STB60NF06 STB60NF06-1 N-channel 60V - 0.014Ω - 60A - D2PAK/I2PAK STripFET™ II Power MOSFET General features Type VDSS RDS(on) ID STB60NF06-1 60V <0.016Ω 60A STB60NF06 60V <0.016Ω 60 3 ■ Exceptional dv/dt capability ■ 100% avalanche tested ■ Application oriented characterization 3 12 1 D2PAK I2PAK Description This Power MOSFET series realized with STMicroelectronics unique STripFET process has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced highefficiency isolated DC-DC converters for Telecom and Computer application. It is also intended for any application with low gate charge drive requirements. Internal schematic diagram Applications ■ Switching application Order codes Part number STB60NF06T4 STB60NF06-1 June 2006 Marking Package B60NF06 Tape & reel 2PAK Tube D B60NF06 I Rev 3 Packaging 2PAK 1/14 www.st.com 14 Contents STB60NF06 - STB60NF06-1 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 ................................................ 8 STB60NF06 - STB60NF06-1 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol VDS VDGR VGS Parameter Value Unit Drain-source voltage (VGS = 0) 60 V Drain-gate voltage (RGS = 20 kΩ) 60 V ± 20 V Gate- source voltage ID Drain current (continuous) at TC = 25°C 60 A ID Drain current (continuous) at TC = 100°C 42 A Drain current (pulsed) 240 A Total dissipation at TC = 25°C 110 W Derating Factor 0.73 W/°C 4 V/ns -65 to 175 °C IDM (1) Ptot dv/dt (2) Tstg Tj Peak diode recovery voltage slope Storage temperature Max. operating junction temperature 1. Pulse width limited by safe operating area. 2. ISD ≤60A, di/dt ≤400A/µs, VDD ≤24V, Tj ≤TJMAX Table 2. Thermal data Rthj-case Thermal resistance junction-case max 1.36 °C/W Rthj-amb Thermal resistance junction-ambient max 62.5 °C/W Maximum lead temperature for soldering purpose 300 °C TJ Table 3. Symbol Avalanche characteristics Parameter Max Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) 30 A EAS Single Pulse Avalanche Energy (starting Tj = 25 °C, ID = IAR, VDD = 30 V) 360 mJ 3/14 Electrical characteristics 2 STB60NF06 - STB60NF06-1 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 4. On/off states Symbol Parameter V(BR)DSS Drain-source breakdown voltage ID = 250µA, VGS =0 IDSS Zero gate voltage drain current (VGS = 0) VDS = Max rating VDS = Max rating, TC = 125°C IGSS Gate-body leakage current (VDS = 0) VGS = ± 20V VGS(th) Gate threshold voltage VDS = VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS = 10V, ID = 30A Table 5. Symbol Test conditions Typ. Max. 60 Unit V 1 10 µA µA ±100 nA 4 V 0.015 0.016 Ω Typ. Max. Unit 2 Dynamic Parameter Test conditions gfs (1) Forward transconductance VDS= 15V, ID = 30A Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance td(on) tr td(off) tf Qg Qgs Qgd Min. 20 S VDS = 25V, f = 1MHz, VGS = 0 1810 360 125 pF pF pF Turn-on delay time Rise time Turn-off delay time Fall time VDD = 30V, ID = 30A RG = 4.7Ω VGS = 10V (see Figure 12) 16 108 43 20 ns ns ns ns Total gate charge Gate-source charge Gate-drain charge VDD = 48V, ID = 60A, VGS = 10V, RG = 4.7Ω (see Figure 13) 49 18 14 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. 4/14 Min. 66 nC nC nC STB60NF06 - STB60NF06-1 Table 6. Symbol Electrical characteristics Source drain diode Parameter ISDM (1) Source-drain current Source-drain current (pulsed) VSD (2) Forward on voltage ISD trr Qrr IRRM Test conditions Min. Typ. ISD = 60A, VGS = 0 Reverse recovery time ISD = 60A, di/dt = 100A/µs, Reverse recovery charge VDD = 25V, Tj = 150°C Reverse recovery current (see Figure 14) 73 182 5 Max. Unit 60 240 A A 1.3 V ns nC A 1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 % 5/14 Electrical characteristics STB60NF06 - STB60NF06-1 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/14 STB60NF06 - STB60NF06-1 Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 11. Source-drain diode forward characteristics 7/14 Test circuit 3 STB60NF06 - STB60NF06-1 Test circuit Figure 12. Switching times test circuit for resistive load Figure 13. Gate charge test circuit Figure 14. Test circuit for inductive load Figure 15. Unclamped Inductive load test switching and diode recovery times circuit Figure 16. Unclamped inductive waveform 8/14 Figure 17. Switching time waveform STB60NF06 - STB60NF06-1 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/14 Package mechanical data STB60NF06 - STB60NF06-1 D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MAX. MIN. A MIN. 4.4 TYP 4.6 0.173 TYP. 0.181 MAX. A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 D1 E 8 10 E1 G 0.368 0.315 10.4 0.393 8.5 0.334 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0.4 0º 0.015 4º 3 V2 1 10/14 STB60NF06 - STB60NF06-1 Package mechanical data TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 11/14 Packing mechanical data 5 STB60NF06 - STB60NF06-1 Packing mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 MAX. D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 * on sales type 12/14 inch 0.933 0.956 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STB60NF06 - STB60NF06-1 6 Revision history Revision history Table 7. Revision history Date Revision Changes 21-Jun-2004 2 Preliminary version 16-Jun-2006 3 New template, no content change. 13/14 STB60NF06 - STB60NF06-1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14