PD57030-E PD57030S-E RF POWER transistor, LdmoST plastic family N-channel enhancement-mode, lateral MOSFETs Features ■ Excellent thermal stability ■ Common source configuration ■ POUT = 30 W with 14dB gain @ 945 MHz / 28 V ■ New RF plastic package Description PowerSO-10RF (formed lead) The device is a common source N-channel, enhancement-mode lateral field-effect RF power transistor. It is designed for high gain, broad band commercial and industrial applications. It operates at 28 V in common source mode at frequencies up to 1 GHz. The device boasts the excellent gain, linearity and reliability of ST’s latest LDMOS technology mounted in the first true SMD plastic RF power package, PowerSO-10RF. Device’s superior linearity performance makes it an ideal solution for base station applications. The PowerSO-10 plastic package, designed to offer high reliability, is the first ST JEDEC approved, high power SMD package. It has been specially optimized for RF needs and offers excellent RF performance and ease of assembly. Mounting recommendations are available in www.st.com/rf/ (look for application note AN1294) PowerSO-10RF (straight lead) Figure 1. Pin connection Source Drain Gate Table 1. May 2010 Device summary Order code Package Packing PD57030-E PowerSO-10RF (formed lead) Tube PD57030S-E PowerSO-10RF (straight lead) Tube PD57030TR-E PowerSO-10RF (formed lead) Tape and reel PD57030STR-E PowerSO-10RF (straight lead) Tape and reel Doc ID 12613 Rev 2 1/18 www.st.com 18 Contents PD57030-E, PD57030S-E Contents 1 2 Electrical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.2 Dynamic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.3 Moisture sensitivity level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Typical performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4.1 PD57030S-E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2/18 Doc ID 12613 Rev 2 PD57030-E, PD57030S-E Electrical data 1 Electrical data 1.1 Maximum ratings Table 2. Absolute maximum ratings (TCASE = 25°C) Symbol Value Unit V(BR)DSS Drain-source voltage 65 V VGS Gate-source voltage ± 20 V 4 A Power dissipation (@ TC = 70°C) 52.8 W Max. operating junction temperature 165 °C -65 to +150 °C Value Unit 1.8 °C/W ID PDISS TJ TSTG 1.2 Parameter Drain current Storage temperature Thermal data Table 3. Symbol RthJC Thermal data Parameter Junction - case thermal resistance Doc ID 12613 Rev 2 3/18 Electrical characteristics 2 PD57030-E, PD57030S-E Electrical characteristics TCASE = +25 oC 2.1 Static Table 4. Static Symbol 2.2 Test conditions Max Unit VGS = 0 IDS = 10mA IDSS VGS = 0 VDS = 28 V 1 µA IGSS VGS = 20 V VDS = 0 1 µA VGS(Q) VDS = 28 V ID = 50 mA 5.0 V VDS(ON) VGS = 10 V ID = 3 A 1.3 V gFS VDS = 10 V ID = 3 A 1.8 mho CISS VGS = 0 VDS = 28 V f = 1 MHz 57 pF COSS VGS = 0 VDS = 28 V f = 1 MHz 30 pF CRSS VGS = 0 VDS = 28V f = 1 MHz 2.3 pF 65 V 2.0 Dynamic Dynamic Symbol Test conditions Min Typ Max Unit POUT VDS = 28 V IDQ = 50 mA f = 945 MHz 30 GP VDS = 28 V IDQ = 50 mA POUT = 30 W f = 945 MHz 13 14 dB ηD VDS = 28 V IDQ = 50 mA POUT = 30 W f = 945 MHz 45 53 % Load VDS = 28 V IDQ = 50 mA mismatch all phase angles POUT = 30 W f = 945 MHz 10:1 W VSWR Moisture sensitivity level Table 6. 4/18 Typ V(BR)DSS Table 5. 2.3 Min Moisture sensitivity level Test methodology Rating J-STD-020B MSL 3 Doc ID 12613 Rev 2 PD57030-E, PD57030S-E 3 Impedance Impedance Figure 2. Current conventions Table 7. Impedance data Freq. (MHz) ZIN (Ω) ZDL(Ω) 925 0.929 - j 0.315 2.60 + j 1.45 945 0.809 - j 0.085 2.46 + j 0.492 960 0.763 - j 0.428 2.35 + j 0.591 Doc ID 12613 Rev 2 5/18 Typical performance PD57030-E, PD57030S-E 4 Typical performance Figure 3. Capacitance vs supply voltage Figure 4. C (pF) Id (A) 100 5 Drain current vs gate source voltage Ciss 4 Coss 3 10 2 Crss 1 1 0 0 5 10 15 20 25 30 2 Vdd (V) Vgs (Normalized) 1.05 Id = 3A Id = 2.5A Id = 2A Id = 1.5A Id = 1A Id = 500mA 0.95 Id = 250mA Vds = 10V 0.9 -50 0 50 100 150 Tc (ºC) 6/18 4 5 Vgs (V) Gate-source voltage vs case temperature 1 3 Doc ID 12613 Rev 2 6 7 PD57030-E, PD57030S-E Typical performance 4.1 PD57030S-E Figure 5. Output power vs input power Figure 6. Pout (W) Input return loss vs output power IRL (dB) 50 5 945 MHz 0 40 925 MHz -5 960 MHz 30 -10 960 MHz -15 20 945 MHz -20 925 MHz 10 -25 Vdd = 28V Idq = 50mA Vdd = 28V Idq = 50mA 0 -30 0 0.5 1 1.5 2 0 10 20 Pin (W) Figure 7. Power gain vs output power Figure 8. Pg (dB) Eff (%) 18 70 16 30 40 50 Pout (W) Efficiency vs output power 925 MHz 60 945 MHz 960 MHz 14 960 MHz 50 12 925 MHz 945 MHz 10 40 8 30 6 Vdd = 28V Idq = 50mA Vdd = 28V Idq = 50mA 4 20 0 10 20 30 40 50 0 Pout (W) 10 20 30 40 50 Pout (W) Doc ID 12613 Rev 2 7/18 Typical performance Figure 9. PD57030-E, PD57030S-E Output power vs bias current Figure 10. Efficiency vs bias current Pout (W) Eff (%) 35 60 925 MHz 945 MHz 925 MHz 945 MHz 30 50 960 MHz 25 40 20 30 15 960 MHz 20 Pin = 29.1dBm Vdd = 28V Pin = 29.1dBm Vdd = 28V 10 10 0 100 200 300 400 500 0 100 200 Idq (mA) 300 400 500 Idq (mA) Figure 11. Output power vs drain voltage Figure 12. Efficiency vs drain voltage Pout (W) Eff (%) 35 60 925 MHz 945 MHz 945 MHz 30 50 960 MHz 925 MHz 25 960 MHz 40 20 30 15 20 10 Pin = 29.1dBm Idq = 50mA Pin = 29.1dBm Idq = 50mA 5 10 10 15 20 25 30 10 Vdd (V) 8/18 15 20 Vdd (V) Doc ID 12613 Rev 2 25 30 PD57030-E, PD57030S-E Typical performance Figure 13. Output power vs gate-source voltage Pout (W) 40 925 MHz 30 945 MHz 960 MHz 20 10 Pin = 29.1dBm Vdd = 28V 0 0 1 2 3 4 5 Vgs (V) Doc ID 12613 Rev 2 9/18 Test circuit 5 PD57030-E, PD57030S-E Test circuit Figure 14. Test circuit schematic =* * 5) , 1 Table 8. 10/18 =' ' 5) 2<7 Test circuit component part list Component Description C1, C8, C9, C13 47 pF ATC 100B Surface mount ceramic chip capacitor C2, C7 0.8-8.0 pF Giga trim variable capacitor C3, C4, C5, C6 7.5 pF ATC 100B surface mount ceramic chip capacitor C10 1000 pF ATC 100B surface mount ceramic chip capacitor C11, C15 0.1 µF / 500 V surface mount ceramic chip capacitor C12 10 µF / 50 V aluminum electrolytic radial lead capacitor C14 100 pF ATC 100B surface mount ceramic chip capacitor C16 220 µF / 63 V aluminum electrolytic radial lead capacitor R1 18 KΩ, 1 W surface mount chip resistor R2 4.7 MΩ, 1 W surface mount chip resistor R3 120 Ω, 2 W surface mount chip resistor FB1, FB2 Shield bead surface mount EMI L1, L2 Inductor, 5 turns air wound #22AWG, ID=0.059[1.49], nylon coated magnet wirE Doc ID 12613 Rev 2 PD57030-E, PD57030S-E Test circuit 4 inches Figure 15. Test circuit photomaster 3' 6 6.4 inches Figure 16. Test circuit Doc ID 12613 Rev 2 11/18 Package mechanical data 6 PD57030-E, PD57030S-E Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 12/18 Doc ID 12613 Rev 2 PD57030-E, PD57030S-E Table 9. Package mechanical data PowerSO-10RF formed lead (Gull Wing) mechanical data Dim. mm. Min. Typ. A1 0 0.05 A2 3.4 3.5 A3 1.2 1.3 A4 0.15 0.2 b 5.4 c D Inch Min. Typ. Max. 0.1 0. 0.0019 0.0038 3.6 0.134 0.137 0.142 1.4 0.046 0.05 0.054 0.25 0.005 0.007 0.009 5.53 5.65 0.212 0.217 0.221 0.23 0.27 0.32 0.008 0.01 0.012 9.4 9.5 9.6 0.370 0.374 0.377 a Max. 0.2 0.007 D1 7.4 7.5 7.6 0.290 0.295 0.298 E 13.85 14.1 14.35 0.544 0.555 0.565 E1 9.3 9.4 9.5 0.365 0.37 0.375 E2 7.3 7.4 7.5 0.286 0.292 0.294 E3 5.9 6.1 6.3 0.231 0.24 0.247 F 0.5 0.019 G 1.2 0.047 L 0.8 1 1.1 R1 0.039 0.25 R2 2 deg 0.042 0.01 0.8 T 0.031 5 deg 8 deg 2 deg 5 deg T1 6 deg 6 deg T2 10 deg 10 deg 8 deg Resin protrusions not included (max value: 0.15 mm per side) Figure 17. Package dimensions )O , -# & % % % - % ' 2 5 4 4 , 2 2 ! $ 3EEDETAIL+ $ETAIL+ 3CALE 4 , 3EEDETAIL+ # 2 4 ! ! 4 $ 'AUGEPLANE ! Note: 0.030 2 Critical dimensions: - Stand-off (A1) - Overall width (L) $ETAIL+ 3CALE Doc ID 12613 Rev 2 13/18 Package mechanical data Table 10. PD57030-E, PD57030S-E PowerSO-10RF straight lead mechanical data Dim. mm. Inch Min. Typ. Max. Min. Typ. Max. A1 1.62 1.67 1.72 0.064 0.065 0.068 A2 3.4 3.5 3.6 0.134 0.137 0.142 A3 1.2 1.3 1.4 0.046 0.05 0.054 A4 0.15 0.2 0.25 0.005 0.007 0.009 a 0.2 0.007 b 5.4 5.53 5.65 0.212 0.217 0.221 c 0.23 0.27 0.32 0.008 0.01 0.012 D 9.4 9.5 9.6 0.370 0.374 0.377 D1 7.4 7.5 7.6 0.290 0.295 0.298 E 15.15 15.4 15.65 0.595 0.606 0.615 E1 9.3 9.4 9.5 0.365 0.37 0.375 E2 7.3 7.4 7.5 0.286 0.292 0.294 E3 5.9 6.1 6.3 0.231 0.24 0.247 F 0.5 0.019 G 1.2 0.047 R1 Note: 0.25 0.01 R2 0.8 0.031 T1 6 deg 6 deg T2 10 deg 10 deg Resin protrusions not included (max value: 0.15 mm per side) Figure 18. Package dimensions 5 )O , -# ! 2 4 4 & # , % % % - % ' 2 2 ! $ ! ! 2 4 4 14/18 2 $ Doc ID 12613 Rev 2 CRITICAL DIMENSIONS: - Overall width (L) PD57030-E, PD57030S-E Package mechanical data Figure 19. Tube information Doc ID 12613 Rev 2 15/18 Package mechanical data PD57030-E, PD57030S-E Figure 20. Reel information 16/18 Doc ID 12613 Rev 2 PD57030-E, PD57030S-E 7 Revision history Revision history Table 11. Document revision history Date Revision Changes 07-Aug-2006 1 Initial release. 28-May-2010 2 Added: Table 6: Moisture sensitivity level. Doc ID 12613 Rev 2 17/18 PD57030-E, PD57030S-E Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18 Doc ID 12613 Rev 2