ALUMINUM ELECTROLYTIC CAPACITORS UK 6mmL Chip Type, For general Audio Equipment series Chip type acoustic series. Applicable to automatic insertion machine using carrier tape. Adapted to the RoHS directive (2002/95/EC) UK MW Chip Specifications Item Performance Characteristics Category Temperature Range – 40 ~ +85°C Rated Voltage Range 4 ~ 50V Rated Capacitance Range 0.1 ~ 220µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C tan δ 4 0.35 Rated voltage (V) tan δ (MAX.) 6.3 0.26 10 0.20 16 0.16 25 0.14 35 0.12 50 0.12 Measurement frequency : 120Hz 4 7 15 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C Stability at Low Temperature 6.3 4 8 25 2 4 35 2 3 50 2 3 Within ± 20% of initial value 200% or less of initial specified value Initial specified value or less After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250°C Capacitance change Within ±10% of initial value for 30 seconds. After removing from the hot plate and restored tan δ Initial specified value or less at room temperature, they meet the characteristics requirements Initial specified value or less Leakage current listed at right. Shelf Life Resistance to soldering heat Black print on the case top. Marking Type numbering system (Example : 16V 10µF) Chip Type 1 Positive 3 4 5 6 7 8 9 10 11 12 13 14 Taping code (mm) φD E B±0.2 φD±0.5 X2 10 16V C±0.2 A±0.2 A±0.2 ∗Voltage Plastic platform 0.3MAX. 2 U U K 1 C 1 0 0 MCO 1 G S 0.5MAX. Capacitance Lot No. 16 2 4 Capacitance change tan δ Leakage current After 2000 hours' application of rated voltage at 85°C, capacitors meet the characteristics requirements listed at right. Endurance 10 3 8 L±0.3 A B C E L 4 1.8 4.3 4.3 1.0 5.8 Size code 5 6.3 2.1 2.4 5.3 6.6 5.3 6.6 1.3 2.2 5.8 5.8 Configuration Rated Capacitance tolerance (±20%) Capacitance (10µF ) Rated voltage (16V ) Negative 0.5 ~ 0.8 Series name ∗Voltage mark for 6.3V is 6V . Type Dimensions 4 0G V Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 4 4 5 6.3 6.3 0J 28 33 56 96 4 5 5 6.3 10 1A 28 37 45 70 5 5 6.3 16 1C 33 41 52 4 5 6.3 6.3 25 1E 23 37 49 58 4 5 6.3 6.3 35 1V 16 27 42 52 4 5 6.3 50 1H 18 29 46 4 4 4 4 4 4 4 5 6.3 Case size φD 1.0 2.0 2.8 4.0 8.4 13 17 20 33 Rated ripple Rated Ripple(mArms)at 85°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please refer to page 3 for the minimum order quantity. CAT.8100V