STGF19NC60HD N-channel 600V - 9A - TO-220FP Very fast PowerMESH™ IGBT General features Type VCES STGF19NC60HD 600V VCE(sat) IC @100°C (max)@25°C < 2.5V 9A ■ Low on-voltage drop (Vcesat) ■ Low CRES / CIES ratio (no cross-conduction susceptbility) ■ 3 1 2 TO-220FP Very soft ultra fast recovery antiparallel diode Description Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESH™ IGBTs, with outstanding performances. The suffix "H" identifies a family optimized for high frequency applications in order to achieve very high switching performances (reduced tfall) mantaining a low voltage drop. Internal schematic diagram Applications ■ High frequency motor controls ■ SMPS and PFC in both hard switch and resonant topologies ■ Motor drivers Order codes Part number Marking Package Packaging STGF19NC60HD GF19NC60HD TO-220FP Tube January 2007 Rev 3 1/14 www.st.com Contents STGF19NC60HD Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 7 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 STGF19NC60HD 1 Electrical ratings Electrical ratings Table 1. Symbol Absolute maximum ratings Parameter Value Unit VCES Collector-emitter voltage (VGS = 0) 600 V IC(1) Collector current (continuous) at TC = 25°C 16 A IC(1) Collector current (continuous) at TC = 100°C 9 A Turn-off minimum current 40 A Diode RMS forward current at TC = 25°C 20 A VGE Gate-emitter voltage ±20 V PTOT Total dissipation at TC = 25°C 35 W – 55 to 150 °C Value Unit Thermal resistance junction-case max IGBT 3.9 °C/W Thermal resistance junction-case max DIODE 5.5 °C/W Thermal resistance junction-ambient max 62.5 °C/W ICL (2) IF Tj Operating junction temperature 1. Calculated according to the iterative formula: T –T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------C C R × V (T , I ) THJ – C CESAT ( MAX ) C C 2. Vclamp=480V, Tj=150°C, RG=10Ω, VGE=15V Table 2. Symbol Thermal resistance Parameter Rthj-case Rthj-amb 3/14 Electrical characteristics 2 STGF19NC60HD Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol Parameter VBR(CES) Collector-emitter breakdown voltage VCE(sat) Collector-emitter saturation VGE= 15V, IC= 12A voltage VGE= 15V, IC=12A,Tc=125°C VGE(th) Gate threshold voltage VCE= VGE, IC= 250 µA ICES Collector cut-off current (VGE = 0) VCE= Max rating,TC= 25°C IGES gfs Table 4. Symbol Cies Coes Cres Qg Qge Qgc 4/14 Static Test conditions IC= 1mA, VGE= 0 Min. Typ. Max. 600 Unit V 1.8 1.6 2.5 V V 5.75 V VCE= Max rating,TC= 125°C 150 1 µA mA Gate-emitter leakage current (VCE = 0) VGE= ±20V , VCE= 0 ±100 nA Forward transconductance VCE = 15V, IC= 12A 3.75 5 S Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 5A, VGE = 15V, Figure 17 Min. Typ. Max. Unit 1180 130 36 pF pF pF 53 10 23 nC nC nC STGF19NC60HD Table 5. Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(Voff) tf tr(Voff) td(Voff) tf Table 6. Symbol Eon(1) Eoff(2) Ets Eon(1) Eoff(2) Ets Electrical characteristics Switching on/off (inductive load) Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions Min. VCC = 390V, IC = 12A RG= 10Ω, VGE= 15V, Figure 18 VCC = 390V, IC = 12A RG= 10Ω, VGE= 15V, Tj = 125°C Figure 18 VCC = 390V, IC = 12A RG= 10Ω, VGE= 15V, Figure 18 VCC = 390V, IC = 12A RG= 10Ω, VGE= 15V, Tj = 125°C Figure 18 Typ. Max. Unit 25 7 1600 ns ns A/µs 24 8 1400 ns ns A/µs 27 97 73 ns ns ns 58 144 128 ns ns ns Switching energy (inductive load) Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390V, IC = 12A RG= 10Ω, VGE= 15V, Figure 16 VCC = 390V, IC = 12A RG= 10Ω, VGE= 15V, Tj = 125°C Figure 16 Min. Typ. Max. Unit 85 189 274 µJ µJ µJ 187 407 594 µJ µJ µJ 1. Eon is the turn-on losses when a typical diode is used in the test circuit in Figure 19 If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25°C and 125°C) 2. Turn-off losses include also the tail of the collector current 5/14 Electrical characteristics Table 7. Symbol Collector-emitter diode Parameter Test conditions If = 12A Vf Forward on-voltage trr Reverse recovery time Reverse recovery charge Reverse recovery current Tj = 25°C, di/dt = 100 A/µs Figure 19 Reverse recovery time Reverse recovery charge Reverse recovery current Tj =125°C, di/dt = 100A/µs Figure 19 Qrr Irrm trr Qrr Irrm 6/14 STGF19NC60HD If = 12A, Tj = 125°C If = 12A ,VR = 40V, If = 12A ,VR = 40V, Min. Typ. Max. Unit 1.9 1.5 2.5 V V 31 30 2 ns nC A 59 102 4 ns nC A STGF19NC60HD Electrical characteristics 2.1 Electrical characteristics (curves) Figure 1. Output characteristics Figure 2. Transfer characteristics Figure 3. Transconductance Figure 4. Collector-emitter on voltage vs temperature Figure 5. Gate charge vs gate-source voltage Figure 6. Capacitance variations 7/14 Electrical characteristics STGF19NC60HD Figure 7. Normalized gate threshold voltage vs temperature Figure 8. Collector-emitter on voltage vs collector current Figure 9. Normalized breakdown voltage vs temperature Figure 10. Switching losses vs temperature Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current 8/14 STGF19NC60HD Figure 13. Turn-off SOA Electrical characteristics Figure 14. Emitter-collector diode characteristics Figure 15. Thermal impedance 9/14 Test circuit 3 STGF19NC60HD Test circuit Figure 16. Test circuit for inductive load switching Figure 17. Gate charge test circuit Figure 18. Switching waveform Figure 19. Diode recovery time waveform 10/14 STGF19NC60HD 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 11/14 Package mechanical data STGF19NC60HD TO-220FP MECHANICAL DATA mm. DIM. MIN. A 4.4 inch TYP MAX. MIN. TYP. 4.6 0.173 0.181 MAX. 0.106 B 2.5 2.7 0.098 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 B D A E L7 L3 L6 F2 H G G1 F F1 L7 L2 12/14 L5 1 2 3 L4 STGF19NC60HD 5 Revision history Revision history Table 8. Revision history Date Revision Changes 05-Aug-2006 1 Initial release. 27-Sep-2006 2 New value on Absolute maximum ratings 05-Jan-2007 3 Complete version 13/14 STGF19NC60HD Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14