STK800 N-channel 30V - 0.006Ω - 20A - PolarPAK® STripFET™ Power MOSFET General features Type VDSS RDS(on) RDS(on)*Qg PTOT STK800 30V <0.0078Ω 80.4nC*mΩ 5.2W ■ Ultra low top and bottom junction to case thermal resistance ■ Very low capacitances ■ 100% Rg tested ■ Fully incapsulated die ■ In compliance with the 2002/95/EC european directive PolarPAK® Description This Power MOSFET is the latest development of STMicroelectronics unique “Single Feature Size™” strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, moreover the double sides cooling package with ultra low junction to case thermal resistance allows to handle higher levels of current. Internal schematic diagram Applications ■ Switching application Bottom View Top View Order codes Part number Marking Package Packaging STK800 K800 PolarPAK ® Tape & reel March 2006 Rev 3 1/12 www.st.com 12 Contents STK800 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2/12 ................................................ 8 STK800 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol VDS Parameter Drain-source voltage (VGS = 0) Value Unit 30 V VGS (1) Gate-source voltage ± 16 V VGS(2) Gate-source voltage ± 18 V ID (4) Drain current (continuous) at TC = 25°C 20 A ID Drain current (continuous) at TC = 100°C 12.5 A Drain current (pulsed) 80 A Total dissipation at T C = 25°C 5.2 W 0.0416 W/°C -55 to 150 °C IDM (3) PTOT (4) Derating factor Tj Tstg Operating junction temperature Storage temperature 1. Continuous mode 2. Guaranteed for test time <15ms 3. Pulse width limited by package 4. When mounted on FR-4 board of 1inch2 , 2 oz Cu and ≤ 10sec Table 2. Thermal data Symbol Parameter Rthj-amb(1) Thermal resistance junction-amb Rthj-c(2) Thermal resistance junction-case (top drain) Rthj-c(3) Thermal resistance junction-case (source) Typ. Max. Unit 20 24 °C/W 1 1.2 °C/W 2.8 3.4 °C/W 1. When mounted on FR-4 board of 1inch2 , 2 oz Cu and ≤ 10sec 2. Steady State 3. Measured at Source pin when the device is mounted on FR-4 board in steady state 3/12 Electrical characteristics 2 STK800 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown voltage Test condictions ID = 250µA, VGS= 0 Zero gate voltage drain current (V GS = 0) IGSS Gate body leakage current (V DS = 0) VGS = ±16V VGS(th) Gate threshold voltage VDS= VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS= 10V, ID= 10A Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Max. 30 1 1 10 µA µA ±100 nA 2.5 V 0.006 0.0078 0.0075 0.0098 VGS= 4.5V, ID= 10A Unit V VDS = Max rating,Tc=125°C Ω Ω Dynamic Parameter Test condictions Forward transconductance VDS =15V, ID = 10 A Input capacitance Output capacitance Reverse transfer capacitance VDS =25V, f=1 MHz, VGS=0 Total gate charge Gate-source charge Gate-drain charge VDD=15V, ID = 20A VGS =4.5V (see Figure 14) 1. Pulsed: pulse duration = 300µs, duty cycle 1.5% 4/12 Typ. VDS = Max rating, IDSS Table 4. Min. Min. Typ. Max. Unit 44 S 1380 450 75 pF pF pF 13.4 3.4 4.5 nC nC nC STK800 Electrical characteristics Table 5. Switching times Symbol Parameter td(on) tr td(off) tf Table 6. Symbol Turn-on delay time Rise time Turn-off delay time Fall time Test condictions VDD = 15V, ID= 10A, RG=4.7Ω, VGS=4.5V (see Figure 15) VDD =15V, ID= 10A, RG=4.7Ω, VGS=4.5V (see Figure 15) Parameter Test condictions ISDM(1) VSD(2) Forward on Voltage ISD= 20A, V GS=0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD= 20A, di/dt = 100A/µs, VDD=20V, Tj=150°C trr Qrr IRRM Typ. Max. Unit 15 50 ns ns 45 15 ns ns Source drain diode Source-drain current Source-drain current (pulsed) ISD Min. (see Figure 15) Min. Typ. 32 28.8 1.8 Max. Unit 20 80 A A 1.2 V ns nC A 1. Pulse width limited by package 2. Pulsed: pulse duration = 300µs, duty cycle 1.5% 5/12 Electrical characteristics STK800 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/12 STK800 Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Figure 11. Source-drain diode forward characteristics Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 12. Normalized BVDSS vs temperature 7/12 Test circuit 3 STK800 Test circuit Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform 8/12 Figure 18. Switching time waveform STK800 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/12 Package mechanical data STK800 PolarPAK® (Option “S”) MECHANICAL DATA REF. A A1 b1 b2 b3 b4 b5 c D D1 E E1 H1 H2 H3 H4 K1 K4 M1 M2 M3 M4 P1 T1 T2 T3 T4 T5 < 10/12 MIN. mm TYP. 0.75 0.80 0.48 0.41 2.19 0.89 0.23 0.20 6 5.74 5.01 4.75 0.23 0.45 0.31 0.45 4.22 0.24 4.30 3.43 0.22 0.05 0.15 3.48 0.56 1.20 3.90 0.58 0.51 2.29 1.04 0.33 0.25 6.15 5.89 5.16 4.90 0° MAX. MIN. inch TYP. 0.85 0.05 0.68 0.61 2.39 1.19 0.43 0.30 6.30 6.04 5.31 5.05 0.030 0.031 0.019 0.016 0.086 0.035 0.009 0.008 0.236 0.226 0.197 0.187 0.009 0.020 0.012 0.020 0.166 0.009 0.169 0.135 0.009 0.002 0.006 0.137 0.022 0.051 0.154 0.023 0.020 0.090 0.041 0.013 0.010 0.242 0.232 0.203 0.193 4.37 0.56 0.51 0.56 4.52 4.50 3.58 4.70 3.73 0.20 3.64 0.76 0.25 4.10 0.95 0.18 10° 0.36 12° 0.41 0° MAX. 0.033 0.002 0.027 0.024 0.094 0.047 0.017 0.012 0.248 0.238 0.209 0.199 0.172 0.022 0.020 0.022 0.178 0.177 0.141 0.185 0.147 0.008 0.143 0.030 0.010 0.150 0.037 0.007 10° 0.014 12° 0.016 STK800 5 Revision history Revision history Table 7. Revision history Date Revision Changes 09-Nov-2005 1 First version 02-Feb-2006 2 Complete datasheet 21-Mar-2006 3 New template 11/12 STK800 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 12/12