PANDUIT 621056-000

SPECIFICATION CONTROL DRAWING
Product Revisions
Product
Name
D-142-50
J
NAS
Equiv.
1745-14
D-142-51
J
1745-15
D-142-52
J
1745-16
L1.52
(L±0.06)
15.75
(0.620)
15.75
(0.620)
19.05
(0.750)
Product Dimensions
B
min
2.80
(0.110)
4.45
(0.175)
7.11
(0.280)
C
min
3.175
(0.125)
5.08
(0.200)
7.62
(0.300)
Cable Dimensions
D
E
max
min
3.175
1.40
(0.125)
(0.055)
5.08
2.54
(0.200)
(0.100)
7.62
4.06
(0.300)
(0.160)
MATERIALS
1. INSULATION SLEEVE: Heat shrinkable, radiation cross-linked polyvinylidene fluoride.
Color: natural.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Cd18 per ANSI J-STD-006.
FLUX:
TYPE ROL1 per ANSI J-STD-004.
3. MELTABLE RINGS: Thermally stabilized thermoplastic, one clear and one blue.
APPLICATION
1. These parts are designed for shield terminations on cables having tin or silver plated shields and
insulations rated for at least 105C and falling within size range listed.
2. These parts are designed to meet the requirements of Raychem Specification RT-1404. They also
comply with National Aerospace Standard Part Drawing NAS-1745.
See table above for equivalent size.
3. For installation techniques, see Raychem Assembly Procedure RCPS 100-70.
4. For other sizes available in this configuration, see Raychem Devices Specification Control Drawings
D-142-56, -65 & -66.
For best results, prepare
the cable as shown:
TITLE:
THERMOFIT
DEVICES
(105°C) SOLDERSLEEVE
LOW TEMPERATURE
300 Constitution Drive
Menlo Park, CA 94025, USA
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES:
ANGLES: N/A
TE Connectivity reserves the right to amend
0.00 N/A
this drawing at any time. Users should evaluate
0.0 N/A
ROUGHNESS IN
the suitability of the product for their
0 N/A
MICRON
application.
DOCUMENT NO.:
D-142-50/-51/-52
DCR NUMBER:
REPLACES:
D000400
DRAWN BY:
DATE:
PROD. REV.
DOC ISSUE:
SCALE:
M. FORONDA
17-Jul-00
SEE TABLE
2
None
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.
N/A
SIZE:
A
SHEET:
1 of 1