UNISONIC TECHNOLOGIES CO., LTD PZT2222A NPN SILICON TRANSISTOR NPN GENERAL PURPOSE AMPLIFIER FEATURES * This device is for use as a medium power amplifier and switch requiring collector currents up to 500mA. 1 SOT-223 ORDERING INFORMATION Ordering Number Lead Free Halogen Free PZT2222AG-AA3-R PZT2222AL-AA3-R PZT2222AL-AA3-R Package SOT-223 Pin Assignment 1 2 3 B C E (1)Packing Type (1) R: Tape Reel (2)Package Type (2) AA3: SOT-223 (3)Lead Free (3) G: Halogen Free, L: Lead Free www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd Packing Tape Reel 1 of 6 QW-R207-001.D PZT2222A NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector-Base Voltage VCBO 75 V Collector-Emitter Voltage VCEO 40 V Emitter-Base Voltage VEBO 6 V Collector Current IC 0.6 A Total Device Dissipation PC 1 W Junction Temperature TJ +150 °C Storage Temperature TSTG -55 ~ +150 °C Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. THERMAL DATA (TA=25°C, unless otherwise specified) PARAMETER Junction to Ambient SYMBOL θJA RATINGS 125 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) PARAMETER OFF CHARACTERISTICS Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-off Current SYMBOL BVCBO BVCEO BVEBO ICEO Collector Cut-Off Current ICBO Emitter Cut-Off Current Base Cut-Off Current ON CHARACTERISTICS IEBO IBL DC Current Gain hFE Collector-Emitter Saturation Voltage (Note) VCE(SAT) Base-Emitter Saturation Voltage (Note) VBE(SAT) SMALL SIGNAL CHARACTERISTICS Transition Frequency Output Capacitance Input Capacitance Collector Base Time Constant fT COBO CIBO rB'CC Noise Figure NF Real Part of Common-Emitter High Frequency Input Impedance TEST CONDITIONS IC=10μA, IE=0 IC=10mA, IB=0 IE=10μA, IC=0 VCE=60V, VEB(OFF)=3.0V VCB=60V, IE=0 VCB=60V,IE=0, TA=150°C VEB=3.0V, IC=0 VCE=60V, VEB(OFF)=3.0V 75 40 6 IC=0.1mA, VCE=10V IC=1.0mA, VCE=10V IC=10mA, VCE=10V IC=10mA, VCE=10V, TA=-55°C IC=150mA, VCE=10V (Note) IC=150mA, VCE=1.0V (Note) IC=500mA, VCE=10V (Note) IC=150mA, IB=15mA IC=500mA, IB=50mA IC=150mA, IB=15mA IC=500mA, IB=50mA 35 50 75 35 100 50 40 IC=20mA, VCE=20V, f=100MHz VCB=10V, IE=0, f=100kHz VEB=0.5V, IC=0, f=100kHz IC=20mA, VCB=20V, f=31.8MHz IC=100μA, VCE=10V, RS=1.0kΩ, f=1.0kHz 300 RE(HJE) IC=20mA, VCB=20V, f=300MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX 10 0.01 10 10 20 0.6 UNIT V V V nA μA nA nA 300 0.3 1.0 1.2 2.0 V V 8.0 25 150 MHz pF pF pS 4.0 dB 60 Ω 2 of 6 QW-R207-001.D PZT2222A NPN SILICON TRANSISTOR ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS SWITCHING CHARACTERISTICS Delay time tD VCC=30V, VBE(OFF)=0.5V, Rise time tR IC=150mA, IB1=15mA Storage time tS VCC=30V, IC=150mA, Fall time tF IB1= IB2=15mA Note: Pulse test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2.0% UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 10 25 225 60 ns ns ns ns 3 of 6 QW-R207-001.D PZT2222A NPN SILICON TRANSISTOR TEST CIRCUIT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 6 QW-R207-001.D PZT2222A NPN SILICON TRANSISTOR TYPICAL CHARACTERISTICS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R207-001.D PZT2222A TYPICAL CHARACTERISTICS(Cont.) Turn On and Turn Off Times vs. Collector Current IC IB1=IB2=10 400 Switching Times vs. Collector Current 400 IB1=IB2= 320 320 VCC =25V Time (ns) Time (ns) VCC =25V 240 160 tOFF 80 tON 0 10 IC 10 100 1000 Collector Current, IC (mA) 240 tS 160 tF 80 tR tD 0 10 100 1000 Collector Current, IC (mA) Power Dissipation, PD (W) NPN SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R207-001.D