Version 1.3 File:TFS270B.doc VI TELEFILTER 21.05.2001 Filter specification TFS 270 B 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance input: Terminating impedance output : ext. coil pin 4: °C dBm 440 Ω II –1,40 pF 440 Ω II –1,40 pF 120 nH 23 0 Characteristics Remark: Reference level for the relative attenuation arel of the TFS 270B is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae.The nominal frequency fN is fixed on 270,000 MHz without tolerance. The values of the pass band ripple and the relative attenuation arel are guaranteed in the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the measurement tolerance scheme. Preliminary Data typ. value Insertion loss (Reference level) ae = amin 3 Nominal frequency fN - dB tolerance / limit max 5 270,0 dB MHz Pass band ripple fN - 70 kHz ... fN + 70 kHz fN - 90 kHz ... fN + 90 kHz Relative attenuation 0,5 1,0 2 3 dB dB dB dB dB min 20 min 27 min 40 dB dB dB µs max µs arel 270,0 MHz ± 400 kHz ... 270,0 MHz ± 600 kHz 270,0 MHz ± 600 kHz ... 270,0 MHz ± 1,0 MHz 270,0 MHz ± 1,0 MHz ... 270,0 MHz ± 30 MHz Group delay distortion 270,0 MHz ± 70 max max 30 40 50 GDD kHz 0,5 - 20 °C ... + 85 °C Operating temperature range - 30 °C ... + 85 °C Storage temperature range Temperature coefficient of frequency Frequency inversion temperature 2 TCf - 0,036 ppm/K² + 25 °C - Generated: Checked / approved: VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Version 1.3 File:TFS270B.doc VI TELEFILTER 21.05.2001 Filter specification TFS 270 B Construction, pin configuration and 50 Ω - matching network (All dimensions in mm) 5.0 SQ 7 +0.15 -0.1 5 270 B N21 1 3 Date code Pin 1 Pin 2 Pin 3 Pin 4 Sym. Output Sym. Output External Coil Package Ground Pin 5 Pin 6 Pin 7 Pin 8 Datecode: L M N ... Sym. Input Sym. Input Ground Package ground Year+week 1999 2000 2001 50 Ohm Test circuit 1 LB-IN L1 6 SAW C1 LB-OUT C2 2 5 L2 L3 1 L4 3 L5 4, 7, 8 50 Ohm Test circuit 2 C1 C3 LB-IN 6 SAW L1 LB-OUT 1 L2 2 5 C2 C4 3 4, 7, 8 L3 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. 2/5 Version 1.3 File:TFS270B.doc VI TELEFILTER 21.05.2001 Filter specification TFS 270 B 3/5 Stability Characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Damp heat: (cycle) 25 °C to 55°C / 95% r.H. / 10 cycles DIN IEC 68 - 2 – 30 Db 4. Resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer Tape (all dimensions in mm) W : 12 ± 0,3 Po : 4 ± 0,1 Do : 1,5 + 0,1 E : 1,75 ± 0,1 F : G (min) : P2 : P1 : EMBOSSED CARRIER TAPE Do Po P2 E Ao 5,5 ± 0,05 0,75 2 F D1 CT ± 0,05 8 3000 min 300 mm min 500 mm min 300 mm W Bo ± 0,1 G D1(min) : 1,5 Ao : 5,3 ± 0,1 Bo : 5,3 ± 0,1 CT : 9,5 ± 0,1 P1 COVER TAPE W 2 Reel (all dimensions in mm): A : W1 W2 (max) : : N (min) : 330 12,4 + 0,2 18,4 50 C C : 13 ± 0,2 A N W 1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape. VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Version 1.3 File:TFS270B.doc VI TELEFILTER 21.05.2001 Filter specification TFS 270 B Air reflow temperature conditions 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 °C - 170 °C 60 sec. - 90 sec. main-heating periods over 200 °C 20 sec. - 25 sec. peak temperature 255 °C ± 5 °C Chip-mount air reflow profile 260 240 220 200 temperature / °C 180 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time / sec. Table for temperature vs. time during the air reflow process Tolerance of temperatures: ± 5 °C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / °C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / °C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. 4/5 Version 1.3 File:TFS270B.doc VI TELEFILTER 21.05.2001 Filter specification TFS 270 B History Version Reason of Changes Name Date 1.3 - Add history. - Change date code from month to week. - Correct tape and reel information. Dr. Wall 21.05.2001 VI TELEFILTER Vectron International, Inc. Potsdamer Straße 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: [email protected] E-Mail: [email protected] VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. 5/5