STD5NK52ZD, STB5NK52ZD-1 STF5NK52ZD,STP5NK52ZD N-channel 520 V,1.22 Ω,4.4 A,TO-220,IPAK,I2PAK,DPAK,TO-220FP Zener-protected SuperMESH™ Power MOSFET Features Type VDSS RDS(on) max ID Pw STB5NK52ZD-1 520 V < 1.5 Ω 4.4 A 70 W STD5NK52ZD-1 520 V < 1.5 Ω 4.4 A 70 W STD5NK52ZD 520 V < 1.5 Ω 4.4 A 70 W STF5NK52ZD 520 V < 1.5 Ω 4.4 A 25 W STP5NK52ZD 520 V < 1.5 Ω 4.4 A 70 W ■ +2#- ■ Gate charge minimized ■ Very low intrinsic capacitances ■ Very good manufacturing repeatability ■ Improved ESD capability &2#- 61 Extremely high dv/dt capability 100% avalanche tested ■ +2#- 61(2 Figure 1. Internal schematic diagram D(2) Application ■ Switching applications G(1) Description The SuperFREDMesh™ series associates all advantages of reduced on-resistance, zener gate protection and very high dv/dt capability with a fast body-drain recovery diode. Such series complements the “FDmesh™” advanced technology. Table 1. S(3) AM01476v1 Device summary Order codes Marking Package Packaging STB5NK52ZD-1 B5NK52ZD I²PAK Tube STD5NK52ZD-1 D5NK52ZD IPAK Tube STD5NK52ZD D5NK52ZD DPAK Tape and reel STF5NK52ZD F5NK52ZD TO-220FP Tube STP5NK52ZD P5NK52ZD TO-220 Tube September 2008 Rev 5 1/17 www.st.com 17 Contents STB5NK52ZD-1, STD/F/P5NK52ZD Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2/17 .............................................. 9 STB5NK52ZD-1, STD/F/P5NK52ZD 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter TO-220 IPAK I²PAK DPAK VDS Drain-source voltage (VGS = 0) 520 VGS Gate- source voltage ± 30 ID Drain current (continuous) at TC = 25 °C Unit TO-220FP V V 4.4 4.4 (1) A (1) A Drain current (continuous) at TC = 100 °C 2.7 2.7 IDM (2) Drain current (pulsed) 17.6 17.6 (1) A PTOT Total dissipation at TC = 25 °C 70 25 W 0.56 0.2 W/°C ID Derating factor VESD(G-S) Gate source ESD(HBM-C=100pF, R=1.5 kΩ) dv/dt (3) Tj Tstg 2800 V 15 V/ns -55 to 150 °C Peak diode recovery voltage slope Operating junction temperature Storage temperature 1. Limited only by max temperature allowed 2. Pulse width limited by safe operating area 3. ISD ≤ 4.4 A, di/dt ≤ 200 A/µs, VDD = 80% V(BR)DSS Table 3. Thermal data Value Symbol Parameter TO-220 IPAK I²PAK DPAK Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-ambient max Tl Table 4. Symbol Maximum lead temperature for soldering purpose Unit TO-220FP 1.78 62.5 100 5 °C/W 62.5 °C/W 300 °C Max value Unit Avalanche characteristics Parameter IAR Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) 4.4 A EAS Single pulse avalanche energy (starting Tj = 25 °C, ID = IAR, VDD = 50 V) 170 mJ 3/17 Electrical characteristics 2 STB5NK52ZD-1, STD/F/P5NK52ZD Electrical characteristics (Tcase =25°C unless otherwise specified) Table 5. Symbol V(BR)DSS On /off states Parameter Drain-source breakdown voltage Test conditions ID = 1 mA, VGS = 0 IDSS VDS = Max rating Zero gate voltage drain current (VGS = 0) VDS = Max rating, TC=125 °C IGSS Gate-body leakage current (VDS = 0) Gate threshold voltage VDS = VGS, ID = 50 µA RDS(on Static drain-source on resistance Symbol gfs Ciss Coss Crss COSS eq(1) Qg Qgs Qgd Typ. Max. Unit 520 V 1 50 µA µA ± 10 µA 3.75 4.5 V 1.22 1.5 Ω Typ. Max. Unit VGS = ± 20 V VGS(th) Table 6. Min. 2.5 VGS = 10 V, ID = 2.2 A Dynamic Parameter Forward transconductance Test conditions Min. VDS = 15 V, ID = 2.2 A 3.1 S Input capacitance Output capacitance Reverse transfer capacitance VDS = 25 V, f = 1 MHz, VGS = 0 529 71 13.4 pF pF pF Equivalent output capacitance VGS = 0, VDS = 0 to 416 V 11 pF Total gate charge Gate-source charge Gate-drain charge VDD = 416 V, ID = 4.4 A, VGS = 10 V (see Figure 19) 16.9 4.2 8.4 nC nC nC 1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 4/17 STB5NK52ZD-1, STD/F/P5NK52ZD Table 7. Switching times Symbol Parameter td(on) tr td(off) tf Table 8. ISD Source-drain current Source-drain current (pulsed) VSD (2) trr Qrr IRRM trr Qrr IRRM Min. Typ. Max Unit 11.4 13.6 23.1 15 VDD = 260 V, ID = 2.2 A, RG = 4.7 Ω, VGS = 10 V (see Figure 18) ns ns ns ns Source drain diode Parameter ISDM Test conditions Turn-on delay time Rise time Turn-off-delay time Fall time Symbol (1) Electrical characteristics Test conditions Min. Typ. Max. Unit 4.4 17.6 A A 1.6 V Forward on voltage ISD = 4.4 A, VGS = 0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 4.4 A, di/dt = 100 A/µs VDD = 60 V (see Figure 23) 97.7 300 5.9 ns nC A Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 4.4 A, di/dt = 100 A/µs VDD = 60 V, Tj = 150 °C (see Figure 23) 139 500 7.2 ns nC A 1. Pulse width limited by safe operating area 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5% Table 9. Symbol BVGSO(1) Gate-source Zener diode Parameter Gate-source breakdown voltage Test conditions Igs=± 1 mA (open drain) Min Typ Max Unit 30 V 1. The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the usage of external components 5/17 Electrical characteristics STB5NK52ZD-1, STD/F/P5NK52ZD 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220 / I²PAK Figure 3. Thermal impedance for TO-220 / I²PAK Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for IPAK/DPAK Figure 7. 6/17 Thermal impedance for IPAK/DPAK STB5NK52ZD-1, STD/F/P5NK52ZD Figure 8. Output characteristics Figure 10. Normalized BVDSS vs temperature Electrical characteristics Figure 9. Transfer characteristics Figure 11. Static drain-source on resistance Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations 7/17 Electrical characteristics STB5NK52ZD-1, STD/F/P5NK52ZD Figure 14. Normalized gate threshold voltage vs temperature Figure 15. Normalized on resistance vs temperature Figure 16. Source-drain diode forward characteristics Figure 17. Maximum avalanche energy vs temperature 8/17 STB5NK52ZD-1, STD/F/P5NK52ZD 3 Test circuits Test circuits Figure 18. Switching times test circuit for resistive load Figure 19. Gate charge test circuit VDD 12V 47kΩ 1kΩ 100nF 3.3 µF 2200 RL µF VGS IG=CONST VDD 100Ω Vi=20V=VGMAX VD RG 2200 µF D.U.T. D.U.T. VG 2.7kΩ PW 47kΩ 1kΩ PW AM01468v1 AM01469v1 Figure 20. Test circuit for inductive load Figure 21. Unclamped Inductive load test switching and diode recovery times circuit A A D.U.T. FAST DIODE B B L A D G VD L=100µH S 3.3 µF B 25 Ω 1000 µF D VDD 2200 µF 3.3 µF VDD ID G RG S Vi D.U.T. Pw AM01470v1 Figure 22. Unclamped inductive waveform AM01471v1 Figure 23. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 0 10% AM01473v1 9/17 Package mechanical data 4 STB5NK52ZD-1, STD/F/P5NK52ZD Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/17 STB5NK52ZD-1, STD/F/P5NK52ZD Package mechanical data TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q Typ 4.40 0.61 1.14 0.48 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 11/17 Package mechanical data STB5NK52ZD-1, STD/F/P5NK52ZD TO-220FP mechanical data mm. Dim. Min. A 4.40 inch Typ Max. Min. 4.60 0.173 Typ. 0.181 Max. B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.017 0.027 F 0.75 1.00 0.030 0.039 F1 1.15 1.50 0.045 0.067 F2 1.15 1.50 0.045 0.067 G 4.95 5.20 0.195 0.204 G1 2.40 2.70 0.094 0.106 H 10 10.40 0.393 L2 16 0.409 0.630 28.6 30.6 1.126 L4 9.80 10.60 0.385 1.204 0.417 L5 2.9 3.6 0.114 0.141 L6 15.90 16.40 0.626 0.645 L7 9 9.30 0.354 0.366 Dia 3 3.2 0.118 0.126 B D A E L3 L3 L6 F2 H G G1 Dia F F1 L7 L2 L5 1 2 3 L4 7012510-I 12/17 STB5NK52ZD-1, STD/F/P5NK52ZD Package mechanical data TO-251 (IPAK) mechanical data mm. DIM. min. typ max. A 2.20 2.40 A1 0.90 1.10 b 0.64 0.90 5.20 5.40 b2 b4 0.95 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 E 6.40 e e1 6.60 2.28 4.40 H 4.60 16.10 L 9.00 9.40 (L1) 0.80 1.20 L2 0.80 V1 10 o 0068771_H 13/17 Package mechanical data STB5NK52ZD-1, STD/F/P5NK52ZD TO-252 (DPAK) mechanical data DIM. mm. min. typ max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 D1 E 6.20 5.10 6.40 E1 6.60 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 L1 2.80 L2 L4 0.80 0.60 R V2 1 0.20 0o 8o 0068772_G 14/17 STB5NK52ZD-1, STD/F/P5NK52ZD 5 Packaging mechanical data Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 D 1.5 D1 1.5 E 1.65 MIN. 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 7.4 7.6 0.291 0.299 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 40 15.7 MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 0.059 F R MIN. MAX. K0 W inch MAX. 1.574 16.3 0.618 0.641 15/17 Revision history 6 STB5NK52ZD-1, STD/F/P5NK52ZD Revision history Table 10. 16/17 Document revision history Date Revision Changes 16-Jun-2005 1 First release 06-Sep-2005 2 Inserted ecopack indication 03-Oct-2005 3 Corrected value on Table 2 23-Mar-2006 4 Complete version. New template 15-Sep-2008 5 Inserted new package: TO-220FP STB5NK52ZD-1, STD/F/P5NK52ZD Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17