STMICROELECTRONICS VND10N06-1

VND10N06
VND10N06-1
"OMNIFET"
fully autoprotected Power MOSFET
Features
Max on-state resistance (per ch.)
Current limitation (typ)
Drain-Source clamp voltage
RDS(on)
0.3Ω
Ilim
10A
VCLAMP
60V
■
Linear current limitation
■
Thermal shutdown
■
Short circuit protection
■
Integrated clamp
■
Low current drawn from input pin
■
Logic level input threshold
■
ESD protection
■
Schmitt trigger on input
■
High noise immunity
Table 1.
3
3
2
1
DPAK
TO-252
1
IPAK
TO-251
Description
The VND10N06 and VND10N06-1 are monolithic
devices designed in STMicroelectronics VIPower
M0-2 technology, intended for replacement of
standard Power MOSFETs in DC to 50KHz
applications. Built in thermal shutdown, linear
current limitation and overvoltage clamp protect
the chip in harsh environments.
Device summary
Order codes
Package
Tube
Tape and reel
DPAK
VND10N06
VND10N06TR
IPAK
VND10N06-1
December 2008
Rev 3
1/25
www.st.com
25
Contents
VND10N06 / VND10N06-1
Contents
1
Block diagram and pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2
Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.2
Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.4
Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3
Protection features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4
Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5
Package and packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6
2/25
5.1
ECOPACK® packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.2
DPAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.3
IPAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.4
DPAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.5
IPAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
VND10N06 / VND10N06-1
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Dynamic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Source Drain diode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Protections (-40°C < Tj < 150°C, unless otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . 8
DPAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
IPAK mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3/25
List of figures
VND10N06 / VND10N06-1
List of figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Figure 11.
Figure 12.
Figure 13.
Figure 14.
Figure 15.
Figure 16.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Figure 21.
Figure 22.
Figure 23.
Figure 24.
Figure 25.
Figure 26.
Figure 27.
Figure 28.
Figure 29.
Figure 30.
Figure 31.
Figure 32.
Figure 33.
4/25
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Switching waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Switching time test circuit for resistive load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Test circuit for inductive load switching and diode recovery time . . . . . . . . . . . . . . . . . . . . . 9
Unclamped inductive load test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Input charge test circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Unclamped inductive waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Static Drain-Source on resistance (VIN = 3.5V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Static Drain-Source on resistance (VIN = 5V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Derating curve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Static Drain-Source on resistance vs. input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Current limit Vs. junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Source-Drain diode voltage Vs. junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Step response current limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Switching time resistive load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Turn-on current slope (VIN = 3.5V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Turn-on current slope (VIN = 7V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Input voltage Vs. input charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Turn-off Drain-Source voltage slope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Turn-off Drain-Source voltage slope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Capacitance variations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Switching time resistive load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Normalized on resistance Vs. temperature (VIN = 7V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Output characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Normalized on resistance Vs. temperature (VIN = 3.5V). . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Normalized input threshold voltage Vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Thermal impedance for DPAK / IPAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DPAK package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
IPAK mechanical data and package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DPAK footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DPAK tube shipment (no suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DPAK tape and reel shipment (suffix “TR”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
IPAK tube shipment (no suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
VND10N06 / VND10N06-1
1
Block diagram and pin description
Block diagram and pin description
Figure 1.
Block diagram
5/25
Electrical specifications
VND10N06 / VND10N06-1
2
Electrical specifications
2.1
Absolute maximum ratings
Stressing the device above the rating listed in the “Absolute maximum ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied. Exposure to Absolute maximum rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
program and other relevant quality document.
Table 2.
Absolute maximum ratings
Symbol
Unit
Drain-Source voltage (Vin = 0V)
Internally clamped
V
VINn
Input voltage
Internally clamped
V
Iin
Input current
± 20
mA
IDn
Drain current
Internally limited
A
IRn
Reverse DC output current
- 15
A
Electrostatic discharge
(R = 1.5KΩ, C = 100pF)
4000
V
35
W
Ptot
Total dissipation at Tc = 25°C
Tj
Operating junction temperature
Internally limited
°C
Tc
Case operating temperature
Internally limited
°C
- 55 to 150
°C
Tstg
Storage temperature
Thermal data
Table 3.
6/25
Value
VDSn
VESD
2.2
Parameter
Thermal data
Symbol
Parameter
Max. value
Unit
Rthj-case
Thermal resistance junction-case
3.5
°C/W
Rthj-amb
Thermal resistance junction-ambient
100
°C/W
VND10N06 / VND10N06-1
2.3
Electrical specifications
Electrical characteristics
Tcase = 25 °C unless otherwise stated.
Table 4.
Symbol
VCLAMP
Off
Parameter
Drain-Source clamp
voltage
Test conditions
VIN = 0V; ID = 200mA
VIL
Input low level voltage ID = 100 µA; VDS = 16 V
VIH
Input high Level
voltage
RL = 27Ω; VDD = 16 V
VDS = 0.5 V
IISS
Supply current from
input pin
VDS = 0V; VIN = 5V
VINCL
Input-Source reverse
clamp voltage
IIN = -1mA
IIN = 1mA
IDSS
Zero input voltage
drain current
(VIN = 0V)
VDS = 50V; VIN = VIL;
VDS < 35V; VIN = VIL
Table 5.
Switching(1)
Symbol
Parameter
td(on)
tr
td(off)
tf
td(on)
tr
td(off)
tf
(di/dt)on
Qi
Test conditions
Min.
Typ.
Max.
Unit
50
60
70
V
1.5
V
3.2
150
Turn-off delay time
Min.
VDD = 16V; ID = 1A
Vgen = 7V; Rgen = 10Ω
(see Figure 2)
Fall time
Turn-on delay time
Rise time
Turn-off delay time
300
µA
-0.3
11
V
V
250
100
µA
µA
Typ.
Max.
Unit
1100
1600
ns
550
900
ns
200
400
ns
100
200
ns
1.2
1.8
µs
1
1.5
µs
1.6
2.3
µs
1.2
1.8
µs
-1
8
Turn-on delay time
Rise time
V
VDD = 16V; ID = 1A
Vgen = 7V; Rgen = 1000Ω
(see Figure 2)
Fall time
Turn-on current slope
VDD = 16V; ID = 1A
Vin = 7V; Rgen = 10Ω
1.5
A/µs
Total input charge
VDD = 12V; ID = 1A; VIN = 7V
13
nC
1. Parameters guaranteed by design / characterization.
Table 6.
Symbol
RDS(on)
On(1)
Parameter
Static Drain-Source
on resistance
Test conditions
VIN = 7V; ID = 1 A; Tj < 125 °C
Min.
Typ.
Max.
Unit
0.15
0.3
Ω
1. Pulsed: pulse duration = 300µs, duty cycle 1.5%.
7/25
Electrical specifications
Table 7.
Symbol
COSS
Table 8.
Symbol
VSD(1)
trr
(2)
VND10N06 / VND10N06-1
Dynamic
Parameter
Output capacitance
Test conditions
Min.
VDS = 13V; f = 1MHz; VIN = 0V
Typ.
Max.
Unit
350
500
pF
Typ.
Max.
Unit
0.8
1.6
V
Source Drain diode
Parameter
Forward on voltage
Test conditions
Min.
ISD = 1 A; VIN = VIL
Reverse recovery time
Qrr(2)
Reverse recovery
charge
IRRM(2)
Reverse recovery
current
ISD = 1A; di/dt = 100 A/µs
VDD = 30V; Tj = 25°C
(see Figure 4)
125
ns
0.22
µC
3.5
A
1. Pulsed: pulse duration = 300µs, duty cycle 1.5%.
2. Parameters guaranteed by design / characterization.
Table 9.
Symbol
Protections (-40°C < Tj < 150°C, unless otherwise specified)
Parameter
Test conditions
Typ.
Max.
Unit
6
10
15
A
12
20
µs
Drain current limit
VIN = 7V; VDS=13V
tdlim(1)
Step response current
limit
VIN = 7 V; VDS step from 0 to 13V
Tjsh(1)
Overtemperature
shutdown
150
°C
Tjrs(1)
Overtemperature reset
135
°C
Eas (1)
Single pulse
avalanche energy
250
mJ
Ilim
Starting Tj = 25°C; VDD = 24V
VIN = 7V Rgen = 1kΩ; L = 10mH
1. Parameters guaranteed by design / characterization.
Figure 2.
8/25
Min.
Switching waveforms
VND10N06 / VND10N06-1
Electrical specifications
Figure 3.
Switching time test circuit for resistive load
Figure 4.
Test circuit for inductive load switching and diode recovery time
9/25
Electrical specifications
Figure 5.
VND10N06 / VND10N06-1
Unclamped inductive load test circuits
RGEN
VIN
PW
Figure 6.
Input charge test circuit
V IN
GEN
ND8003
10/25
VND10N06 / VND10N06-1
Figure 7.
Electrical specifications
Unclamped inductive waveforms
11/25
Electrical specifications
2.4
Electrical characteristics curves
Figure 8.
12/25
VND10N06 / VND10N06-1
Static Drain-Source on
resistance (VIN = 3.5V)
Figure 9.
Static Drain-Source on
resistance (VIN = 5V)
Figure 10. Derating curve
Figure 11. Static Drain-Source on
resistance vs. input voltage
Figure 12. Current limit Vs. junction
temperature
Figure 13. Source-Drain diode voltage
Vs. junction temperature
VND10N06 / VND10N06-1
Electrical specifications
Figure 14. Step response current limit
Figure 15. Switching time resistive load
Figure 16. Turn-on current slope
(VIN = 3.5V)
Figure 17. Turn-on current slope
(VIN = 7V)
Figure 18. Input voltage Vs. input
charge
Figure 19. Turn-off Drain-Source voltage
slope
13/25
Electrical specifications
VND10N06 / VND10N06-1
Figure 20. Turn-off Drain-Source voltage Figure 21. Capacitance variations
slope
Figure 22. Switching time resistive load Figure 23. Normalized on resistance Vs.
temperature (VIN = 7V)
Figure 24. Output characteristics
14/25
Figure 25. Normalized on resistance Vs.
temperature (VIN = 3.5V)
VND10N06 / VND10N06-1
Electrical specifications
Figure 26. Normalized input threshold
voltage Vs. temperature
15/25
Protection features
3
VND10N06 / VND10N06-1
Protection features
During normal operation, the INPUT pin is electrically connected to the gate of the internal
power MOSFET through a low impedance path as soon as VIN > VIH.
The device then behaves like a standard power MOSFET and can be used as a switch from
DC to 50KHz. The only difference from the user’s standpoint is that a small DC current IISS
flows into the INPUT pin in order to supply the internal circuitry.
During turn-off of an unclamped inductive load the output voltage is clamped to a safe level
by an integrated Zener clamp between DRAIN pin and the gate of the internal Power
MOSFET.
In this condition, the Power MOSFET gate is set to a voltage high enough to sustain the
inductive load current even if the INPUT pin is driven to 0V. The device integrates an active
current limiter circuit which limits the drain current ID to Ilim whatever the INPUT pin Voltage.
When the current limiter is active, the device operates in the linear region, so power
dissipation may exceed the heatsinking capability. Both case and junction temperatures
increase, and if this phase lasts long enough, junction temperature may reach the
overtemperature threshold Tjsh.
If Tj reaches Tjsh, the device shuts down whatever the INPUT pin voltage. The device will
restart automatically when Tj has cooled down to Tjrs.
16/25
VND10N06 / VND10N06-1
4
Thermal data
Thermal data
Figure 27. Thermal impedance for DPAK / IPAK
17/25
Package and packing information
5
Package and packing information
5.1
ECOPACK® packages
VND10N06 / VND10N06-1
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
5.2
DPAK mechanical data
Figure 28. DPAK package dimensions
P 032P
18/25
VND10N06 / VND10N06-1
Table 10.
Package and packing information
DPAK mechanical data
Millimeters
Dim.
Min.
Typ.
Max.
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
B
0.64
0.90
B2
5.20
5.40
C
0.45
0.60
C2
0.48
0.60
D
6.00
6.20
D1
E
5.1
6.40
6.60
E1
4.7
e
2.28
G
4.40
4.60
H
9.35
10.10
L2
L4
0.8
0.60
R
V2
Package weight
1.00
0.2
0°
8°
Gr. 0.29
19/25
Package and packing information
5.3
VND10N06 / VND10N06-1
IPAK mechanical data
Figure 29. IPAK mechanical data and package outline
Table 11.
IPAK mechanical data
Millimeters
Symbol
Min.
Typ.
A
2.2
2.4
A1
0.9
1.1
A3
0.7
1.3
B
0.64
0.9
B2
5.2
5.4
B3
0.85
B5
0.3
B6
0.95
C
0.45
0.6
C2
0.48
0.6
D
6
6.2
E
6.4
6.6
G
4.4
4.6
H
15.9
16.3
L
9
9.4
L1
0.8
1.2
L2
20/25
Max.
0.8
1
VND10N06 / VND10N06-1
5.4
Package and packing information
DPAK packing information
The devices can be packed in tube or tape and reel shipments (see the Device summary on
page 1 ).
Figure 30. DPAK footprint
Figure 31. DPAK tube shipment (no suffix)
A
C
Base Q.ty
Bulk Q.ty
Tube length (± 0.5)
A
B
C (± 0.1)
75
3000
532
6
21.3
0.6
B
All dimensions are in mm.
21/25
Package and packing information
VND10N06 / VND10N06-1
Figure 32. DPAK tape and reel shipment (suffix “TR”)
Reel dimensions
Base Q.ty
Bulk Q.ty
A (max)
B (min)
C (± 0.2)
F
G (+ 2 / -0)
N (min)
T (max)
2500
2500
330
1.5
13
20.2
16.4
60
22.4
Tape dimensions
According to Electronic Industries Association
(EIA) Standard 481 rev. A, Feb 1986
Tape width
Tape Hole Spacing
Component Spacing
Hole Diameter
Hole Diameter
Hole Position
Compartment Depth
Hole Spacing
W
P0 (± 0.1)
P
D (± 0.1/-0)
D1 (min)
F (± 0.05)
K (max)
P1 (± 0.1)
16
4
8
1.5
1.5
7.5
6.5
2
All dimensions are in mm.
End
Start
Top
cover
tape
No components
Components
500mm min
Empty components pockets
saled with cover tape.
User direction of feed
22/25
No components
500mm min
VND10N06 / VND10N06-1
5.5
Package and packing information
IPAK packing information
Figure 33. IPAK tube shipment (no suffix)
Base Q.ty
Bulk Q.ty
Tube length (± 0.5)
A
B
C (± 0.1)
75
3000
532
6
21.3
0.6
All dimensions are in mm.
23/25
Revision history
6
VND10N06 / VND10N06-1
Revision history
Table 12.
24/25
Document revision history
Date
Revision
Changes
Oct-1997
1
Initial release.
22-Aug-2006
2
Document restructured.
12-Dec-2008
3
Document restructured and reformatted.
Added ECOPACK® packages information.
VND10N06 / VND10N06-1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
25/25