Ordering number : ENN7426 4A002MH5 ExPD (Excellent Power Device) 4A002MH5 2-Input NOR Gate Features • • 2-input NOR gate. Enable to 25 voltage operation. Low power-loss. High speed operation. unit : mm 2216 [4A002MH5] 5 2.1 INB OUT L L H L H L H L L H H L 3 0.25 INA 1.6 4 Truth Table 0.15 0.3 2 1 0.65 0.07 • Package Dimensions 0.25 • 5 2.0 4 (Bottom view) H : High level voltage 0.85 L : Low level voltage 1 Specifications 2 1 : INB 2 : INA 3 : GND 4 : OUT 5 : VDD 3 (Top view) SANYO : MCPH5 Absolute Maximum Ratings at Ta=25°C Parameter DC Supply Voltage Symbol Conditions Ratings VDD Input Voltage VIN VOUT Output Voltage Input Current V GND--0.3 to VDD+0.3 V GND--0.3 to VDD+0.3 IIN Output Current Allowable Power Dissipation IOUT PD Storage Temperature Tstg Unit --0.3 to +25 Mounted on a ceramic board (600mm2✕0.8mm) V ±10 mA ±75 mA 0.8 W --55 to +150 °C Recommended Operating Conditions at Ta=25°C Parameter DC Supply Voltage Symbol Conditions Ratings Unit VDD 3 to +25 V 0 to VDD V Output Voltage VIN VOUT Output Current IOUT Input Rise And Fall Time ∆t / ∆v Operating Temperature Topr Input Voltage 0 to VDD ±50 VDD=25V VDD<5V VDD≥5V V mA ≤100 ns / V 20 ns / V --40 to +85 °C Marking : XB Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2503 TS IM TA-3914 No.7426-1/5 4A002MH5 DC Characteristics at Ta=25°C Parameter Symbol High-level Input Voltage VIH Low-level Input Voltage VIL Input Leakage Current IIN High-level Output Voltage VOH Low-level Output Voltage VOL Conditions Ratings min typ max VDD=5V 3.5 VDD=10V 7.0 V V VDD=15V 11.0 V VDD=25V 18.0 V VDD=5V 1.5 V VDD=10V 3.0 V VDD=15V 4.0 V VDD=25V 7.0 V VDD=25V, VIN=25V 0.1 µA 0.1 µA VDD=25V, VIN=0 VDD=5V, IO=1mA 4.5 V VDD=10V, IO=2.5mA 9.0 V VDD=15V, IO=5.0mA 13.5 V VDD=25V, IO=10mA 22.5 V VDD=5V, IO=1mA 0.5 VDD=10V, IO=2.5mA VDD=15V, IO=5.0mA 1.0 V 1.5 V VDD=25V, IO=10mA Supply Current IDD Unit V 2.5 V VDD=5V, VIN=VDD, GND 0.25 µA VDD=10V, VIN=VDD, GND VDD=15V, VIN=VDD, GND 0.5 µA 1.0 µA VDD=25V, VIN=VDD, GND 2.0 µA AC Characteristics at Ta=25°C Parameter Symbol tTLH Output Transition Time tTHL tPLH Propagation Delay Time tPHL Input Capacitance CIN Conditions Ratings min typ max Unit VDD=5V VDD=10V 14 ns 8 ns VDD=15V 7 ns VDD=25V 6 ns VDD=5V 14 ns VDD=10V 8 ns VDD=15V 7 ns VDD=25V 6 ns VDD=5V 40 ns VDD=10V 20 ns VDD=15V 15 ns VDD=25V 12 ns VDD=5V 40 ns VDD=10V 20 ns VDD=15V 15 ns VDD=25V 12 ns 8 pF Block Diagram VDD OUT 5 4 1 2 3 INB INA GND No.7426-2/5 4A002MH5 Switching Time Test Circuit Switching Time Wave Form 10ns 10ns VDD 90% 50% 10% Input IN OUT tPHL tPLH 10MΩ CL=10pF 90% 50% 10% Output tTHL IOH -- VOH VDD=5V 18 16 14 Ta= --25 12 °C 25°C 75°C 10 8 6 4 2 0 1 2 3 4 High-Level Output Voltage, VOH -- V 16 Ta= --25°C 14 25°C 12 75°C 10 8 6 4 2 5 0 60 Ta= --25 °C 25°C 75°C 30 20 10 Low-Level Output Current, IOL -- mA VDD=10V 40 2 3 4 0 5 IT05792 IOL -- VOL 80 70 50 1 Low-Level Output Voltage, VOL -- V IT05788 IOH -- VOH 80 VDD=10V 70 60 Ta= --25°C 50 25°C 40 75°C 30 20 10 0 2 3 4 5 6 7 8 High-Level Output Voltage, VOH -- V 9 10 0 = Ta C 5° --2 °C 25 75 °C 40 30 20 10 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 High-Level Output Voltage, VOH -- V IT05790 Low-Level Output Current, IOL -- mA 70 50 3 4 5 6 7 8 9 10 IT05793 IOL -- VOL 80 VDD=15V 60 2 Low-Level Output Voltage, VOL -- V IOH -- VOH 80 1 IT05789 VDD=15V 70 °C 1 --2 5 0 60 Ta = High-Level Output Current, IOH -- mA VDD=5V 18 0 0 High-Level Output Current, IOH -- mA IOL -- VOL 20 Low-Level Output Current, IOL -- mA High-Level Output Current, IOH -- mA 20 tTLH 25 °C °C 75 50 40 30 20 10 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Low-Level Output Voltage, VOL -- V IT05794 No.7426-3/5 4A002MH5 IOH -- VOH 50 40 30 20 10 60 50 C 5° --2 °C = 25 Ta 75° C 20 10 25°C 25° C 75 °C 10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 IT05795 IOL -- VDD VOL=0.1✕VDD 70 60 C 5° = 25°C Ta °C 75 50 --2 40 30 20 10 0 DC Supply Voltage, VDD -- V 30 0 --2 5 25 °C 75 °C °C Ta = 50 40 30 20 10 20 25 0 30 IT05798 VOL=0.2✕VDD 70 °C Low-Level Output Current, IOL -- mA 70 15 IOL -- VDD 80 VOH=0.8✕VDD 60 10 DC Supply Voltage, VDD -- V IOH -- VDD 80 5 IT05796 60 °C 25 75 20 °C 15 25 10 --2 5 5 Ta = 0 High-Level Output Current, IOH -- mA 20 Low-Level Output Voltage, VOL -- V 0 50 40 30 20 10 0 0 5 10 15 20 25 DC Supply Voltage, VDD -- V 30 0 =5V VDD 60 50 10V 30 15V 20 25V 10 0 Output Transition Time, tTLH / tTHL -- ns Ta=25°C 40 10 15 20 25 DC Supply Voltage, VDD -- V 30 IT05799 tTLH / tTHL -- CL 120 80 70 5 IT05797 tPLH / tPHL -- CL 90 Propagation Delay Time, tPLH / tPHL -- ns 30 0 Low-Level Output Current, IOL -- mA High-Level Output Current, IOH -- mA 70 30 40 80 VOH=0.9✕VDD 40 50 IT05791 IOH -- VDD 80 60 0 0 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 High-Level Output Voltage, VOH -- V VDD=25V 70 Ta= -- 60 Low-Level Output Current, IOL -- mA 70 IOL -- VOL 80 VDD=25V °C --25 Ta= C 25° °C 75 High-Level Output Current, IOH -- mA 80 Ta=25°C 100 V =5 D D V 80 60 10V 40 25V 15V 20 0 0 20 40 60 80 100 120 140 Load Capacitance, CL -- pF 160 180 IT05800 0 20 40 60 80 100 120 140 Load Capacitance, CL -- pF 160 180 IT05801 No.7426-4/5 4A002MH5 tPLH / tPHL -- VDD 50 40 30 CL =50p F 10pF 20 10 0 Ta=25°C 50 40 30 CL=50pF 20 10 10pF 0 0 5 10 15 20 25 DC Supply Voltage, VDD -- V 30 IT05802 PD -- Ta 1.0 Allowable Power Dissipation, PD -- W tTLH / tTHL -- VDD 60 Ta=25°C Output Transition Time, tTLH / tTHL -- ns Propagation Delay Time, tPLH / tPHL -- ns 60 0 5 10 15 20 25 DC Supply Voltage, VDD -- V 30 IT05803 Mounted on a ceramic board(600mm2✕0.8mm) 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 10 20 30 40 50 60 70 Ambient Temperature, Ta -- °C 80 90 100 IT05804 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2003. Specifications and information herein are subject to change without notice. PS No.7426-5/5