guarantees 16V output driving
capability, allowing users to connect more LEDs in
series. The high clock frequency, 25 MHz, also
satisfies the system requirement of high volume
data transmission.
Table 1: Order Codes
Part Number
STP08C596B1
STP08C596M
STP08C596MTR
STP08C596TTR
May 2005
Temp. Range
-40°C to
-40°C to
-40°C to
-40°C to
125°C
125°C
125°C
125°C
Package
Comments
DIP-16
SO-16 (Tube)
SO-16 (Tape & Reel)
TSSOP16 (Tape & Reel)
25 part per tube
50 parts per tube
1000 parts per reel
2500 parts per reel
Rev. 9
1/16
STP08C596
Table 2: Current Accuracy
Current accuracy
Output Voltage
Output Current
Between bits
Between ICs
TYP. ± 3%
± 10%
≥ 0.7V
15 to 120 mA
Figure 1: Pin Connection
Table 3: Pin Description
PIN N°
Symbol
1
2
3
4
5-12
13
14
15
16
GND
SDI
CLK
/LE
OUT 0-7
/OE
SDO
R-EXT
VDD
Name and Function
Ground Terminal
Serial data input terminal
Clock input terminal
Latch input terminal
Output terminal
Output enable input terminal (active low)
Serial data out terminal
Constant Current programming
5V Supply voltage terminal
Table 4: Absolute Maximum Ratings
Symbol
Parameter
Value
Unit
V
VDD
Supply Voltage
0 to 7
VO
Output Voltage
-0.5 to 16
V
IO
Output Current
120
mA
VI
Input Voltage
-0.4 to VDD+0.4
980
mA
V
IGND
GND Terminal Current
fCLK
Clock Frequency
25
MHz
TOPR
Operating Temperature Range
-40 to +125
°C
TSTG
Storage Temperature Range
-55 to +150
°C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is
not implied.
2/16
STP08C596
Table 5: Thermal Data
Symbol
Rthj-amb
Parameter
Thermal Resistance Junction-ambient
DIP-16
SO-16
TSSOP16
Unit
90
125
140
°C/W
Table 6: Recommended Operating Conditions
Symbol
Parameter
Test Conditions
VDD
Supply Voltage
VO
Output Voltage
IO
Output Current
OUTn
IOH
Output Current
IOL
Output Current
VIH
Input Voltage
VIL
Input Voltage
Min.
Typ.
Max.
Unit
4.5
5.0
5.5
V
16.0
V
120
mA
SERIAL-OUT
+1
mA
SERIAL-OUT
-1
mA
0.7VDD
VDD+0.3
V
-0.3
0.3VDD
V
15
twLAT
/LE Pulse Width
20
ns
twCLK
CLK Pulse Width
VDD = 3.0 to 3.6V
20
ns
twEN
/OE Pulse Width
400
ns
20
ns
15
ns
15
ns
tSETUP(D) Setup Time for DATA
tHOLD(D)
Hold Time for DATA
tSETUP(L) Setup Time for LATCH
fCLK
Clock Frequency
Cascade Operation
25
MHz
Table 7: Electrical Characteristics (VDD=5V, T = 25°C, unless otherwise specified.)
Symbol
Parameter
VIH
Input Voltage High Level
VIL
Input Voltage Low Level
IOH
Output Leakage Current
Test Conditions
VOL
Output Voltage (Serial-OUT) IOL = 1mA
Output Voltage (Serial-OUT) IOH = -1mA
IOL1
Output Current
VO = 0.7V REXT = 910 Ω
VO = 0.7V REXT = 360 Ω
Output Current Error
between bit (All Output ON)
VO = 0.7V REXT = 910 Ω
VO = 0.7V REXT = 360 Ω
IOL2
∆IOL2
RSIN(up)
Min.
Typ.
Unit
VDD
V
GND
0.3VDD
V
10
µA
0.4
V
VOH = 16 V
VOH
∆IOL1
Max.
0.7VDD
VDD-0.4V
Pull-up Resistor
RSIN(down) Pull-down Resistor
V
20.6
20.7
20.9
mA
50.6
51.0
51.5
mA
±3
%
±3
%
150
300
600
KΩ
100
200
400
KΩ
0.3
0.6
mA
IDD(OFF1) Supply Current (OFF)
REXT = OPEN
OUT 0 to 7 = OFF
IDD(OFF2)
REXT = 470 Ω
OUT 0 to 7 = OFF
5.5
7.7
IDD(OFF3)
REXT = 250 Ω
OUT 0 to 7 = OFF
10.1
14.1
IDD(ON1)
IDD(ON2)
Supply Current (ON)
REXT = 470 Ω
OUT 0 to 7 = ON
5.5
7.7
REXT = 250 Ω
OUT 0 to 7 = ON
10.1
14.1
3/16
STP08C596
Table 8: Switching Characteristics (VDD=5V, T = 25°C, unless otherwise specified.)
Symbol
Parameter
tPLH1
tr
Propagation Delay Time,
CLK-OUTn, /LE = H, /OE = L
Propagation Delay Time,
/LE-OUTn, /OE = L
Propagation Delay Time,
/OE-OUTn, /LE = H
Propagation Delay Time,
CLK-SDO
Propagation Delay Time,
CLK-OUTn, /LE = H, /OE = L
Propagation Delay Time,
/LE-OUTn, /OE = L
Propagation Delay Time,
/OE-OUTn, /LE = H
Propagation Delay Time,
CLK-SDO
Output Rise Time
tf
Output Fall Time
tPLH2
tPLH3
tPLH
tPHL1
tPHL2
tPHL3
tPHL
Test Conditions
VDD = 5 V
VIH = VDD
VIL = GND
CL = 13pF
IO = 40mA
VL = 3 V
REXT = 470 Ω
RL = 65 Ω
EQUIVALENT CIRCUIT OF INPUTS AND OUTPUTS
Figure 2: /OE Terminal
4/16
Min.
Typ.
Max.
Unit
200
280
ns
160
250
ns
145
200
ns
15
30
ns
15
30
ns
15
30
ns
45
60
ns
15
300
ns
160
200
ns
15
25
ns
STP08C596
Figure 3: /LE Terminal
Figure 4: CLK, SDI Terminal
Figure 5: SDO Terminal
5/16
STP08C596
Figure 6: Block Diagram
Figure 7: Timing Diagram
6/16
STP08C596
Figure 8: Clock, Serial-In, Serial-Out
Figure 9: Clock, Serial-In, Latch, Enable, Outputs
7/16
STP08C596
Figure 10: Outputs
TEST CIRCUIT
Figure 11: DC Characteristic
8/16
STP08C596
Figure 12: AC Characteristic
Figure 13: Output Current-R EXT Resistor
Figure 14: Power Dissipation vs Temperature
Package
9/16
STP08C596
Plastic DIP-16 (0.25) MECHANICAL DATA
mm.
inch
DIM.
MIN.
a1
0.51
B
0.77
TYP
MAX.
MIN.
TYP.
MAX.
0.020
1.65
0.030
0.065
b
0.5
0.020
b1
0.25
0.010
D
20
0.787
E
8.5
0.335
e
2.54
0.100
e3
17.78
0.700
F
7.1
0.280
I
5.1
0.201
L
Z
3.3
0.130
1.27
0.050
P001C
10/16
STP08C596
SO-16 MECHANICAL DATA
DIM.
mm.
MIN.
TYP
A
a1
inch
MAX.
MIN.
TYP.
1.75
0.1
0.068
0.25
a2
MAX.
0.004
0.010
1.64
0.063
b
0.35
0.46
0.013
0.018
b1
0.19
0.25
0.007
0.010
C
0.5
0.019
c1
45° (typ.)
D
9.8
10
0.385
0.393
E
5.8
6.2
0.228
0.244
e
1.27
0.050
e3
8.89
0.350
F
3.8
4.0
0.149
0.157
G
4.6
5.3
0.181
0.208
L
0.5
1.27
0.019
M
S
0.62
0.050
0.024
8° (max.)
0016020D
11/16
STP08C596
TSSOP16 MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
A
MAX.
MIN.
TYP.
MAX.
1.2
A1
0.05
A2
0.8
b
0.047
0.15
0.002
0.004
0.006
1.05
0.031
0.039
0.041
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0079
D
4.9
5
5.1
0.193
0.197
0.201
E
6.2
6.4
6.6
0.244
0.252
0.260
E1
4.3
4.4
4.48
0.169
0.173
0.176
1
e
0.65 BSC
K
0˚
L
0.45
A
0.60
0.0256 BSC
8˚
0˚
0.75
0.018
8˚
0.024
0.030
A2
A1
b
e
K
c
L
E
D
E1
PIN 1 IDENTIFICATION
1
0080338D
12/16
STP08C596
Tape & Reel SO-16 MECHANICAL DATA
mm.
inch
DIM.
MIN.
A
TYP
MAX.
MIN.
330
MAX.
12.992
C
12.8
D
20.2
0.795
N
60
2.362
T
13.2
TYP.
0.504
22.4
0.519
0.882
Ao
6.45
6.65
0.254
0.262
Bo
10.3
10.5
0.406
0.414
Ko
2.1
2.3
0.082
0.090
Po
3.9
4.1
0.153
0.161
P
7.9
8.1
0.311
0.319
13/16
STP08C596
Tape & Reel TSSOP16 MECHANICAL DATA
mm.
inch
DIM.
MIN.
A
MAX.
MIN.
330
13.2
TYP.
MAX.
12.992
C
12.8
D
20.2
0.795
N
60
2.362
T
14/16
TYP
0.504
22.4
0.519
0.882
Ao
6.7
6.9
0.264
0.272
Bo
5.3
5.5
0.209
0.217
Ko
1.6
1.8
0.063
0.071
Po
3.9
4.1
0.153
0.161
P
7.9
8.1
0.311
0.319
STP08C596
Table 9: Revision History
Date
Revision
03-Aug-2004
6
Description of Changes
23-Feb-2005
7
Package TSSOP (Exposed Pad) removed. Table 8 - pag. 4 data changed.
Figure 14 - pag. 10 changed.
Mistake on Table 7 - IDDOFF and IDDON OUT 0 to 15 ==> OUT 0 to 7.
31-Mar-2005
02-May-2005
8
9
Mistake on Fig. 7.
Typing Error on the description features.
15/16
STP08C596
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
All other names are the property of their respective owners
© 2005 STMicroelectronics - All Rights Reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
16/16