STD20NF06L STD20NF06L-1 N-channel 60V - 0.032Ω - 24A - DPAK - IPAK STripFET™ II Power MOSFET General features ■ Type VDSS RDS(on) ID STD20NF06L 60V <0.040Ω 24A STD20NF06L-1 60V <0.040Ω 24A Exceptional dv/dt capability 3 3 2 1 ■ 100% avalanche tested ■ Application oriented characterization DPAK 1 IPAK Description This Power MOSFET is the latest development of STMicroelectronics unique “Single Feature Size™” stripbased process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Internal schematic diagram Applications ■ Switching application Order codes Part number Marking Package Packaging STD20NF06L D20NF06L DPAK Tape & reel STD20NF06L-1 D20NF06L-1 IPAK Tube July 2006 Rev 4 1/14 www.st.com 14 Contents STD20NF06L - STD20NF06L-1 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 .............................................. 8 STD20NF06L - STD20NF06L-1 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol Parameter VDS Drain-source voltage (VGS = 0) VGS Gate-source voltage Value Unit 60 V ± 18 V ID Drain current (continuous) at TC = 25°C 24 A ID Drain current (continuous) at TC = 100°C 17 A IDM (1) Drain current (pulsed) 96 A PTOT Total dissipation at TC = 25°C 60 W Derating factor 0.4 W/°C dv/dt (2) Peak diode recovery voltage slope 10 V/ns EAS (3) Single pulse avalanche energy 225 mJ Tj Operating junction temperature Storage temperature -55 to 175 °C Value Unit Rthj-case Thermal resistance junction-case Max 2.5 °C/W Rthj-pcb(1) Thermal resistance junction-pcb Max 50 °C/W Maximum lead temperature for soldering purpose 275 °C Tstg 1. Pulse width limited by safe operating area 2. ISD < 24A, di/dt < 300A/ns, VDD = 80% V(BR)DSS 3. Starting Tj = 25°C, ID = IAR, VDD = 60V Table 2. Symbol Tl Thermal data Parameter 1. When mounted on 1 inch² FR-4 board, 2 oz of Cu 3/14 Electrical characteristics 2 STD20NF06L - STD20NF06L-1 Electrical characteristics (Tcase =25°C unless otherwise specified) Table 3. Symbol V(BR)DSS Test conditions Drain-source breakdown ID = 250µA, VGS= 0 voltage IGSS Gate body leakage current (VDS = 0) VGS = ±18V VGS(th) Gate threshold voltage VDS= VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS= 5V, ID= 12A gfs (1) Ciss Coss Crss Qg Qgs Qgd Min. Typ. Max. 60 1 10 µA µA ±100 nA 2.5 V 0.032 0.040 0.050 Ω Ω Typ. Max. Unit VDS = Max rating,Tc = 125°C 1 VGS= 10V, ID= 12A Unit V VDS = Max rating, Zero gate voltage drain current (VGS = 0) Symbol 4/14 Parameter IDSS Table 4. 1. On /off states Dynamic Parameter Test conditions Min. Forward transconductance VDS =25V, ID = 12A 20 S Input capacitance Output capacitance Reverse transfer capacitance VDS =25V, f=1MHz, VGS=0 660 170 70 pF pF pF 13 3.5 8 nC nC nC Total gate charge Gate-source charge Gate-drain charge VDD=30V, ID = 20A VGS =10V (see Figure 12) Pulsed: pulse duration = 300µs, duty cycle 1.5% STD20NF06L - STD20NF06L-1 Electrical characteristics Table 5. Switching times Symbol Parameter td(on) tr td(off) tf Table 6. Turn-on delay time Rise time Turn-off delay time Fall time Parameter ISD Source-drain current Source-drain current (pulsed) VSD (1) trr Qrr IRRM Min. Typ. Max Unit 11 50 20 12 VDD=30V, ID=10A, RG=4.7Ω, VGS=10V (see Figure 13) ns ns ns ns Source drain diode Symbol ISDM Test conditions Test conditions Forward on voltage ISD=20A, VGS=0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD=20A, di/dt = 100A/µs, VDD=20V, Tj=150°C (see Figure 16) Min. Typ. 56 108 4 Max. Unit 24 96 A A 1.5 V ns nC A 1. Pulsed: pulse duration = 300µs, duty cycle 1.5% 5/14 Electrical characteristics STD20NF06L - STD20NF06L-1 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Normalized BVDSS vs temperature Figure 6. Static drain-source on resistance 6/14 STD20NF06L - STD20NF06L-1 Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Capacitance variations Figure 10. Normalized on resistance vs temperature 7/14 Test circuits 3 STD20NF06L - STD20NF06L-1 Test circuits Figure 11. Switching times test circuit for resistive load Figure 12. Gate charge test circuit Figure 13. Test circuit for inductive load Figure 14. Unclamped inductive load test switching and diode recovery times circuit Figure 15. Unclamped inductive waveform 8/14 Figure 16. Switching time waveform STD20NF06L - STD20NF06L-1 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at : www.st.com 9/14 Package mechanical data STD20NF06L - STD20NF06L-1 TO-251 (IPAK) MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 2.2 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A3 0.7 1.3 0.027 0.051 B 0.64 0.9 0.025 0.031 B2 5.2 5.4 0.204 0.212 B3 0.85 B5 0.033 0.3 0.012 B6 0.95 C 0.45 C2 0.48 D 6 E 6.4 6.6 0.037 0.6 0.017 0.023 0.6 0.019 0.023 6.2 0.236 0.244 0.252 0.260 G 4.4 4.6 0.173 0.181 H 15.9 16.3 0.626 0.641 L 9 9.4 0.354 0.370 L1 0.8 1.2 0.031 0.047 L2 0.8 1 0.031 0.039 A1 C2 A3 A C H B B3 = 1 = 2 G = = = E B2 = 3 B5 L D B6 L2 L1 0068771-E 10/14 STD20NF06L - STD20NF06L-1 Package mechanical data DPAK MECHANICAL DATA mm. inch DIM. MIN. A A1 A2 B b4 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 TYP 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 MAX. MIN. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 6.6 0.252 5.1 6.4 0.260 0.173 0.368 0.039 2.8 0.8 0.181 0.397 0.110 0.031 1 0.023 0.2 0° 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.185 0.090 4.6 10.1 0.6 MAX. 0.200 4.7 2.28 4.4 9.35 1 TYP. 0.039 0.008 8° 0° 8° 0068772-F 11/14 Packing mechanical data 5 STD20NF06L - STD20NF06L-1 Packing mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 D 12/14 inch 1.5 D1 1.5 E 1.65 MIN. MAX. 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 0.059 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 W 15.7 1.574 16.3 0.618 0.641 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 STD20NF06L - STD20NF06L-1 6 Revision history Revision history Table 7. Revision history Date Revision Changes 19-Apr-2005 2 Added package IPAK 08-Jun-2006 3 Graphical updates 03-Jul-2006 4 New template, no content change 13/14 STD20NF06L - STD20NF06L-1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14