STMICROELECTRONICS STD2NK90Z-1

STP2NK90Z - STD2NK90Z
STD2NK90Z-1
N-channel 900V - 5Ω - 2.1A - TO-220 /DPAK/IPAK
Zener-Protected SuperMESH™ MOSFET
General features
Type
VDSS
RDS(on)
(@Tjmax)
ID
PW
STD2NK90Z
900V
<6.5Ω
2.1A
70W
STD2NK90Z-1
900V
<6.5Ω
2.1A
70W
STP2NK90Z
900V
<6.5Ω
2.1A
70W
■
Extremely high dv/dt capability
■
Improved esd capability
■
100% avalanche rated
■
Gate charge minimized
■
Very low intrinsic capacitances
■
Very good manufacturing repeatibility
3
3
1
1
2
TO-220
DPAK
3
2
1
IPAK
Internal schematic diagram
Description
The SuperMESH™ series is obtained through an
extreme optimization of ST’s well established
stripbased PowerMESH™ layout. In addition to
pushing on-resistance significantly down, special
care is taken to ensure a very good dv/dt
capability for the most demanding applications.
Such series complements ST full range of high
voltage MOSFETs including revolutionary
MDmesh™ products.
Applications
■
Switching application
Order codes
Part number
Marking
Package
Packaging
STD2NK90ZT4
D2NK90Z
DPAK
Tape & reel
STD2NK90Z-1
D2NK90Z
IPAK
Tube
STP2NK90Z
P2NK90Z
TO-220
Tube
July 2006
Rev 4
1/18
www.st.com
18
Contents
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1
2
Protection features of gate-to-source zener diodes . . . . . . . . . . . . . . . . . . 4
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1
Electrical characteristics (curves)
............................ 7
3
Test circuit
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5
Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
1
Electrical ratings
Electrical ratings
Table 1.
Absolute maximum ratings
Symbol
Parameter
Value
STD2NK90Z
STP2NK90Z
VDS
Unit
STD2NK90Z-1
Drain-source voltage (VGS = 0)
900
V
Drain-gate voltage (RGS = 20 kΩ)
900
V
Gate- source Voltage
± 30
V
ID
Drain current (continuous) at TC = 25°C
2.1
A
ID
Drain current (continuous) at TC = 100°C
1.3
A
Drain current (pulsed)
8.4
A
Total dissipation at TC = 25°C
70
W
Derating factor
0.56
W/°C
VESD(G-S)
Gate source ESD(HBM-C=100pF,
R=1.5KΩ)
2000
V
dv/dt (2)
Peak diode recovery voltage slope
4.5
V/ns
-55 to 150
-55 to 150
°C
°C
VDGR
VGS
IDM
(1)
PTOT
Tj
Tstg
Operating junction temperature
Storage temperature
1. Pulse width limited by safe operating area
2.
ISD ≤2.1A, di/dt ≤200A/µs, VDD ≤V(BR)DSS, Tj ≤TJMAX.
Table 2.
Symbol
Thermal data
Value
Unit
Rthj-case Thermal resistance junction-case max
1.78
°C/W
Rthj-amb Thermal resistance junction-ambient max
Tl
Maximum lead temperature for soldering purpose
62.5
300
°C/W
°C
Value
Unit
Table 3.
Symbol
Parameter
Avalanche characteristics
Parameter
IAR
Avalanche current, repetitive or not-repetitive
(pulse width limited by Tj max)
2.1
A
EAS
Single pulse avalanche energy
(starting Tj = 25 °C, ID = IAR, VDD = 50 V)
150
mJ
3/18
Electrical ratings
Table 4.
Symbol
BVGSO
1.1
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
Gate-source zener diode
Parameter
Gate-source breakdown voltage
Test conditions
Min.
Igs=± 1mA (open drain)
30
Typ. Max. Unit
V
Protection features of gate-to-source zener diodes
The built-in back-to-back Zener diodes have specifically been designed to enhance not only
the device’s ESD capability, but also to make them safely absorb possible voltage transients
that may occasionally be applied from gate to source. In this respect the Zener voltage is
appropriate to achieve an efficient and cost-effective intervention to protect the device’s
integrity. These integrated Zener diodes thus avoid the usage of external components.
4/18
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
2
Electrical characteristics
Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 5.
Symbol
V(BR)DSS
On/off states
Parameter
Drain-source breakdown
Voltage
Test condictions
ID = 1 mA, VGS = 0
Zero gate voltage
Drain current (VGS = 0)
IGSS
Gate-body Leakage
current (VDS = 0)
VGS = ± 20 V
VGS(th)
Gate threshold voltage
VDS = VGS, ID = 50 µA
RDS(on
Static drain-source on
resistance
VGS = 10 V, ID = 1.05 A
Symbol
gfs (1)
Ciss
Coss
Crss
Qg
Qgd
Max.
Unit
900
V
1
50
µA
µA
± 10
µA
3.75
4.5
V
5
6.5
Ω
Typ.
Max.
Unit
VDS = Max Rating, TC = 125°C
3
Dynamic
Parameter
Forward transconductance
Input capacitance
Output capacitance
Reverse transfer
capacitance
Coss eq(2). Equivalent output
capacitance
Qgs
Typ.
VDS = Max Rating
IDSS
Table 6.
Min.
Total gate charge
Gate-source charge
Gate-drain charge
Test condictions
Min.
VDS = 15 V , ID = 1.05 A
VDS = 25 V, f = 1 MHz,
VGS = 0
VGS = 0 V, VDS = 0 to 720 V
VDD = 720 V, ID = 2 A,
2.3
S
485
50
10
pF
pF
pF
24
pF
19.5
3.4
10.8
VGS = 10 V
(see Figure 22)
27
nC
nC
nC
1. Pulsed: pulse duration=300µs, duty cycle 1.5%
2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS
inceases from 0 to 80% VDSS
Table 7.
Symbol
td(on)
tr
td(off)
tf
Switching times
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Test condictions
VDD = 450 V, ID = 1 A,
RG = 4.7 Ω, VGS = 10 V
(see Figure 19)
Min.
Typ.
21
11
43
40
Max.
Unit
ns
ns
ns
ns
5/18
Electrical characteristics
Table 8.
Symbol
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
Source drain diode
Max
Unit
Source-drain current
2.1
A
ISDM(1)
Source-drain current (pulsed)
8.4
A
VSD(2)
Forward on voltage
ISD = 2.1 A, VGS = 0
1.6
V
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD = 2 A, di/dt = 100 A/µs
VDD = 50V
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD = 2 A, di/dt = 100 A/µs
VDD = 50V, Tj = 150°C
ISD
trr
Qrr
IRRM
trr
Qrr
IRRM
Parameter
Test condictions
(see Figure 20)
(see Figure 20)
1. Pulse width limited by safe operating area
2. Pulsed: pulse duration=300µs, duty cycle 1.5%
6/18
Min
Typ.
415
1.5
7.2
ns
µC
A
515
1.9
7.5
ns
µC
A
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
Electrical characteristics
2.1
Electrical characteristics (curves)
Figure 1.
Safe operating area for TO-220/
DPAK/ D²PAK
Figure 2.
Thermal impedance for TO-220/
DPAK/ D²PAK
Figure 3.
Safe operating area for TO-220FP
Figure 4.
Thermal impedance for TO-220FP
Figure 5.
Output characterisics
Figure 6.
Transfer characteristics
7/18
Electrical characteristics
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
Figure 7.
Transconductance
Figure 9.
Gate charge vs gate-source voltage Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage
vs temperature
8/18
Figure 8.
Static drain-source on resistance
Figure 12. Normalized on resistance vs
temperature
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
Figure 13. Source-drain diode forward
characteristics
Electrical characteristics
Figure 14. Normalized BVDSS vs temperature
Figure 15. Maximum avalanche energy vs
temperature
9/18
Test circuit
3
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
Test circuit
Figure 16. Switching times test circuit for
resistive load
Figure 17. Gate charge test circuit
Figure 18. Test circuit for inductive load
Figure 19. Unclamped Inductive load test
switching and diode recovery times
circuit
Figure 20. Test circuit for inductive load
switching and diode recovery times
10/18
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
4
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
11/18
Package mechanical data
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
TO-220 MECHANICAL DATA
DIM.
mm.
MIN.
inch
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
b
0.61
0.88
0.024
0.034
b1
1.15
1.70
0.045
0.066
c
0.49
0.70
0.019
0.027
D
15.25
15.75
0.60
0.620
E
10
10.40
0.393
0.409
e
2.40
2.70
0.094
0.106
e1
4.95
5.15
0.194
0.202
F
1.23
1.32
0.048
0.052
H1
6.20
6.60
0.244
0.256
J1
2.40
2.72
0.094
0.107
0.551
L
13
14
0.511
L1
3.50
3.93
0.137
L20
16.40
L30
12/18
TYP
0.154
0.645
28.90
1.137
øP
3.75
3.85
0.147
0.151
Q
2.65
2.95
0.104
0.116
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
Package mechanical data
TO-251 (IPAK) MECHANICAL DATA
mm
DIM.
MIN.
inch
TYP.
MAX.
MIN.
TYP.
MAX.
A
2.2
2.4
0.086
0.094
A1
0.9
1.1
0.035
0.043
A3
0.7
1.3
0.027
0.051
B
0.64
0.9
0.025
0.031
B2
5.2
5.4
0.204
0.212
B3
0.85
B5
0.033
0.3
0.012
B6
0.95
C
0.45
C2
0.48
D
6
E
6.4
6.6
0.037
0.6
0.017
0.023
0.6
0.019
0.023
6.2
0.236
0.244
0.252
0.260
G
4.4
4.6
0.173
0.181
H
15.9
16.3
0.626
0.641
L
9
9.4
0.354
0.370
L1
0.8
1.2
0.031
0.047
L2
0.8
1
0.031
0.039
A1
C2
A3
A
C
H
B
B3
=
1
=
2
G
=
=
=
E
B2
=
3
B5
L
D
B6
L2
L1
0068771-E
13/18
Package mechanical data
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
DPAK MECHANICAL DATA
mm.
inch
DIM.
MIN.
A
A1
A2
B
b4
C
C2
D
D1
E
E1
e
e1
H
L
(L1)
L2
L4
R
V2
TYP
2.2
0.9
0.03
0.64
5.2
0.45
0.48
6
MAX.
MIN.
2.4
1.1
0.23
0.9
5.4
0.6
0.6
6.2
0.086
0.035
0.001
0.025
0.204
0.017
0.019
0.236
6.6
0.252
5.1
6.4
0.260
0.173
0.368
0.039
2.8
0.8
0.181
0.397
0.110
0.031
1
0.023
0.2
0°
0.094
0.043
0.009
0.035
0.212
0.023
0.023
0.244
0.185
0.090
4.6
10.1
0.6
MAX.
0.200
4.7
2.28
4.4
9.35
1
TYP.
0.039
0.008
8°
0°
8°
0068772-F
14/18
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
5
Packing mechanical data
Packing mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
24.4
N
100
T
TAPE MECHANICAL DATA
DIM.
mm
inch
MIN.
MAX.
MIN.
A0
10.5
10.7
0.413 0.421
B0
15.7
15.9
0.618 0.626
D
1.5
1.6
0.059 0.063
D1
1.59
1.61
0.062 0.063
E
1.65
1.85
0.065 0.073
F
11.4
11.6
0.449 0.456
K0
4.8
5.0
0.189 0.197
P0
3.9
4.1
0.153 0.161
P1
11.9
12.1
0.468 0.476
P2
1.9
2.1
0.075 0.082
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
26.4
0.960 1.039
0.059
0795
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
1000
MAX.
R
50
1.574
T
0.25
0.35 0.0098 0.0137
W
23.7
24.3
0.933 0.956
* on sales type
15/18
Packing mechanical data
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
16.4
N
50
T
TAPE MECHANICAL DATA
DIM.
mm
MIN.
MAX.
A0
6.8
7
0.267 0.275
B0
10.4
10.6
0.409 0.417
B1
D
16/18
inch
1.5
D1
1.5
E
1.65
MIN.
MAX.
12.1
0.476
1.6
0.059 0.063
1.85
0.065 0.073
0.059
F
7.4
7.6
0.291 0.299
K0
2.55
2.75
0.100 0.108
0.153 0.161
P0
3.9
4.1
P1
7.9
8.1
0.311 0.319
P2
1.9
2.1
0.075 0.082
R
40
W
15.7
1.574
16.3
0.618
0.641
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
18.4
0.645 0.724
0.059
0.795
1.968
22.4
0.881
BASE QTY
BULK QTY
2500
2500
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
6
Revision history
Revision history
Table 9.
Revision history
Date
Revision
Changes
06-Oct-2004
1
First version
08-Sep-2005
2
Complete version
05-Mar-2006
3
Inserted Ecopack indication
27-Jul-2006
4
New template, no content change
17/18
STP2NK90Z - STD2NK90Z - STD2NK90Z-1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
18/18