PSDPRO Parallel Port Programmer for ST’s Programmable System Device (PSD) Products DATA BRIEFING FEATURES SUMMARY ■ ■ ■ ■ ■ ■ LOW COST PARALLEL PORT PROGRAMMER FOR ST'S ENTIRE PSD PRODUCT LINE PROGRAMS ALL PSD DEVICES HIGH SPEED PROGRAMMING CONTROLLED VIA PC RUNNING ST'S PSDSOFT EXPRESS SOFTWARE INTERCHANGEABLE ADAPTER SOCKETS FOR DIFFERENT PACKAGES/PRODUCT TYPES (ordered separately, see Table 2 for a complete list) SIZE: 9” x 6” x 3” Figure 1. PSD Programmer Table 1. Available Models Programmer Voltage Description PSDpro 110 PSDpro Programmer with 110V Power Supply PSDpro 220 PSDpro Programmer with 220V Power Supply Table 2. Socket Adapters Part Number Pins Socket Family Description WS6100 52 PLCC PSD Socket Adapter for PSD8XX in 52-pin PLCC WS6101 64 TQFP FPSD Socket Adapter for PSD8XX in 64-pin TQFP WS6102 44 PLCC PSD Socket Adapter for PSD2XX and PSD3XX in a 44-pin PLCC WS6103 44 TQFP PSD Socket Adapter for PSD2XX and PSD3XX in a 44-pin TQFP WS6104 44 PQFP PSD Socket Adapter for PSD2XX and PSD3XX in a 44-pin PQFP WS6105 80 TQFP PSD Socket Adapter for PSD4XX and PSD5XX in a 80-pin TQFP WS6106 68 PLCC PSD Socket Adapter for PSD4XX and PSD5XX in a 68-pin PLCC WS6107 52 PQFP FPSD Socket Adapter for PSD8XX in a 52-pin PQFP WS6108 80 TQFP FPSD Socket Adapter for PSD8XX and PSD4000 in a 80-pin TQFP June 2004 For further information contact your local ST sales office. 1/6 PSDPRO - PARALLEL PORT PROGRAMMER TABLE OF CONTENTS FEATURES SUMMARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Figure 1. PSD Programmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table 1. Available Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table 2. Socket Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SUMMARY DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SYSTEM REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Parts List: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PART NUMBERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Table 3. Ordering Information Scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Table 4. Socket Adapters by Package Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 REVISION HISTORY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Table 5. Document Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2/6 PSDPRO - PARALLEL PORT PROGRAMMER SUMMARY DESCRIPTION The PSDpro is a high performance engineering programmer designed to program ST's entire family of PSD products. Through the use of interchangeable sockets, the PSDpro can be configured to program any of ST’s OTP or Flashbased PSD Products. It is controlled using ST's PSDsoft Express software operating in the IBMPC compatible Windows 95/98/2000 or NT/XP environment. The PSDpro enables quick program- ming, greatly accelerating the system design process. The PSDpro is easy to use. The parallel port interface to the host computer eliminates problems with bus addresses, interrupt assignments, or software installation. PSDpro is powered by an external DC power supply SYSTEM REQUIREMENTS Software Must be used with PSDsoft Express software (version 5.02 ES or later) Hardware ■ PC Compatible Windows 95/98/2000 or NT/ XP ■ 32MB of RAM ■ Hard-Disk space: approximately 30MB ■ CD-ROM Drive Parts List: ■ Parallel cable ■ Power supply adapter (110V or 220V) ■ ST Family Module – small edge connector PC board installed atop the programmer prior to shipment ■ PSDpro Programmer INSTALLATION INSTRUCTIONS 1. Connect the parallel cable to the PC and the PSDpro Programmer. 2. Make sure the ST Family module and the Socket Adaptor are firmly seated. 3. Connect the power supply. 4. Go to the main screen of PSDsoft Express and click on the "STMicroelectronics Conventional Programmers" block or Select "STMicroelectronics Conventional Programmers" from the PSDsoft menu. 5. Under the "Options" menu select "Hardware Setup." Configure for PSDpro and choose "Auto Select" or "Manual Select" for the parallel port: – Auto Select = PSDsoft selects the port – Manual Select = User selects the port 6. Select OK. 7. If there are no error messages, then the setup and auto check procedure is completed. 8. If an error message appears, check all connections and retry by repeating the installation procedure or by merely selecting the "H Test" (Hardware Test) icon on the main screen. Note: Repeat this procedure until there is no longer an error message. If you cannot resolve the conflict, contact ST technical support for assistance via Internet Mail at [email protected]. The programming instructions are included in the PSDsoft Express User Manual downloadable from the ST website, www.st.com/psm. Please refer to this manual for programming assistance. 3/6 PSDPRO - PARALLEL PORT PROGRAMMER PART NUMBERING Table 3. Ordering Information Scheme Example: PSDpro 110 Part Type PSDpro = Development Kit Power Supply 110 = 110V 220 = 220V For a list of available options (e.g., speed, package) or for further information on any aspect of this device, please contact your nearest ST Sales Office. Table 4. Socket Adapters by Package Type Pkg Code Pins WS6100 WS6101 WS6102 WS6103 WS6104 WS6105 WS6106 WS6107 WS6108 J 44 ✔ L 44 ✔ M 44 U 44 J 68 ✔ L 68 ✔ U 80 J 52 U 64 PSD8XX M 52 PSD8XX/ PSD4000 U 80 PSD3XX PSD4XX/ PSD5XX PSD8XX 4/6 ✔ ✔ ✔ ✔ ✔ ✔ ✔ PSDPRO - PARALLEL PORT PROGRAMMER REVISION HISTORY Table 5. Document Revision History Date Version 1-Jun-04 1.0 Description First Edition 5/6 PSDPRO - PARALLEL PORT PROGRAMMER Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2004 STMicroelectronics - All rights reserved STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States www.st.com 6/6