Features ● ● ● ● ● ● Unregulated Converters 1:1 Input Range Efficiency up to 84% 2kVDC and 3kVDC Isolation Option Approved for Medical Applications -40°C to +90°C Operating Temperature Range 2W SMD Package ECONOLINE DC/DC-Converter Selection Guide Part Isolation Input Output Output Number Voltage Voltage Voltage Current Efficiency Load (kV) (VDC) (VDC) (mA) (max.) (max.) RTM-0505S* 2 5 5 400 79% 2200µF RTM-1205S* 2 12 5 400 83% 2200µF RTM-2405S* 2 24 5 400 84% 2200µF SMD Capacitive 2 Watt SMD Single Output * add Suffix “/H“ for 3kVDC/1sec. Isolation e.g. RTM-0505S/H * add Suffix “-R“ for tape&reel packing e.g. RTM-1205S-R or RTM-2405S/H-R Specifications (measured at TA = 25°C, nominal input voltage and rated output current unless otherwise specified Input Voltage Range ±10% max. Output Voltage Accuracy -1% typ., ±5% max. Line Voltage Regulation (low line to high line at max. load) Load Voltage Regulation (10% to 100% full load) Output Ripple and Noise (20MHz BW limited) 10% typ., 15% max. 50mVp-p typ., 100mVp-p max. Operating Frequency (Vin=nominal input) 20kHz min. / 40kHz typ. / 80kHz max. Efficiency at Full Load Specifications valid for 10% minimum load only Isolation Voltage RTM-xx05S (tested for 1 second) 2000 VDC RTM-xx05S/H (tested for 1 second) 3000 VDC Isolation Capacitance (Viso=500V) 15GΩ min. Short-Circuit Protection 1 second Operating Temperature Range with Derating -40°C to +90°C Storage Temperature -55°C to +125°C Reflow Temperature RoHS compliant Vapour Phase Process (for more details see Application Notes) (Ambient Temperature) 230°C (90 sec.) max. 100 1.4g Packing Quantity All Types 27 pcs per Tube All Types 500 pcs per Reel Detailed Information see Application Notes chapter "MTBF" using MIL-HDBK 217F 3907 x 10³ hours using MIL-HDBK 217F 313 x 10³ hours Output Power (%) 95% RH Package Weight 80 60 50 40 Report: MDD1112018 + RM1112018 IEC/EN 60601-1 3rd Edition Medical Report + ISO14971 Risk Assessment EN General Safety Safe Operating Area 20 0 Certifications EN Medical Safety Derating-Graph 245°C (30 sec.), Peak 255°C (5sec.) max. Relative Humidity MTBF (+85°C) RTM 30pF typ., 50pF max. Isolation Resistance } EN-60601-1 Certified EN-60950-1 Certified see Selection Guide Minimum Load = 0% MTBF (+25°C) RoHS 2011/65/EU 6/6 1.2% typ. -40 0 50 90100 150 Operating Temperature °C EN60950-1, 2nd Edition Note 1: Maximum capacitive load is defined as the capacitive load tha will allow start up in under Refer to Application Notes 1 second without damage to the converter. www.recom-international.com REV:1/2012 E-81 RTM Series ECONOLINE DC/DC-Converter Typical Characteristics RTM-xx05S Tolerance Envelope 100 Typical L o ad Line +5% 80 1% 5% Output Voltage 25 2405 Deviation from Nominal (%) +5% V Nom. Deviation / Load Efficiency / Load Efficiency % +10% 0505 60 1205 40 20 10% 50% 0 100% 0% Output Load Current (%) 20% 40% 80% 60% Total Output current (%) 100% 20 15 0505 10 2405 5 0 1205 -5 -10 0% 20% 40% 80% 60% Total Output current (%) 100% Package Style and Pinning 8.70 18.00 7.15 3rd angle projection 4.05 max. 10.65 1.27x13 Pin Connections Pin # Function 1 28 27 17 16 15 RECOM RTM-xx05S RTM 9.00 -Vin 12 -Vout 13 +Vout 14~17 NC 27,28 NC NC = No Connection Pb 0.50 pin width 12 +Vin 2 1.27 Unit: Tolerance: 12 13 14 mm ± 0.25 mm EMC Filtering - Suggestion for EN55022 Class B 470pF/4kVDC DC Input + GND E-82 Output C1 DC Input Voltage Inductance/ Capacitance (C1) 5V 4.7µF 12V 2.2µF 24V 47µF GND REV: 1/2012 www.recom-electronic.com