Metallized Polypropylene (MKP/MFP) Series/Type: B32682 The following products presented in this data sheet are being withdrawn. Ordering Code B32682 B32683 B32684 Substitute Product Date of Withdrawal 06.09.2002 06.09.2002 06.09.2002 Deadline Last Orders 31.10.2002 31.10.2002 31.10.2002 Last Shipments 31.03.2003 31.03.2003 31.03.2003 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. Metallized Polypropylene Film Capacitors (MFP) B 32 682 in Plastic Case … B 32 686 Wound MFP pulse capacitors with highest possible contact reliability Construction ■ Dielectric: polypropylene ■ Film metallized on one side and metal foils internally connected in series ■ Plastic case (UL 94 V-0) ■ Epoxy resin sealing Features ■ Very high pulse strength ■ Highest possible contact reliability ■ Self-healing properties Dimensions in mm Typical applications ■ Pulse circuits with steep voltage rise rates ■ High-frequency ac loads ■ Snubbering of power semiconductors Lead spacing ± 0,4 Diameter d1 Type 15,0 0,8 B 32 682 22,5 0,8 B 32 683 27,5 0,8 B 32 684 37,5 1,0 B 32 686 Terminals ■ Parallel wire leads, tinned ■ Also available with (3,2 ± 0,3) mm lead length Marking Manufacturer’s logo, lot number style (MFP), rated capacitance (coded), capacitance tolerance (code letter), rated dc voltage, date of manufacture (coded) Delivery mode Bulk (untaped) Taped (Ammo pack or reels) For notes on taping, refer to chapter “Taping and packing”, page 274. 179 12/00 MFP B 32 682 … B 32 686 Overview of available types 15 mm Type B 32 682 B 32 683 Page 0,10 nF 0,15 nF 0,22 nF 0,33 nF 0,47 nF 0,68 nF 1,0 nF 1,5 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 0,10 µF 0,15 µF 181 182 Lead spacing 27,5 mm 37,5 mm Type B 32 684 B 32 686 Page 15 nF 22 nF 33 nF 47 nF 68 nF 0,10 µF 0,15 µF 183 184 180 12/00 2000 Vdc 500 Vac 2000 Vdc 500 Vac 1600 Vdc 450 Vac 1250 Vdc 450 Vac 1600 Vdc 450 Vac 1250 Vdc 450 Vac 1000 Vdc 400 Vac 2000 Vdc 500 Vac 1600 Vdc 450 Vac 1250 Vdc 450 Vac 1000 Vdc 400 Vac 630 Vdc 300 Vac 1000 Vdc 400 Vac 1600 Vdc 450 Vac 1250 Vdc 450 Vac 1000 Vdc 400 Vac 630 Vdc 300 Vac 630 Vdc 300 Vac 0,22 µF 0,33 µF 0,47 µF 22,5 mm 2000 Vdc 500 Vac Lead spacing B 32 682 MFP 15 Ordering codes and packing units, lead spacing 15 mm VR (Vrms, f ≤ 1 kHz) CR 630 Vdc (300 Vac) 4,7 nF 6,8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 15 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 1,5 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 0,10 nF 0,15 nF 0,22 nF 0,33 nF 0,47 nF 0,68 nF 1,0 nF 1,5 nF 2,2 nF 3,3 nF 4,7 nF 1000 Vdc (400 Vac) 1250 Vdc (450 Vac) 1600 Vdc (450 Vac) 2000 Vdc (500 Vac) Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 6,0 × 11,0 × 18,0 7,0 × 12,5 × 18,0 8,5 × 14,5 × 18,0 9,0 × 17,5 × 18,0 5,0 × 10,5 × 18,0 6,0 × 11,0 × 18,0 7,0 × 12,5 × 18,0 8,5 × 14,5 × 18,0 9,0 × 17,5 × 18,0 5,0 × 10,5 × 18,0 6,0 × 11,0 × 18,0 7,0 × 12,5 × 18,0 8,5 × 14,5 × 18,0 9,0 × 17,5 × 18,0 5,0 × 10,5 × 18,0 6,0 × 11,0 × 18,0 7,0 × 12,5 × 18,0 8,5 × 14,5 × 18,0 9,0 × 17,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 5,0 × 10,5 × 18,0 6,0 × 11,0 × 18,0 7,0 × 12,5 × 18,0 8,5 × 14,5 × 18,0 9,0 × 17,5 × 18,0 B32682-A6472-+*** B32682-A6682-+*** B32682-A6103-+*** B32682-A6153-+*** B32682-A6223-+*** B32682-A6333-+*** B32682-A6473-+*** B32682-A332-+*** B32682-A472-+*** B32682-A682-+*** B32682-A103-+*** B32682-A153-+*** B32682-A7222-+*** B32682-A7332-+*** B32682-A7472-+*** B32682-A7682-+*** B32682-A7103-+*** B32682-A1152-+*** B32682-A1222-+*** B32682-A1332-+*** B32682-A1472-+*** B32682-A1682-+*** B32682-A2101-+*** B32682-A2151-+*** B32682-A2221-+*** B32682-A2331-+*** B32682-A2471-+*** B32682-A2681-+*** B32682-A2102-+*** B32682-A2152-+*** B32682-A2222-+*** B32682-A2332-+*** B32682-A2472-+*** Ammo pack 1170 1170 1170 960 830 680 640 1170 960 830 680 640 1170 960 830 680 640 1170 960 830 680 640 1170 1170 1170 1170 1170 1170 1170 960 830 680 640 Reel Untaped 1300 1300 1300 1100 900 700 700 1300 1100 900 700 700 1300 1100 900 700 700 1300 1100 900 700 700 1300 1300 1300 1300 1300 1300 1300 1100 900 700 700 1000 1000 1000 1000 1000 500 500 1000 1000 1000 500 500 1000 1000 1000 500 500 1000 1000 1000 500 500 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 500 Capacitance tolerance: ± 10 % =ˆ K, ± 5 % =ˆ J, (± 3,5 % upon request) 1) + Code letter for capacitance tolerance *** Code number for packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32682-A6472-K3 181 12/00 MFP B 32 683 22,5 Ordering codes and packing units, lead spacing 22,5 mm VR (Vrms, f ≤ 1 kHz) CR 630 Vdc (300 Vac) 33 nF 47 nF 68 nF 0,10 µF 0,15 µF 10 nF 15 nF 22 nF 33 nF 47 nF 10 nF 15 nF 22 nF 33 nF 6,8 nF 10 nF 15 nF 22 nF 2,2 nF 3,3 nF 4,7 nF 6,8 nF 10 nF 15 nF 1000 Vdc (400 Vac) 1250 Vdc (450 Vac) 1600 Vdc (450 Vac) 2000 Vdc (500 Vac) Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,5 10,5 × 16,5 × 26,5 11,0 × 20,5 × 26,5 6,0 × 15,0 × 26,5 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,5 10,5 × 18,5 × 26,5 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,5 10,5 × 18,5 × 26,5 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,5 10,5 × 18,5 × 26,5 6,0 × 15,0 × 26,5 6,0 × 15,0 × 26,5 7,0 × 16,0 × 26,5 8,5 × 16,5 × 26,5 10,5 × 16,5 × 26,5 11,0 × 20,5 × 26,5 B32683-A6333-+*** B32683-A6473-+*** B32683-A6683-+*** B32683-A6104-+*** B32683-A6154-+*** B32683-A103-+*** B32683-A153-+*** B32683-A223-+*** B32683-A333-+*** B32683-A473-+*** B32683-A7103-+*** B32683-A7153-+*** B32683-A7223-+*** B32683-A7333-+*** B32683-A1682-+*** B32683-A1103-+*** B32683-A1153-+*** B32683-A1223-+*** B32683-A2222-+*** B32683-A2332-+*** B32683-A2472-+*** B32683-A2682-+*** B32683-A2103-+*** B32683-A2153-+*** Ammo pack 680 580 480 390 370 680 680 580 480 390 680 580 480 390 680 580 480 390 680 680 580 480 390 370 Reel Untaped 700 600 500 400 350 700 700 600 500 400 700 600 500 400 700 600 500 400 700 700 600 500 400 350 720 630 510 540 510 720 720 630 510 540 720 630 510 540 720 630 510 540 720 720 630 510 540 510 Capacitance tolerance: ± 10 % =ˆ K, ± 5 % =ˆ J, (± 3,5 % upon request) 1) + Code letter for capacitance tolerance *** Code number for the packing: Ammo pack = 289, reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32683-A6154-K3 182 12/00 B 32 684 MFP 27,5 Ordering codes and packing units, lead spacing 27,5 mm CR VR (Vrms, f ≤ 1 kHz) Maximum dimensions b × h × l (mm) Ordering code1) Packing units (pcs) 630 Vdc 0,15 µF (300 Vac) 0,22 µF 0,33 µF 0,47 µF 1000 Vdc 68 nF (400 Vac) 0,10 µF 0,15 µF 1250 Vdc 47 nF (450 Vac) 68 nF 0,10 µF 0,15 µF 1600 Vdc 33 nF (450 Vac) 47 nF 68 nF 0,10 µF 2000 Vdc 15 nF (500 Vac) 22 nF 33 nF 47 nF 11,0 × 21,0 × 31,5 12,5 × 21,5 × 31,5 15,0 × 24,5 × 31,5 18,0 × 27,5 × 31,5 11,0 × 21,0 × 31,5 12,5 × 21,5 × 31,5 18,0 × 27,5 × 31,5 11,0 × 21,0 × 31,5 13,5 × 23,0 × 31,5 15,0 × 24,5 × 31,5 19,0 × 30,0 × 31,5 11,0 × 21,0 × 31,5 12,5 × 21,5 × 31,5 15,0 × 24,5 × 31,5 19,0 × 30,0 × 31,5 11,0 × 21,0 × 31,5 11,0 × 21,0 × 31,5 14,0 × 24,5 × 31,5 18,0 × 27,5 × 31,5 B32684-A6154-+*** B32684-A6224-+*** B32684-A6334-+ B32684-A6474-+ B32684-A683-+*** B32684-A104-+*** B32684-A154-+ B32684-A7473-+*** B32684-A7683-+*** B32684-A7104-+ B32684-A7154-+ B32684-A1333-+*** B32684-A1473-+*** B32684-A1683-+ B32684-A1104-+ B32684-A2153-+*** B32684-A2223-+*** B32684-A2333-+ B32684-A2473-+ Ammo pack – – – – – – – – – – – – – – – – – – – Reel Untaped 350 300 – – 350 300 – 350 250 – – 350 300 – – 350 350 – – 320 280 240 200 320 280 200 320 260 240 180 320 280 240 180 320 320 260 200 Capacitance tolerance: ± 10 % =ˆ K, ± 5 % =ˆ J, (± 3,5 % upon request) 1) + Code letter for capacitance tolerance *** Code number for packing: Reel = 189 The ordering code for untaped components ends after the tolerance code letter. For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32684-A6154-K3 183 12/00 MFP B 32 686 37,5 Ordering codes and packing units, lead spacing 37,5 mm CR VR (Vrms f < 60 kHz) 1000 Vdc 0,10 µF (400 Vac) 0,15 µF 0,22 µF 0,33 µF 0,47 µF 1250 Vdc 0,68 nF (450 Vac) 0,10 µF 0,15 µF 0,22 µF 0,33 µF 1600 Vdc 0,47 nF (450 Vac) 0,68 nF 0,10 µF 0,15 µF 2000 Vdc 0,22 nF (500 Vac) 0,33 nF 0,47 nF 0,68 nF 0,10 µF Maximum dimensions b × h × l (mm) 12,0 × 22,0 × 41,5 14,0 × 25,0 × 41,5 16,0 × 28,5 × 41,5 20,0 × 39,5 × 41,5 20,0 × 39,5 × 41,5 12,0 × 22,0 × 41,5 14,0 × 25,0 × 41,5 16,0 × 28,5 × 41,5 18,0 × 32,5 × 41,5 20,0 × 39,5 × 41,5 12,0 × 22,0 × 41,5 14,0 × 25,0 × 41,5 18,0 × 32,5 × 41,5 20,0 × 39,5 × 41,5 12,0 × 22,0 × 41,5 14,0 × 25,0 × 41,5 16,0 × 28,5 × 41,5 18,0 × 32,5 × 41,5 20,0 × 39,5 × 41,5 Ordering code1) Packing units (pcs) B32686-A104-+ B32686-A154-+ B32686-A224-+ B32686-A334-+ B32686-A474-+ B32686-A7683-+ B32686-A7104-+ B32686-A7154-+ B32686-A7224-+ B32686-A7334-+ B32686-A1473-+ B32686-A1683-+ B32686-A1104-+ B32686-A1154-+ B32686-A2223-+ B32686-A2333-+ B32686-A2473-+ B32686-A2683-+ B32686-A2104-+ Untaped 72 56 48 32 32 72 56 48 48 32 72 56 48 32 72 56 48 48 32 Capacitance tolerance: ± 20 % =ˆ M, ± 10 % =ˆ K, ± 5 % =ˆ J, ± 5 % 1) + Code letter for capacitance tolerance For capacitors with 3,2 mm lead length, append code number “3” to the tolerance code, e.g.: B32686-A104-K3 184 12/00 B 32 682 MFP … B 32 686 Technical data Climatic category in accordance with IEC 60068-1 55/100/56 Lower category temperature Tmin Upper category temperature Tmax − 55 °C + 100 °C Damp heat test 56 days/40 °C/93 % relative humidity Limit values after damp heat test Capacitance change |∆C/C| ≤2% Dissipation factor change ∆ tan δ ≤ 1,0 ⋅ 10−3 (at 10 kHz) Insulation resistance Ris ≥ 50 % of minimum or time constant τ = C R ⋅ Ris as-delivered values Reliability: Reference conditions Failure rate 0,5 ⋅ V R; 40 °C 1 ⋅ 10−9/h = 1 fit For a conversion table for other operating conditions and temperatures, refer to chapter “Quality assurance”, page 327. Service life Failure criteria: Total failure Failure due to variation of parameters 200 000 h Short circuit or open circuit Capacitance change |∆C/C| Dissipation factor tan δ Insulation resistance Ris or time constant τ = C R ⋅ Ris > 10 % 4 ⋅ upper limit values < 1500 MΩ (CR ≤ 0,33 µF) < 500 s (CR > 0,33 µF) DC test voltage 2,0 ⋅ V R, 2 s Category voltage VC Operation with dc voltage or ac voltage Vrms up to 1 kHz T ≤ 85 °C: VC = 1,0 ⋅ V R or 1,0 ⋅ V rms Dissipation factor tan δ (in 10−3) at 20 °C (upper limit values) Insulation resistance R is or time constant τ = CR ⋅ Ris at 20 °C, rel. humidity ≤ 65 % (minimum as-delivered values) at 1 kHz 10 kHz 100 kHz CR ≤ 0,33 µF 100 GΩ C R ≤ 0,1 µF C R > 0,1 µF – 0,4 1,0 0,4 0,5 – C R > 0,33 µF 30 000 s 185 12/00 MFP B 32 682 … B 32 686 Impedance Z versus frequency f (typical values) Pulse handling capability Maximum permissible voltage change per unit of time for non-sinusoidal voltages (pulse, sawtooth) VR Max. rate of voltage rise V pp/τ in V/µs (for Vpp = V R) Lead spacing 15 mm 22,5 mm 27,5 mm 37,5 mm 5 000 3 000 2 000 — 1000 Vdc 9 000 5 000 3 800 2 000 1250 Vdc 12 000 7 000 4 500 2 800 1600 Vdc 16 000 11 000 6 000 3 500 2000 Vdc 17 000 15 000 8 000 4 500 630 Vdc For V pp < V R , the permissible voltage rise rate value V pp/τ may be multiplied by the factor V R/V pp. Also refer to the calculation example in chapter “General technical information”, page 302. VR Pulse characteristic k 0 in V2/µs (for Vpp ≤ V R) Lead spacing 15 mm 22,5 mm 27,5 mm 2 500 000 37,5 mm 630 Vdc 6 300 000 3 800 000 1000 Vdc 18 000 000 10 000 000 7 500 000 4 000 000 1250 Vdc 30 000 000 17 500 000 11 000 000 7 000 000 1600 Vdc 51 000 000 35 000 000 19 000 000 11 000 000 2000 Vdc 68 000 000 60 000 000 32 000 000 18 000 000 186 12/00 — B 32 682 MFP 15 Permissible ac voltage V rms versus frequency f Lead spacing 15 mm 630 Vdc/ 300 Vac 1000 Vdc/ 400 Vac KMK0725-B 1000 Vac Vrms 500 Vrms 500 100 100 50 10 10 3 4,7 nF 10 nF 47 nF 10 4 50 10 5 10 6 Hz 10 7 f 1250 Vdc/ 450 Vac 10 10 3 KMK0731-K Vrms 500 100 100 2,2 nF 10 nF 10 4 10 4 10 5 10 6 Hz 10 7 f 50 10 5 10 6 Hz 10 7 f KMK0734-A 1000 Vac Vrms 500 10 10 3 3,3 nF 15 nF 1600 Vdc/ 450 Vac 1000 Vac 50 KMK0728-1 1000 Vac 10 10 3 187 12/00 1,5 nF 6,8 nF 10 4 10 5 10 6 Hz 10 7 f MFP 15 B 32 682 … B 32 684 Permissible ac voltage V rms versus frequency f Lead spacing 15 mm 2000 Vdc/ 500 Vac KMK0737-Z 1000 Vac Vrms 500 100 50 10 10 3 0,10 nF 1,0 nF 4,7 nF 10 4 10 5 10 6 Hz 10 7 f 188 12/00 B 32 683 MFP 22,5 Permissible ac voltage V rms versus frequency f Lead spacing 22,5 mm 630 Vdc/ 300 Vac 1000 Vdc/ 400 Vac KMK0726-J 1000 Vac Vrms 500 Vrms 500 100 100 50 10 10 3 50 33 nF 0,15 µF 10 4 10 5 10 6 Hz 10 7 f 1250 Vdc/ 450 Vac 10 10 3 KMK0732-T Vrms 500 100 100 10 nF 33 nF 10 4 10 4 10 5 10 6 Hz 10 7 f 50 10 5 10 6 Hz 10 7 f KMK0735-I 1000 Vac Vrms 500 10 10 3 10 nF 47 nF 1600 Vdc/ 450 Vac 1000 Vac 50 KMK0729-9 1000 Vac 10 10 3 189 12/00 6,8 nF 22 nF 10 4 10 5 10 6 Hz 10 7 f MFP B 32 683 22,5 Permissible ac voltage V rms versus frequency f Lead spacing 22,5 mm 2000 Vdc/ 500 Vac KMK0738-8 1000 Vac Vrms 500 100 50 10 10 3 2,2 nF 15 nF 10 4 10 5 10 6 Hz 10 7 f 190 12/00 B 32 684 MFP 27,5 Permissible ac voltage V rms versus frequency f Lead spacing 27,5 mm 630 Vdc/ 300 Vac 1000 Vdc/ 400 Vac KMK0724-3 1000 Vac Vrms 500 Vrms 500 100 100 50 10 10 3 0,15 µF 0,47 µF 10 4 50 10 5 10 6 Hz 10 7 f 1250 Vdc/ 450 Vac 10 10 3 KMK0730-C Vrms 500 100 100 47 nF 0,15 µF 10 4 10 4 10 5 10 6 Hz 10 7 f 50 10 5 10 6 Hz 10 7 f KMK0733-2 1000 Vac Vrms 500 10 10 3 68 nF 0,15 µF 1600 Vdc/ 450 Vac 1000 Vac 50 KMK0727-S 1000 Vac 10 10 3 191 12/00 33 nF 0,10 µF 10 4 10 5 10 6 Hz 10 7 f MFP B 32 684 27,5 Permissible ac voltage V rms versus frequency f Lead spacing 27,5 mm 2000 Vdc/ 500 Vac KMK0736-R 1000 Vac Vrms 500 100 50 10 10 3 15 nF 47 nF 10 4 10 5 10 6 Hz 10 7 f 192 12/00 B 32 686 MFP 37,5 Permissible ac voltage V rms versus frequency f Lead spacing 37,5 mm 1000 Vdc/ 400 Vac 1250 Vdc/ 450 Vac KMK0657-8 1000 Vac Vrms Vrms 500 100 50 10 10 3 0,1 µF 0,22 µF 0,47 µF 10 4 50 10 5 10 6 KMK0659-P 10 4 10 5 10 6 Hz 10 7 f KMK0660-S 1000 Vac Vrms 500 500 100 100 10 10 3 10 10 3 Hz 10 7 f 68 nF 0,15 µF 0,33 µF 2000 Vdc/ 500 Vac 1000 Vac 50 500 100 1600 Vdc/ 450 Vac Vrms KMK0658-G 1000 Vac 47 nF 0,1 µF 0,15 µF 10 4 50 10 5 10 6 Hz 10 7 f 10 10 3 193 12/00 22 nF 0,1 µF 10 4 10 5 10 6 Hz 10 7 f B 32 682 … MFP B 32 686 Flyback application Permissible voltage and current / waveform Permissible current Ipp versus frequency for a duty cycle of 20 % (t0 /t = 0,2): V0-p t = 10 ... 63,5 µs t0 Ipp KMK0720-5 Approximation formular for duty cycle higher than 20 %: 3 t0 ′ = I I pp pp -----3 t ′0 194 12/00 B 32 682 MFP … B 32 686 Flyback application permissible current Ipp versus rated capacitance C R Frequency = 15,75 kHz Frequency = 31,5 kHz KMK0700-Q 20 A pp KMK0701-Y 20 A pp I pp I pp 16 16 14 14 12 10 630 V 1000 V 1250 V 1600 V 2000 V 12 10 8 8 6 6 4 4 2 2 0 10 0 10 1 nF 10 2 C 0 10 0 Frequency = 95 kHz KMK0702-7 20 A pp I pp 16 14 630 V 1000 V 1250 V 1600 V 2000 V 12 10 8 6 4 2 0 10 0 10 1 nF 10 2 C 195 12/00 630 V 1000 V 1250 V 1600 V 2000 V 10 1 nF 10 2 C Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 1