POWER RELAY 1 POLE—5 A (MEDIUM LOAD CONTROL) JV SERIES RoHS compliant n FEATURES UL, CSA, VDE, SEMKO, CQC recognized l UL class B (130°C) insulation l Low profile and space saving —Height: 12.5 mm —Mounting space: 175 mm2 l High sensitivity in small package —Operating power: 0.112 to 0.13 W —Nominal power: 0.2 to 0.3 W l High insulation with reinforced insulation system (between coil and contacts) —Insulation distance: 8 mm —Dielectric strength: 5,000 VAC —Surge strength: 10,000 V l Plastic materials—UL94 flame class V-0 —UL CTI level class 2 l Plastic sealed type l Cadmium free contacts l RoHS compliant since date code: 0434R Please see page 5 for more information l n ORDERING INFORMATION [Example] JV – 12 S – K T (a) (*) (b) (c) (d) (e) (a) Series Name JV: JV Series (b) Nominal Voltage Refer to the COIL DATA CHART (c) Coil Type Nil: Standard type (300mW) S : High sensitivity type (200mW) (d) Enclosure K : Plastic sealed type (e) Mounting T : High density mounting type (avoid reverse insertion) Note: Actual marking omits the hyphen (-) of (*) 1 JV SERIES n COIL DATA CHART MODEL Nominal voltage Coil resistance (±10%) Must operate voltage* Must release voltage* Nominal power JV- 3-KT 3 VDC 30 Ω +1.98 VDC +0.15 VDC 300 mW JV- 5-KT 5 VDC 83.3Ω +3.3 VDC +0.25 VDC 300 mW JV- 6-KT 6 VDC 120 Ω +3.96 VDC +0.3 VDC 300 mW JV- 9-KT 9 VDC 270 Ω +5.94 VDC +0.45 VDC 300 mW JV-12-KT 12 VDC 480 Ω +7.9 VDC +0.6 VDC 300 mW JV-24-KT 24VDC 1,920 Ω +15.8 VDC +1.2 VDC 300 mW 48 VDC 7,680 Ω +31.7 VDC +2.4 VDC 300 mW 3 VDC 45 Ω +2.25 VDC +0.15 VDC 200 mW Standard Type JV-48-KT JV- 3S-KT JV- 5S-KT 5 VDC 125 Ω +3.75 VDC +0.25 VDC 200 mW JV- 6S-KT 6 VDC 180 Ω +4.5 VDC +0.3 VDC 200 mW JV- 9S-KT 9 VDC 405 Ω +6.75 VDC +0.45 VDC 200 mW JV-12S-KT 12 VDC 720 Ω +9.0 VDC +0.6 VDC 200 mW JV-18S-KT 18 VDC 1,620 Ω +13.5 VDC +0.9 VDC 200 mW JV-24S-KT 24 VDC 2,880 Ω +18.0 VDC +1.2 VDC 200 mW High Sensitivity Type Note : All values in the table are measured at 20°C. *: Pulse operate JV SERIES n SPECIFICATIONS Item Contact Arrangement Standard Type JV-( ) 1 form A (SPST-NO) Material Silver alloy Configuration Single type Resistance (initial) Maximum 70 mΩ (at 1 A 6 VDC) Rating 5 A 250 VAC or 5 A 30 VDC (resistive load) Maximum Carrying Current 5A Maximum Switching Power 1,250 VA, 150 W Maximum Switching Voltage 250 VAC, 150 VDC Maximum Switching Current 5A 1 High Sensitivity Type JV-( ) S 100 mA 5 VDC Minimum Switching Load* Coil Nominal Power (at 20°C) 300 mW 200 mW Operate Power (at 20°C) 130 mW 113 mW Operating Temperature –40°C to +70°C (no frost) Time Value Operate (at nominal voltage) Maximum 8 ms Release (at nominal voltage) Maximum 4 ms Life Mechanical 5 × 10 6 operations minimum Electrical1 × 10 5 operations minimum (at contact rating) Other Vibration Misoperation Resistance Endurance 10 to 55 Hz (double amplitude of 1.65 mm) 100 m/s 2 (11 ±1 ms) Shock Misoperation Resistance Endurance Weight Approximately 4.3 g *1 10 to 55 Hz (double amplitude of 5.0 mm) 1,000 m/s 2 (6 ±1 ms) Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. JV SERIES n INSULATION Item Standard type Resistance (500VDC) Min. 1,000 MΩ Dielectric strength open contacts 750 VAC 1min. coil and contacts 5,000 VAC 1 min. Surge voltage High sensitivity type 10,000V 1.2 x 50µs standard wave n SAFETY STANDARD AND FILE NUMBERS Type Compliance Contact rating UL UL 508, UL 873, E56140 CSA C22.2 No. 14, LR35579 VDE 0435, 0631, 0700 Flammabiliaty: UL94V-0 (pastics) 5A, 250 VAC / 30 VDC (resistive) 1/8 HP, 125VAC/250VAC Pilot duty: C300 Also complies with SEMKO, CQC. Please contact sales office when SEMKO, CQC logo marking is neccessary on the cover. n REFERENCE DATA Timing 20 Time (ms) Time (ms) 12 8 0 JV-S type 16 16 4 Timing 20 JV type Operate 8 Operate 4 Release 0.1 12 Release 0.2 0.3 0.4 Coil power (W) 0.5 0.6 0 0.1 0.2 0.3 0.4 0.5 0.6 Coil power (W) JV SERIES Life Curve 300 Multiplying Factor Operation (x104) 200 120 VAC 100 250 VAC 30VDC AC120V cosø=0.7 50 AC250V cosø=0.7 30 20 10 30 VDC 5 120VAC cosø=0.4 3 2 1 250VAC cosø=0.4 30VDC 0 1 2 3 4 5 Contact Current (A) 250 n DIMENSIONS l Dimensions JV-KT type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) Unit: mm JV SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lRoHS-compliant now. Please refer to Lead-Free Status Info: (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. As of February 2005, Sn-3.0CuNi will be used for FTR-B3 and FTR-B4 series relays. l Relays that are RoHS compliant do not contain the hazardous materials that are restricted by the RoHS directive. Hazardous materials are cadmium, lead, mercury, chromium VI, PBB, PBDE including pentaBDE and octaBDE (with a concentration level <0.1%). Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l It has been verified that using lead-free relays in leaded assembly processes will not cause any problems (compatible). l “JEDEC STANDARD” and “LF” is marked on each outer and inner carton. (No marking on individual relays. Please refer to Lead Free Label Info). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l SnAgCu and SnCuNi solder have a low risk of tin whisker. No considerable length whisker was found by our in-house tests. 5. Solid State Relays l Each lead terminal will be changed from solder plating to Sn plating and Nickel plating. A layer of Nickel plating is between the terminal and Sn plating to avoid whisker. JV SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email:[email protected] Web: http://us.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. November 30, 2007