MACOM SO63-2-55-GA-CL

SPECIFICATION CONTROL DRAWING
Product Revision
Product
Name
SO63-1-55-GA-CL
Product Dimensions
Cable Dimensions
øB
øC
H
øE
øF
øG
øD
A1.75
min
min
min
max
min
min
max
(A0.07)
*
16.5
1.90
2.65
8.25
2.65
0.90
0.50
1.90
(0.650)
(0.075) (0.105) (0.325) (0.105) (0.035) (0.020) (0.075)
SO63-2-55-GA-CL * SO632R
16.5
2.65
3.68
8.25
3.68
1.40
0.75
2.65
(0.650)
(0.105) (0.145) (0.325) (0.145) (0.055) (0.030) (0.105)
SO63-3-55-GA-CL * SO633R
16.5
4.30
5.08
8.25
5.08
2.15
1.25
4.30
(0.650)
(0.170) (0.200) (0.325) (0.200) (0.085) (0.050) (0.170)
SO63-4-55-GA-CL * SO634R
19.1
5.95
6.45
8.25
6.45
3.30
1.80
5.95
(0.750)
(0.235) (0.255) (0.325) (0.255) (0.130) (0.070) (0.235)
SO63-5-55-GA-CL * SO635R
19.1
7.00
7.6
8.25
7.6
4.30
2.50
7.00
(0.750)
(0.275) (0.300) (0.325) (0.300) (0.170) (0.100) (0.275)
* Consult Raychem for individual product revision. Contains more than 1 part name.
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER:
TYPE Sn63 per ANSI-J-STD-006.
FLUX:
TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Fusible ring, melt point: 221C.
3. MELTABLE RING: Environment resistant thermoplastic. Color:blue.
4. GROUND LEAD: MIL-W-22759/32-GA-CL. See part number guide for gauge and color information.
Ident.
Code
SO631R
J0.5
(J0.02)
7.5
(0.295)
7.5
(0.295)
7.5
(0.295)
7.5
(0.295)
7.5
(0.295)
APPLICATION
1. These parts will provide a shield termination assembly which will meet the requirements of MIL-S-83519/2 when installed in
accordance with Raychem RCPS-100-70 on cables rated for at least 125C, meeting the dimensional criteria listed, having tin or
silver plated shields. See M83519 or consult Raychem for compatible insulation material.
2. Temperature rating: -55C to +150C.
For best results, prepare the cable as shown:
Part Number Guide:
SO63-A-55-GA-CL
Lead color designation per MIL-STD-681.
Standard color: -90 white with black stripe.
For availability of other colors, consult Raychem.
Lead AWG 18, 20, 22, 24, 26.
Lead type: M22759/32 (Raychem 55A0111).
Size 1 to 5.
Parts shall be noted with identification code per table.
“G” is the minimum diameter on which the sleeve will seal.
* A trademark of TE Connectivity.
TE Connectivity
300 Constitutional Drive
Menlo Park, CA 94025 USA
RAYCHEM
SOLDERSLEEVE* DEVICE
WITH PRE-INSTALLED LEAD
IMMERSION RESISTANT
DOCUMENT NO.: SO63-A-55-GA-CL
TITLE:
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES:
ANGLES: N/A
DATE:
TE Connectivity reserves the right to amend this
0.00 N/A
drawing at any time. Users should evaluate the
0.0 N/A
ROUGHNESS IN
suitability of the product for their application.
0 N/A
MICRON
DRAWN BY:
CAGE CODE:
REPLACES:
DCR NUMBER:
M. FORONDA
06090
D981087
D981962
DOC ISSUE:
16-Apr-11
PROD. REV.:
SEE TABLE
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.
8
SCALE:
None
SIZE:
A
SHEET:
1 of 1