POWER RELAY 1 POLE—16 A (HEAVY POWER CONTROL) VSB SERIES RoHS compliant n FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, ÖVE, BSI recognized l Working class: C l Type of service: continuous duty l Heavy duty 16 A miniature power relay l UL Class B (130°C) insulation l High isolation in small package —Insulation distance: 8 mm —Dielectric strength: 5,000 VAC (between coil and contacts) —Surge strength: 10,000 V l Low power consumption and high sensitivity type available VSB-S) l Plastic sealed (with tape) type available l RoHS compliant since date code:0523 Please see page 6 for more information l l To be Di sc n ORDERING INFORMATION [Example] VSB – 12 S T B (a) (*) (b) (c) (d) (e) on ti (a) Series Name VSB: VSB Series (b) Nominal Voltage Refer to the COIL DATA CHART (c) Coil Type Nil : Standard type (700 to 750 mW) S : High sensitivity type (530 mW) (d) Contact Arrangement M : 1 form A (SPST-NO) T : 1 form C (SPDT) (e) Enclosure B C nu ed : Flux free type : Plastic sealed type (with tape) Note: Actual marking omits the hyphen (-) of (*) 1 VSB SERIES n COIL DATA CHART MODEL Nominal voltage Coil resistance (±10%) Must operate voltage* Must release voltage* Nominal power VSB- 3 ( ) ( ) 3 VDC 12.5 Ω 2.1 VDC 0.3 VDC 720 mW VSB- 5 ( ) ( ) 5 VDC 36 Ω 3.5 VDC 0.5 VDC 700 mW VSB- 6 ( ) ( ) 6 VDC 50 Ω 4.2 VDC 0.6 VDC 720 mW VSB- 9 ( ) ( ) 9 VDC 115 Ω 6.3 VDC 0.9 VDC 700 mW VSB- 12 ( ) ( ) 12 VDC 200 Ω 8.4 VDC 1.2 VDC 720 mW VSB- 14 ( ) ( ) 14 VDC 280 Ω 9.8 VDC 1.4 VDC 700 mW VSB- 18 ( ) ( ) 18 VDC 460 Ω 12.6 VDC 1.8 VDC 700 mW VSB- 24 ( ) ( ) 24 VDC 820 Ω 16.8 VDC 2.4 VDC 700 mW VSB- 36 ( ) ( ) 36 VDC 1,850 Ω 25.2 VDC 3.6 VDC 700 mW Standard Type To VSB- 48 ( ) ( ) 48 VDC 3,300 Ω 33.6 VDC 4.8 VDC 700 mW VSB- 60 ( ) ( ) 60 VDC 5,100 Ω 42.0 VDC 6.0 VDC 700 mW VSB-100 ( ) ( ) 100 VDC 13,400 Ω 70.0 VDC 10.0 VDC 750 mW VSB- 3S ( ) ( ) 3 VDC 17 Ω 0.3 VDC 530 mW VSB- 5S ( ) ( ) 5 VDC 47 Ω 3.5 VDC 0.5 VDC 530 mW VSB- 6S ( ) ( ) 6 VDC 68 Ω 4.2 VDC 0.6 VDC 530 mW VSB- 9S ( ) ( ) 9 VDC 6.3 VDC 0.9 VDC 530 mW VSB- 12S ( ) ( ) 12 VDC 8.4 VDC 1.2 VDC 530 mW VSB- 14S ( ) ( ) 14 VDC sc 2.1 VDC 9.8 VDC 1.4 VDC 530 mW VSB- 18S ( ) ( ) 18 VDC 610 Ω 12.6 VDC 1.8 VDC 530 mW VSB- 24S ( ) ( ) 24 VDC 1,100 Ω 2.4 VDC 530 mW VSB- 36S ( ) ( ) 36 VDC 2,450 Ω 25.2 VDC 3.6 VDC 530 mW VSB- 48S ( ) ( ) 48 VDC 4,400 Ω 33.6 VDC VSB- 60S ( ) ( ) 60 VDC 6,800 Ω 42.0 VDC VSB-100S ( ) ( ) 100 VDC 18,560 Ω 70.0 VDC High Sensitivity Type be Di 155 Ω 270 Ω 370 Ω Note: All values in the table are measured at 20°C. *: Specified values are subject to pulse wave voltage on ti 16.8 VDC nu ed 4.8 VDC 530 mW 6.0 VDC 530 mW 10.0 VDC 530 mW VSB SERIES n SPECIFICATIONS Item Standard Type VSB- ( ) High Sensitive type VSB-( )-S Contact Arrangement 1 form A (SPST- NO) or 1 form C (SPDT) Material Silver alloy (AgSnO) Configuration Single Resistance (initial) Maximum 100 mΩ at 1 A, 6 VDC Rating 16 A, 250 VAC / 30 VDC Maximum Carrying Current*1 16 A Maximum Switching Rating 4,000 VA / 480W Maximum Switching Voltage 250 VAC / 150VDC Maximum Switching Current 16A Maximum Switching Load*2 100 mA 5 VDC Nominal Power (at 20ºC) 700 to 750 mW 530 mW Operate Power (at 20ºC) 350 to 370 mW 260 mW Operating Temperature -40ºC to +65ºC (no frost) -40ºC to +75ºC (no frost) Time Value Operate (at nominal voltage) Maximum 15ms Life Mechanical To Coil be Electrical Other Di Release (at nominal voltage) Vibration Resistance Misoperation Shock Resistance Misoperation Endurance sc Endurance Weight Maximum 10ms 2 x 107 operations minimum on 1 x 105 operations minimum (contact rating) 10 to 55 Hz, at double amplitude of 1.5 mm 10 to 55Hz, at double amplitude of 1.5 mm ti Min. 100m/s2 (11±1ms) Min. 1,000m/s2 (6±1ms) Approximately 18g nu *1 Need to consider the head from PCB when max. current is more than 10A. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. n INSULATION ed Item VSB Note Resistance (initial) Minimum 1,000 MΩ at 500 VDC Dielectric Strength open contacts 1,000 VAC (50/60 Hz) 1 min. coil and contacts 5,000 VAC (50/60 Hz) 1 min. Surge Voltage (coil and contact) 10,000 V 1.2 x 50µs standard wave n SAFETY STANDARDS Type Compliance Contact rating UL UL 508, 873 Flammability: UL 94-V0 (plastics) E56140 16A, 250VAC/30VDC (resistive) 1/3 HP, 250VAC/125VAC Pilot duty: C150 CSA C22.2 No. 14 LR 35579 VDE 0435, 0631, 0700, 0860 Complies with SEV, SEMKO, FIMKO, ÖVE, BSI VSB SERIES n CHARACTERISTIC DATA To be n REFERENCE DATA Di sc on ti nu ed VSB SERIES n DIMENSIONS l Dimensions l PC board mounting hole layout (BOTTOM VIEW) VSB-M type To VSB type be Di sc VSB-MC type (Plastic sealed type with tape) on ti l Schematics (BOTTOM VIEW) nu ed VSB-C type (Plastic sealed type with tape) Unit: mm VSB SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fcai.fujitsu.com/pdf/LeadFreeLetter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward Sn-3.0Cu-Ni will be used for FTRB3 and FTR-B4 series relays. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 6 hazardous materials that are restricted by RoHS directive (lead, mercury, cadmium, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. We will ship leaded relays as long as the leaded relay inventory exists. l To be 2. Recommended Lead Free Solder Profile Recommended solder paste Sn-3.0Ag-0.5Cu and Sn-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from February 2005) l Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: Di maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. sc on ti nu ed We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity Moisture Sensitivity Level standard is not applicable to electromechanical realys. l 4. Tin Whisker SnAgCu solder is known as low riskof tin whisker. No considerable length whisker was found by our in-house test. l 5. Solid State Relays Each lead terminal will be changed from solder plating to Sn plating and Nickel plating. A layer of Nickel plating is between the terminal and the Sn plating to avoid whisker. l VSB SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com To Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ be Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Di Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. June 30, 2009 sc on ti nu ed